胡斌,王文毅,李祁光,王凯,曹锋
HU Bin,WANG Wen-yi,LI Qi-guang,WANG Kai,Cao Feng(Xi'an Jiaotong University

• 1:西安交通大学

摘要(Abstract)：

对不同运行工况和几何参数下双螺杆多相混输泵的压力分布进行了模拟计算,并和已发表文献中的试验数据进行了分析比较,验证了所建立的数学模型。并得出随入口压力增高,压差增大,转子转速升高,泵间隙减小双螺杆多相混输泵内压力变化曲线曲率增大;低入口含气率下随入口含气率升高压力变化曲线曲率增大,高入口含气率情况下则相反;相同螺距下转子长度越长压力变化曲线越平坦。
The pressure distribution of twin-screw multiphase pumps is simulated numerically under different working conditions and geometrical parameters.By comparing the simulation results and the experimental data in literatures which have already been published,the model to simulate the working process is verified under different working conditions.The curvature of pressure distribution curve in the twin-screw pump enlarged as the suction pressure and pressure difference increased.The increase of rotate speed and the decrease of clearance size also made the pressure distribution curve steeper.On low gas volume fraction conditions the curvature of pressure distribution curve increased as the gas volume fraction enhanced,while the conclusion is opposite under high gas volume fraction conditions.At the same screw length,pressure distribution along the axial direction of the rotor became more and more plainness as the rotor length increased.

关键词(KeyWords)： 双螺杆多相混输泵;压力分布;数学模型
twin-screw multiphase pump;pressure distribution;mathematical model

Abstract:

Keywords:

基金项目(Foundation): 国家高技术研究发展计划项目(2007AA05Z208)

作者(Author): 胡斌,王文毅,李祁光,王凯,曹锋
HU Bin,WANG Wen-yi,LI Qi-guang,WANG Kai,Cao Feng(Xi'an Jiaotong University

参考文献(References)：

• [1]Wietstock P,Witte G.Studies in Multiphase Pumpingwith Screw Pumps[C].Bakken Lars E,1993:389-394.
• [2]Kazuyuki E S,Tetsuro T.Backflow in Twin-Screw-Type Multiphase Pump[C].Denver,Colorado,U.S.A:Society of Petroleum Engeeneering,1996.
• [3]Muller-Link D,Brandt J U,Reichwage M,et al.WetGas Compression-A Logical Step to Follow MultiphaseBoosting[C].Abu Dhabi,2002.
• [4]Cereijo AMM.Multiphase Twin-screw Pump ModelingFor The Oil And Gas Industry[D].Texas A&M Uni-versity,2003.
• [5]Klaus Rbiger,Thermo-and Fluid Dynamic Model of aMultiphase Pump,Operating at Very High Gas VolumeFraction[D].Nuremberg:University of Applied Sci-ences,2006.
• [6]Nakashima C Y,Oliveira S J,Caetano E F.HeatTransfer in a Twin-screw Multiphase Pump:ThermalModeling and One Application in The Petroleum In-dustry[J].Energy,2006,31(15):3415-3425.
• [7]Klaus Rabiger,Maksoud J,Ward G,et al.Theoreti-cal and Experimental Analysis of a Multiphase ScrewPump-Handling Gas Liquid Mixtures with Very HighGas Volume Fraction[J].Experimental Thermal andFluid Science,2008,32(8):1694-1701.
• [8]曹锋,束鹏程,邢子文.双螺杆多相混输泵技术及研究进展[J].石油机械,1999,27(3):49-52.
• [9]曹锋.双螺杆油气多相混输泵热力性能和动力性能特性研究[D].西安:西安交通大学,2001.
• [10]曹锋,邢子文,张小军,等.双螺杆混输泵压力建立过程的数值模拟及实验研究[J].西安交通大学学报,2001,35(5):497-501.
• [11]曹锋,邢子文,束鹏程.双螺杆多相流混输泵内部回流机理分析[J].西安石油学院学报(自然科学版),2001,16(2):46-49.
• [12]曹锋,陈芝久,束鹏程,等.螺杆转子三维力热变形分析[J].上海交通大学学报,2002,36(10):1453-1456.
• [13]Cao F,Peng X Y,Xing Z W,et al.ThermodynamicPerformance Simulation of a Twin-screw MultiphasePump[J].Proceedings of the Institution of MechanicalEngineers Part E,2001,215(E2):157-163.
• [14]徐建宁,屈文涛,赵宁.同步式双螺杆泵转子的温度场及热变形分析[J].油气储运,2006,25(8):33-35.
• [15]徐建宁,屈文涛,赵宁.双螺杆泵的热网络分析[J].石油机械,2006,34(6):35-37,42.
• [16]屈文涛,胥掌世,张弘,等.潜油双螺杆泵泄漏模型的理论研究[J].石油钻探技术,2007,35(6):76-78.
• [17]王炯,徐建宁,屈文涛,等.潜油双螺杆泵间隙的优化设计[J].石油机械,2008,36(8):32-35.
• [18]杨凯,黄润林.孟氏定律的局限及B-A-B齿形单头双螺杆泵[J].水泵技术,1996,4:11-13.
• [19]吴沛宜.变质量系统热力学及其应用[M].北京:高等教育出版社,1983:102-110.
• [20]沈维道,蒋智敏,童钧耕.工程热力学[M].北京:高等教育出版社,2000:177-181.
• [21]Egashira K,Shoda Shinji,Tochikawa T,et al.Back-flow in Twin Screw-Type Multiphase Pump[A].SPEAnnual Technical Conference and Exhibition[C],Col-orado,1996:221-230.