关键高温油泵机械密封及辅助系统改造Transformation of Mechanical Seals for Key High Temperature Oil Pumps and Their Auxiliary System
王振业;姜世庆;
WANG Zhen-ye;JIANG Shi-qing;Qingdao Petrochemical Company Ltd.;
摘要(Abstract):
焦化进口辐射进料泵、常减压减底泵、催化油浆泵等是炼油厂关键高温油泵,普通单端面波纹管机械密封及辅助系统存在易泄漏、密封使用寿命短、易导致火灾、配件费用高等问题。通过原因分析对比,根据实际情况将原机械密封改造为串级集装式双波纹管机械密封,辅助系统改造为PLAN53B+32,改造后效果显著,机械密封寿命大大延长,节约大量维修成本,消除了机械密封泄漏火灾隐患。
The imported coking radiation feed pump,decompression tower bottom pump of atmospheric and vacuum distillation unit,catalytic oil slurry pump,etc. are the key high temperature oil pumps in oil refineries. The ordinary single end face bellows seal and its auxiliary system have the problems of ease to leak,short service life,ease to cause serious consequence such as fire,and high cost of fittings,etc. Through cause analysis and comparison,the original mechanical seal was transformed into a cascadetype container double-bellows mechanical seal according to the actual situation,and its auxiliary system was transformed into PLAN53B+32.The effect was remarkable after transformation. The mechanical seal life was greatly extended,a large amount of accessories cost was saved,and the fire hazard due to mechanical seal leakage was eliminated.
关键词(KeyWords):
高温油泵;串级集装式双波纹管机械密封;PLAN53B系统
high temperature oil pump;cascade container type double bellows mechanical seal;PLAN53B system
基金项目(Foundation):
作者(Authors):
王振业;姜世庆;
WANG Zhen-ye;JIANG Shi-qing;Qingdao Petrochemical Company Ltd.;
参考文献(References):
- [1]API 682—2004,泵用密封系统(适于离心泵和转子泵)[S].
- [2]马凯,蔡仁良,励行根.反应堆压力容器用C形密封环的变形特性研究[J].压力容器,2016,33(1):14-19.
- [3]李伟,何毅斌,王彦伟,等.新型线香机设计及间隙密封流场仿真分析[J].机电工程,2016,33(6):713-717.
- [4]陈忠,张振东,吴帅.电动燃油泵流道数值仿真及结构改进研究[J].机电工程,2016,33(68):950-954.
- [5]马豪,杨传民,郑毅.利乐复合材料与PE密封条纵封热封性能规律的研究[J].包装与食品机械,2017,35(2):26-30.
- [6]林建华,林晓平,陈杰峰,等.高温导热油旋转接头失效案例及技术分析[J].包装与食品机械,2018,36(3):69-72.
- [7]陈沙古,卞如冈,黄进浩.深海高压压力筒抗剪环式密封结构受力分析[J].压力容器,2016,33(5):15-19.
- 高温油泵
- 串级集装式双波纹管机械密封
- PLAN53B系统
high temperature oil pump - cascade container type double bellows mechanical seal
- PLAN53B system