射流位置对喷管喉道倾斜矢量控制方案的影响分析Effects of Injector Location for the Fluidic Throat Skewing Concept on Nozzle Flow Field
张相毅,王如根,徐学邈,周敏
ZHANG Xiang-yi,WANG Ru-gen,XU Xue-miao,ZHOU Min(The Engineering College
摘要(Abstract)：
利用RNG k-ε湍流模型,采用局部网格加密技术,求解三维N-S方程对某型二元喷管喉道倾斜矢量控制时的全流场进行了数值模拟。研究表明在小扩张比、短扩散段喷管上,采用喉道倾斜矢量控制方案主流可以实现亚音速偏转。采用三维曲面生成法分析了调整喉部射流位置和扩张段射流位置对喷管流场的影响,计算表明喉部射流位置越接近喉部,扩张段射流位置越靠近喷口,产生的推力矢量越大。
Different condition 3D viscosity steady nozzle flow fields at different throat injector location and flap injector location are calculated,which the finite volume method is used to solve 3D Reynolds average N-S equation by RNG k-ε turbulence model as well as technology of compact local grids.The results indicate that the subsonic turning is best achieved with small nozzle expansion area ratios and short nozzle flap lengths;the injector location has much effect on the vectoring angle by building 3D surface model;locating the throat injector toward the throat and the flap injector toward the exit of the nozzle can increase thrust vectoring angle.
关键词(KeyWords)：
喉道倾斜;射流位置;推力矢量;喷管流场
fluidic throat skewing;injector location;thrust Vectoring;nozzle flow field
基金项目(Foundation):
作者(Author):
张相毅,王如根,徐学邈,周敏
ZHANG Xiang-yi,WANG Ru-gen,XU Xue-miao,ZHOU Min(The Engineering College
参考文献(References)：
- [1]Kowal HJ.Advances in thrust vectoring and the appli-cation of low-control technology[J].Canadian aeronau-tics and space journal,2002,48(1):145-151.
- [2]Waithe K A,Deere K A.Experimental and computa-tional investigation of multiple injection ports in a con-vergent-divergent nozzle for fluidic thrust vectoring[R].2003,2003-3802,2003:45-46.
- [3]Miller D N,Yagle P J,Hamstra J W.Fluidic throatskewing for thrust vectoring in fixed geometry nozzles[R].AIAA99-0365,1999.
- [4]罗静,王强,额日其太.两种流体控制方案矢量喷管内流场计算及分析[J].北京航空航天大学学报,2004,30(7):597-601.
- [5]马会民.矢量喷管非定常流场计算与动态数学模型研究[D].西安:西北工业大学,2002.