李光鑫,陈勇,李银铭,王毅,徐茂航,刘海
Li Guangxin,Chen Yong,Li Yinming,Wang Yi,Xu Maohang,Liu Hai

• 1:河北工业大学机械工程学院
• 2:河北欧耐机械模具有限公司
• 3:青岛贝科新能源科技有限公司

摘要(Abstract)：

为了更准确全面地研究变齿厚涡旋盘实际运转时的应力应变情况,以某型涡旋压缩机为例,根据变齿厚型线方程几何理论,计算排气时刻各工作腔的容积,确定吸、排气工作腔的气体压力载荷以及进、排气工作温度载荷。采用Creo曲线方程建立精确的变齿厚涡旋盘模型,基于有限元理论和气-热-固间接耦合法,分析在气体压力载荷、温度载荷以及接触力载荷综合作用下动涡旋盘齿的应力及应变,并对比分析了不同载荷对轴向、径向变形的影响规律。得出相比于温度载荷,在气-热载荷作用下,涡旋盘齿的应力增大1.03倍,变形量增大75%。接触力载荷对涡旋齿的应力、总变形影响甚微。受载荷分布影响,随着渐开线展开角的展开,涡旋齿总变形量逐渐减小。
In order to study the stress and strain changes of the variable tooth thickness scroll members in practical operation more accurately and comprehensively,by taking a certain type of scroll compressor as an example and according to the geometric theory of variable tooth thickness profile equations,the volume of each working chamber at exhaust moment was calculated,and the suction and exhaust gas pressure and temperature of the working chamber were determined. The model of variable tooth thickness scroll member was accurately using Creo curve equation. The stress and strain of the orbiting scroll member under the combined action of gas pressure load,temperature load and contact force load were analyzed based on the finite element theory and gasthermal-solid indirect coupling method,and the influencing rules of different loads on axial and radial deformation were compared and analyzed. It was concluded that compared with temperature load,under the action of gas-thermal loads,the stress of the scroll tooth was increased by 1.01 times and the deformation was increased by 69.64%. The contact force has little effect on the stress and total deformation of the scroll teeth. Under the influence of load distribution,the total deformation of the scroll teeth decreases with the expansion of the involute expansion angle.

关键词(KeyWords)： 涡旋压缩机;变齿厚;热固耦合;应力分布;变形规律
scroll compressor;variable tooth thickness;thermal-mechanical coupling;stress distribution;deformation rule

Abstract:

Keywords:

基金项目(Foundation): 河北省重点研发计划自筹项目(16212213);; 河北省全职引进高端人才项目(20181228)

作者(Author): 李光鑫,陈勇,李银铭,王毅,徐茂航,刘海
Li Guangxin,Chen Yong,Li Yinming,Wang Yi,Xu Maohang,Liu Hai

参考文献(References)：

• [1]刘振全,戚智勇.涡旋压缩机动涡旋盘应力及变形的研究[J].流体机械,1995(10):23-26.
• [2]杜涛,孟晓磊,唐景春.电动汽车空调涡旋压缩机的变齿厚结构分析[J].低温与超导,2016(7):63-66.
• [3]金丹,陈旭,田涛.非均匀温度场下涡旋压缩机动涡盘的应力及变形分析[J].流体机械,2003,31(6):11-13.
• [4]王立存,董光辉,张国进,等.基于MATLAB、UG的泛函通用型线涡旋盘有限元建模及分析[J].流体机械,2016,44(2):29-33.
• [5]王君,张娜,刘凯,等.基于流场模拟的涡旋压缩机涡齿应力变形分析[J].工程热物理学报,2012,33(8):1334-1337.
• [6]李超,谢文君,赵嫚.不同载荷及结构对涡旋齿强度影响的有限元分析[J].机械工程学报,2015,51(6):189-197.
• [7]Hiwata A,Futagami Y,Morimoto T,et al.Deformation control of scroll compressor for CO2 refrigerant[J].Transactions of the Japan Society of Refrigerating&Air Conditioning Engineers,2010,27(2):75-86.
• [8]李超,谢文君,赵嫚.多场耦合作用下动涡旋盘的变形和应力研究[J].流体机械,2013,41(1):16-20.
• [9]贾卿晨.涡旋压缩机变齿厚结构优化研究[D].合肥:合肥工业大学,2017.
• [10]Liu Y,Tang Y,Chang Y,et al. Optimum design of scroll profiles created from involute of circle with variable radii by using finite element analysis[J].Mechanism&Machine Theory,2012,55(55):1-17.
• [11]彭斌,李要红,赵生显,等.基于圆渐开线涡旋膨胀机几何模型的研究[J].流体机械,2017,45(10):18-24.
• [12]钱勋波,罗立宏.一种保持特征的网格简化算法[J].机电工程,2017,34(10):1224-1228.
• [13]曹华军,舒林森,许磊,等.复杂机械零件的六面体有限元网格生成方法[J].机械工程学报,2014,50(15):113-118.