结构参数对大气喷射器性能影响的数值模拟研究Numerical Simulation of Influence of Structural Parameters on the Performance of Jet Ejector
戈锐;唐晶;郑金霞;高焕福;
GE Rui,TANG Jing,ZHENG Jin-xia,GAO Huan-fu(Jinan Railway Vehicles Equipment Co.Ltd.,of China CNR,Jinan 250000,China)
摘要(Abstract):
针对旅客列车真空集便系统中的核心部件之一——大气喷射器,借助CFD软件Fluent,研究了大气喷射器在使用过程中,喷嘴入口长度及锥角、喷嘴喉部长、喷嘴出口长度及直径、扩张管出入口长度及直径、扩张管喉长度对大气喷射器工作性能的影响,为此类大气喷射器结构参数的设计及优化提供了理论依据和指导方向。
Taking the air ejector-the key component of a coach vacuum sanitation as an object,the commercial software Fluent was used for the numerical simulation to analyze the effects of following important geometric parameters-length and taper angle of nozzle inlet-length of nozzle and outspread throat-length and diameter of nozzle exit and the inlet and outlet of the outspread on its performance.A reference is thus provided theoretically to the design of the air ejector.
关键词(KeyWords):
大气喷射器;数值模拟;工作性能;结构参数
air ejector;numerical simulation;performance;structural parameter
基金项目(Foundation):
作者(Authors):
戈锐;唐晶;郑金霞;高焕福;
GE Rui,TANG Jing,ZHENG Jin-xia,GAO Huan-fu(Jinan Railway Vehicles Equipment Co.Ltd.,of China CNR,Jinan 250000,China)
参考文献(References):
- [1]郑欣荣,张宪,赵章风,等.大气喷射器的节能应用研究[J].真空与低温,2005,11(1):50-54.
- [2]李念,徐惊雷.二维非对称喷管数值模拟与验证[J].航空动力学报,2004,19(6):802-805.
- [3]Sriveerakul T,Aphornratana S,Chunnanond K.Per-formance Prediction of Steam Ejector Using Computa-tional Fluid Dynamics[J].International Journal ofThermal Sciences,2007,46:812-822.
- [4]丁学俊,刘书勇,徐鑫.蒸汽喷射器的CFD数值模拟[J].流体机械,2011,39(4):21-25.
- [5]韩立夫,刘道启,高国东.基于FLUENT的大气喷射器工作性能数值仿真研究[J].内蒙古工业大学学报,2009,(4):297-300.
- [6]郑欣荣,张宪,赵章风,等.真空发生器器结构参数与性能参数关系研究[J].真空,2005,(9):13-16.
- [7]高飞,周敬宣.几何参数对空气射流器性能影响的数值仿真研究[J].真空,2011,(7):22-25.
- [8]陆宏圻.喷射技术理论及应用[M].武汉:武汉大学出版社,2004.
- [9]郭维强,蒲如平,韩秀杰,等.大气喷射器抽吸机理与性能的分析研究[J].真空,2003,(6):54-56.
- [10]Bartosiewicz Y,idoun Z,Desevaux P,et al.Numericaland experimental investigations on supersonic ejectors[J].International Journal of Heat and Fluid Flow,2005,26(1):56-70.
- [11]Desevaux P,Aeschbacher O.Numerical and experi-mental flow visualization of the mixing process insidean induced air ejector[J].Int.J.Turbo Jet Engines,2002,19(3):71-78.
- [12]张骞,王泽武,胡大鹏,等.多组分材料球形容器热力耦合压力分析与组分设计[J].压力容器,2012,29(3):1-5,58.
- [13]恽强龙,向清江,李红.几种异形喷嘴喷射的液气射流泵性能试验研究[J].流体机械,2011,39(11):1-4,16.
- [14]Desevaux P,Lanzetta F,Bailly Y.CFD modeling ofchock train inside a supersonic ejector:validation a-gainst flow visualization and pressure measurements inthe case of zero-secondary flow[C].ConferenceProc.,10th Int.Symp.low Visualization.Kyoto,Ja-pan,2002.