侯建军,胡洋,李斌,李树勋,吴翰林
HOU Jianjun,HU Yang,LI Bin,LI Shuxun,WU Hanlin

• 1:兰州理工大学
• 2:机械工业泵及特殊阀门工程研究中心
• 3:武汉第二船舶设计研究所

摘要(Abstract)：

针对可调式动态流量平衡阀缺乏系统的研究方法、精度难以满足要求等问题，对动态流量平衡阀进行系统的数学建模；运用Simulink进行仿真平台的搭建，对弹簧刚度系数、引压孔直径、各腔室体积、膜片外径等结构参数对其动态特性及调节精度的影响进行了深入研究。根据仿真结果，改进了现有动态流量平衡阀初步设计的结构参数；结合CFD仿真对流量控制精度进行模拟，得到了优化前后压差-流量曲线。试验证明，优化后的动态流量平衡阀的调节精度在±5%以内，且在30～300 kPa全压差范围内模拟结果和试验结果相对误差不超过6.5%，证明优化与动态特性模拟方法具有良好的精度，对此类产品设计具有重要意义。
For the problems such as lack of systematic research methods for adjustable dynamic flow balancing valves and thedifficulty in meeting the requirements of accuracy，the dynamic flow balancing valve was systematically mathematically modeled；Simulink was used to build a simulation platform，and the influences of structural parameters such as the spring stiffness coefficient，pressure hole diameter，the volume of each chamber and the outer diameter of the diaphragm on its dynamic characteristics and adjustment accuracy were deeply studied.According to the simulation results，the structural parameters of the preliminary design of the existing dynamic flow balancing valve were improved；the flow control accuracy was simulated in combination with CFD simulation，and the pressure difference-flow curve before and after optimization was obtained.The test results show that the adjustment accuracy of the optimized dynamic flow balancing valve is within±5%，and the relative error between the simulation results and the test results within the full pressure difference range of 30～300 kPa does not exceed 6.5%，which proves that the optimization and dynamic characteristics simulation methods have good accuracy and are of great significance to the design of such products.

关键词(KeyWords)： 流量平衡阀;动态特性;结构优化;控制精度
flow balance valve;dynamic characteristics;structure optimization;control accuracy

Abstract:

Keywords:

基金项目(Foundation): 国家自然科学基金项目(51569012)

作者(Author): 侯建军,胡洋,李斌,李树勋,吴翰林
HOU Jianjun,HU Yang,LI Bin,LI Shuxun,WU Hanlin

参考文献(References)：

• [1]LI S X，XU J J，FAN Y L，et al.Design optimization and experimental performance test of dynamic flow balance valve[J].Engineering Applications of Computational Fluid Mechanics，2020，14(1)：700-712.
• [2]李树勋，徐娟娟，范宜霖，等.动态流量平衡阀启闭过程中的线弹性不等值力[J].西南交通大学学报，2015，50(6)：1150-1155.LI S，XU J，FAN Y，et al.Linear elastic nonequivalence force for dynamic flow balance valve in opening and closing process[J].Journal of Southwest Jiaotong University，2015，50(6)：1150-1155.
• [3]LI B，GUO S，MAO X Y，et al.Characteristic analysis and experiment of a dynamic flow balance valve[J].Iop Conference，2017，100.
• [4]李树勋，范宜霖，叶琛，等.基于改进设计的平衡阀开孔型线优化及试验[J].浙江大学学报(工学版)，2015，49(5)：908-915.LI S X，FAN Y L，YE C，et al.Optimization and text for opening profile line of balance valve based on improved design[J].Journal of Zhejiang University(Engineering Science)，2015，49(5)：908-915.
• [5]杜大喜，胡庆斌，王军.超高温气体调节阀热流固耦合数值分析[J].流体机械，2021，49(11)：62-68.DU D X，HU Q B，WANG J.Numerical analysis of fluid-solid-heat coupling of ultra-high temperature gas regulating valve[J].Fluid Machinery，2021，49(11)：62-68.
• [6]廖伯权，何庆中，王佳，等.水滴迷宫式调节阀空化特性计算与结构改进[J].流体机械，2021，49(2)：30-36.LIAO B Q，HE Q Z，WANG J，et al.Numerical simulation and structural improvement of cavitation characteristics of water droplet labyrinth control valve[J].Fluid Machinery，2021，49(2)：30-36.
• [7]高志新，岳阳，李军业，等.调节阀阀体及阀座对流量特性的影响[J].流体机械，2021，49(10)：43-49.GAO Z X，YUE Y，LI J Y，et al.Effects of the valve body and the valve seat of regulating valves on the valve flow characteristics[J].Fluid Machinery，2021，49(10)：43-49.
• [8]马昌训，吴运新，滑广军，等.基于AMESim的叠加式溢流阀故障仿真研究[J].流体机械，2011，39(2)：25-29.MA C X，WU Y X，HUA G J，et al.Performance simulation of stack relief valve based on AMESim[J].Fluid Machinery，2011，39(2)：25-29.
• [9]SAHA B K，CHATTOPADHYAY H，MANDAL P B，et al.Dynamic simulation of a pressure regulating and shut-off valve[J].Computers & Fluids，2014，101：233-240.
• [10]HAN M，LIU Y，TAN H，et al.Mathematical Modelling and multi-objective optimization design of a large flow water hydraulic proportional cartridge valve[C]//Asme/bath Symposium on Fluid Power & Motion Control.2017：V001T01A021.
• [11]LIU J，XIE H，HU L，et al.Realization of direct flow control with load pressure compensation on a load control valve applied in overrunning load hydraulic systems[J].Flow Measurement & Instrumentation，2016：S0955598616300814.
• [12]HUANG G，GE D.Design and simulation of the key parameters of speed control valve based on MATLAB[J].IOP Conference Series：Materials Science and Engineering，2019，472(1)：012026.
• [13]彭育辉，吴智洲，黄育鹏，等.基于试验设计方法的双级CNG减压阀结构改进[J].中国机械工程，2019，30(20)：2512-2519.PENG Y H，WU Z Z，HUANG Y P，et al.Structure improvement on two-stage CNG pressure regulators based on method of DOE[J].China Mechanical Engineering，2019，30(20)：2512-2519.
• [14]刘君，董海波，徐春光.减压阀动态特性的数值模拟及故障分析[J].振动工程学报，2015，28(6)：140-147.LIU J，DONG H B，XU C G.Numerical simulation of dynamic properties of pressure relief valve and fault diagnosis[J].Journal of Vibration Engineering，2015，28(6)：990-997.
• [15]赵建军，朱忠祥，宋正河，等.重型拖拉机电液提升器多路换向阀仿真与试验[J].农业机械学报，2014，45(S1)：1-9.ZHAO J，ZHU Z，SONG Z，et al.Simulation and experiment on multi-directional valve of heavy tractor electro-hydraulic hitch[J].Transactions of the Chinese Society for Agricultural Machinery，2014，45(S1)：1-9.
• [16]LIU P，LIU Y H，WEI X X，et al.Performance analysis and optimal design based on dynamic characteristics for pressure compensated subsea all-electric valve actuator[J].Ocean Engineering，2019，191：106568-106568.