流体机械

2011, v.39;No.472(10) 10-15+24

[打印本页] [关闭]
本期目录(Current Issue) | 过刊浏览(Past Issue) | 高级检索(Advanced Search)

双螺杆多相混输泵压力分布的数值模拟
Numerical Simulation on Pressure Distribution of Twin-screw Multiphase Pump

胡斌;王文毅;李祁光;王凯;曹锋;
HU Bin,WANG Wen-yi,LI Qi-guang,WANG Kai,Cao Feng(Xi'an Jiaotong University,Xi'an 710049,China)

摘要(Abstract):

对不同运行工况和几何参数下双螺杆多相混输泵的压力分布进行了模拟计算,并和已发表文献中的试验数据进行了分析比较,验证了所建立的数学模型。并得出随入口压力增高,压差增大,转子转速升高,泵间隙减小双螺杆多相混输泵内压力变化曲线曲率增大;低入口含气率下随入口含气率升高压力变化曲线曲率增大,高入口含气率情况下则相反;相同螺距下转子长度越长压力变化曲线越平坦。
The pressure distribution of twin-screw multiphase pumps is simulated numerically under different working conditions and geometrical parameters.By comparing the simulation results and the experimental data in literatures which have already been published,the model to simulate the working process is verified under different working conditions.The curvature of pressure distribution curve in the twin-screw pump enlarged as the suction pressure and pressure difference increased.The increase of rotate speed and the decrease of clearance size also made the pressure distribution curve steeper.On low gas volume fraction conditions the curvature of pressure distribution curve increased as the gas volume fraction enhanced,while the conclusion is opposite under high gas volume fraction conditions.At the same screw length,pressure distribution along the axial direction of the rotor became more and more plainness as the rotor length increased.

关键词(KeyWords): 双螺杆多相混输泵;压力分布;数学模型
twin-screw multiphase pump;pressure distribution;mathematical model

Abstract:

Keywords:

基金项目(Foundation): 国家高技术研究发展计划项目(2007AA05Z208)

作者(Author): 胡斌;王文毅;李祁光;王凯;曹锋;
HU Bin,WANG Wen-yi,LI Qi-guang,WANG Kai,Cao Feng(Xi'an Jiaotong University,Xi'an 710049,China)

Email:

DOI:

参考文献(References):

扩展功能
本文信息
服务与反馈
本文关键词相关文章
本文作者相关文章
中国知网
分享