张琴,张慢来,周志宏,廖锐全
ZHANG Qin,ZHANG Man-lai,ZHOU Zhi-hong,LIAO Rui-quan

• 1:长江大学

摘要(Abstract)：

应用计算流体动力学方法(CFD)对往复式压缩机进气阀的工作过程进行内流场的瞬态数值模拟,确定了膨胀、进气过程中温度场、压力场、速度场等物理场的分布,研究了曲轴转速、弹簧刚度对进气阀工作特性的影响。计算结果表明:进气阀工作过程的仿真必须对膨胀和进气过程进行连续动态模拟以确定工作特性;对于一定结构的进气阀,当弹簧刚度由455N/m增大到8000N/m时,压缩机进气量从11.3×10-3m3降至8.8×10-3m3,因为泄漏,在刚度为2000N/m时具有最大实际吸入量11.2×10-3m3;当曲轴转速由300r/min提高到2000r/min时,实际吸入量由11.6×10-3m3降至8.6×10-3m3;从避免阀片颤振、降低瞬时流量波动、限制关闭滞后角和泄漏量以及提高实际吸入气量等方面综合考虑,较合理的弹簧刚度在2000N/m左右,大于原设计的455N/m。通过对进气阀的数值模拟,为优化弹簧刚度、进一步分析变转速下气阀的工作性能提供了依据。
In order to study the influences of crank speed and spring stiffness on the performance of reciprocating compressor suction valve,the fluid-thermal-structure multi-physics coupling simulation based on Computational Fluid Dynamics method is employed to determine the temperature、pressure、velocity fields during expansion and suction.The simulation results show that the air inflow is form 11.3×10-3m3 to 8.8×10-3m3 when the spring stiffness raises from 455N/m to 8000N/m for a special compressor,but the maximal net import air volume in the intake process is 11.2×10-3m3 at a stiffness of 2000N/m for the leakage.Besides,the net air inflow drops form 11.6×10-3m3to 8.6×10-3m3 when the crankshaft speed raised from 300r/min to 2000r/min.Therefore,the performance of suction valve can be improved by adjusting the spring stiffness and the crankshaft speed to avoid valve flutter,reduce the transient flux fluctuation,limit the delay-closing and leakage of suction valve,and increase the net air flow.The preferable spring stiffness and crankshaft speed are about 2000N/m,which is larger than the original stiffness 455N/m.Through the multi-physics coupling simulation,the valid reference is provided for optimizing spring stiffness and investigating the inlet valve at variable speeds.

关键词(KeyWords)： 往复式压缩机;计算流体动力学;流-热-固;曲轴转速;弹簧刚度
reciprocating compressor;computational fluid dynamics;fluid-thermal-structure;crankshaft speed;spring stiffness

Abstract:

Keywords:

基金项目(Foundation): 国家自然科学基金项目(60873021)

作者(Author): 张琴,张慢来,周志宏,廖锐全
ZHANG Qin,ZHANG Man-lai,ZHOU Zhi-hong,LIAO Rui-quan

参考文献(References)：

• [1]林梅,吴业正,吴丹青.压缩机环状阀原理[M].北京:化学工业出版社,1982.
• [2]唐翠华,张秀娟,袁本中.气阀弹簧力对压力系数的影响及控制[J].压缩机技术,2010,2(4):30-32.
• [3]刘德基,张慢来,张琴,等.往复式压缩机进气阀运动规律的理论研究[J].石油机械,2013,41(3):80-83.
• [4]陶文铨.数值传热学[M].西安:西安交通大学出版社,1988.
• [5]金忠青.N-S方程的数值解和紊流模型[M].南京:河海大学出版社,1989.
• [6]Roland Aigner,et al.Valve Dynamics and Internal Waves in a Reciprocating Compressor[C].4th Conference of the EFRC,2005.
• [7]张兆顺,崔桂香,许春晓.湍流理论与模拟[M].北京:清华大学出版社,2005.
• [8]冯进,张慢来,黄天成.安全阀水动力特性的CFD模拟和研究[J].核动力工程,2007,28(5):31-34.
• [9]刘金武,龚金科,钟志华.内燃机缸内复杂空间三维动态网格生成技术[J].计算机辅助设计与图形学学报,2006,18(4):487-492.
• [10]张慢来,冯进,黄天成.膜片稳压溢流阀的瞬态数值模拟方法研究[J].阀门,2007,(2):23-25.
• [11]张慢来,廖锐全,冯进,等.往复泵吸入特性的流体力学数值模拟[J].农业工程学报,2010,26(增2):254-259.
• [12]高红,傅新,杨华勇.锥阀阀口气穴流场的数值模拟与试验研究[J].机械工程学报,2002,38(8):27-30.
• [13]郑淑娟,权龙,陈青.阀芯运动过程液压锥阀流场的CFD计算与分析[J].农业机械学报,2007,38(1):168-172.
• [14]郑淑娟,权龙.基于CFD的液压锥阀阀芯启闭过程的液动力分析[J].机电产品开发与创新,2007,20(2):81-82.
• [15]冯卫民,肖光宇,宋立.偏心球阀流场的数值模拟及性能预测[J].排灌机械,2008,26(4):8-13.
• [16]高希彦,王燕,方武.数值仿真在泵阀参数优化中的应用[J].排灌机械工程学报,2010,28(1):63-68.
• [17]余永增,李锦龙,尹金明,等.2HA/2往复式压缩机气阀及磨损类故障分析与改进[J].流体机械,2011,39(7):62-66.
• [18]叶挺,黄秀玲,刘全校.国内外纸塑复合食品包装材料安全法规的现状[J].包装与食品机械,2012,30(1):53-56,63.
• [19]王中振,郭文涛,刘博想,等.考虑阀腔影响的气流脉动模拟改进[J].流体机械,2010,38(7):20-25.
• [20]孙斌,许安俊.高压止回阀断裂失效分析[J].流体机械,2012,40(1):67-72.