大型活塞压缩机异常振动的原因及对策Reason of the Abnormal Vibration of a Large-scale Piston Compressor and Its Solution
戴新西,贺运初,万智波
DAI Xin-xi,HE Yun-chu,WAN Zhi-bo(Hunan Jinxin Chemical Co.
摘要(Abstract)：
对一台六列M型活塞压缩机组的振动和噪声异常、一级和二级连杆大头瓦快速失效的原因进行了分析,并研究实施了在轴系上加装配重体,以适度增大轴系的转动惯量,调整轴系扭转振动固有频率的改造措施,有效消减了轴系的扭转振动,大幅度减小了机组的振动和噪声,提高了连杆大头瓦的使用寿命。
The vibration and abnormal noise of the compressor unit,and the accident of connecting rod bearing scuffing happened in a short time at the pin of the one-stage and two-stage crank in a 6M type piston compressor were analyzed.The reason is the torsional vibration of the crank.A method has been studied and executed to adjust the inherent frequency of torsional vibration of the crank.The method is assemble balance masses in the crank so that we can enhance the rotational inertia of the crank.The amplitude of its torsional vibration is reduced in effect.The vibration and abnormal noise of the unit has been diminished greatly too.And we extended the production life of the connecting rod bearing.
关键词(KeyWords)：
振动;噪声;改造;轴系;活塞压缩机
vibration;noise;retrofit;crank;piston compressor
基金项目(Foundation):
作者(Author):
戴新西,贺运初,万智波
DAI Xin-xi,HE Yun-chu,WAN Zhi-bo(Hunan Jinxin Chemical Co.
参考文献(References)：
- [1]美国石油学会.API618石油、化工和气体工业用往复压缩机(第四版)[M].1995,14.
- [2]郁永章.容积式压缩机技术手册[M].北京:机械工业出版社,2000,399-414.
- [3]吴慧斌,高世伦,王兴光,等.6110/125Z柴油机轴系扭振与减振研究[J].内燃机工程,2003,24(6):56-58.
- [4]徐少明,金光熹.空气压缩机实用技术[M].北京:机械工业出版社,1994,238.
- [5]苏恒,洪迈生,熊诗波.通过监测电机的定子电流实现齿轮的故障诊断[J].上海交通大学学报,2000,34(10):1413-1416.
- [6]李辉光,孙启国.曲轴扭转—纵向耦合振动分析[J].兰州交通大学学报(自然科学版),2004,23(1):107-110.
- [7]薛冬新,宋希庚.曲轴扭转振动导致的内燃机噪声[J].大连理工大学学报,1996,36(5):576-580.
- [8]李渤仲,宋天相,宋希庚.活塞式发动机轴系的耦合振动问题(一)———扭转振动引起的轴向振动[J].内燃机学报,1989,7(1):1-6.
- [9]宋希庚,薛冬新,王义.内燃机机械噪声与曲轴振动的关系[J].大连理工大学学报,1996,36(2):198-202.
- [10]郭大威,徐祯基,顾敦清,等.滑动轴承的失效分析[M].北京:机械工业出版社,1985,31-36.
- [11]贺运初,胡祖汉,戴新西,等.大型往复压缩机曲轴开裂的原因及改造[J].流体机械,2005,33(4):39-41.
- [12]王祺.内燃机轴系扭转振动[M].北京:国防工业出版社,1985,154-160.
- [13]濮良贵.机械零件(1982年修订本)[M].北京:高等教育出版社,1982,91-93.
- [14]张卫山.螺栓联接疲劳强度的提高[J].机械工艺师,1995,(9):20-21.
- [15]JB/T 8541—1997,往复活塞压缩机机械振动分级[S].