王建中,陈曦,张华
WANG Jian-zhong,CHEN Xi,ZHANG Hua(University of Shanghai for Science&Technology

• 1:上海理工大学

摘要(Abstract)：

现代长寿命特林制冷机几乎都采用间隙密封、直线电机驱动和柔性板弹簧支撑技术,特别是还采用静压气体轴承以弥补柔性板弹簧刚度不足的缺点,消除摩擦,提高其寿命。本文分析了长寿命自由活塞斯特林制冷机中静压气体轴承的结构和性能影响因素以及其对制冷机性能的影响,为以后的研究提供帮助。最后,提出了以后的研究方向和重点。
In order to eliminate friction,improve cooler′s life,modern long life Stirling coolers use clearance seals,linear motors and flexure bearing.Especially,some employ aerostatic bearings to offset the low stiffness of flexure bearings.The structure and the influencing factors on aerostatic bearings performance are analyzed in detail in long life FPSCs,and effect on Stirling cooler′s performance was also discussed,which provide helps for the later research.At last,the research direction and key of future are pointed out.

关键词(KeyWords)： 静压气体轴承;刚度;长寿命;斯特林制冷机
aerostatic bearing;stiffness;long life;stirling cooler

Abstract:

Keywords:

基金项目(Foundation): 国家自然科学基金资助项目(50906054);; 上海市教育委员会科研创新项目资助(10YZ96);; 教育部博士点基金资助(20093120120006)

作者(Author): 王建中,陈曦,张华
WANG Jian-zhong,CHEN Xi,ZHANG Hua(University of Shanghai for Science&Technology

参考文献(References)：

• [1]陈国邦,汤珂.小型低温制冷机原理[M].北京:科学出版社,2009:125-163.
• [2]Kuo D T,Loc A S,Hanes M.Gas Bearing Implementa-tion of Small Cryocooler Compressor[C].Advances inCryogenic Engineering,Keystone,Colorado:2005:687-695.
• [3]Hanes M.Performance and Reliability Improvementsin a Low-Cost Stirling Cycle Cryocooler[J].Cryocool-ers,2001,11:87-95.
• [4]Meijers M,Benschop A A J,Mollie J C.High reliabili-ty coolers under development at signaal-USFA[C].Cryocoolers,keystone,Colorado:2002:111-118.
• [5]Pwell J.W.Design of Aerostatics Bearings[M].Lon-don:Machinery Publishing Co,1970.
• [6]龙威.平面空气静压轴承承载特性研究[D].哈尔滨:哈尔滨工业大学,2010.
• [7]Reuven Z-M Unger.Gas Bearing and Method of Mak-ing a Gas Bearing for a Free Piston Machine:US,US6293184 B1[P].Sep.25,2001.
• [8]刘京.自由活塞热气机用气体轴承的性能计算与设计[D].上海:中国舰船研究院,2004.
• [9]William T Beale,Nicholas R van der,Reuven Z Un-ger.Fluid Bearing with Compliant Linkage for Center-ing Reciprocating Bodies:US,5525845[P].Jun.11,1996.
• [10]Niels O Young.Liner Motor Compressor with Clear-ance Seals and Gas Bearings:US,4545738[P].Oct.8,1985.
• [11]庞志成.液体气体静压技术[M].黑龙江人民出版社,1981:360-374
• [12]Constantinescu V N.Gas Lubrication[M].NewYork:ASME,1969.
• [13]William A Gross.Fluid film lubrication[M].NewYork:John Willey&Sons,1980.
• [14]彭万欢.静压气体径向轴承的动静特性研究[D].绵阳:中国工程物理研究院,2006.
• [15]李群霞.高精度静压气体轴承静特性及振动特性的研究[D].哈尔滨:东北林业大学,2004.
• [16]Belforte G,Raparelli T,Viktorov V,Trivella A.Discharge Coefficients of Orifice Type Restrictor forAerostatic Bearings[J].Tribology International,2007,40:512-521.
• [17]Neves M T,Schwarz V A,Menon G J.Discharge co-efficient influence on the performance of aerostaticjournal bearings[J].Tribology International,2010,43:746-751.
• [18]Kichiye Habata.Theoretical Pressure Distribution inJournal Bearings[J].Journal of Applied Machanics,1961,12:54-60.