连续重整往复压缩机故障原因分析与改造措施Fault Reason Analysis and Reform Countermeasures of Continuous reforming Reciprocating Compressor
莫才颂,林荣雄
MO Cai-song,LIN Rong-xiong
摘要(Abstract)：
连续重整装置4M20—181/10—BX型往复式解吸气压缩机是炼油厂关键设备之一,在运行过程中存在活塞环、支承环磨损快等故障,停机检修频率很高。针对该机组故障原因进行分析,得出介质带液为主要原因,对活塞易损件材质进行改进,并对一级入口缓冲罐进行重新设计改造,应用效果明显。
Continuous reforming unit 4 M20—181 /10—BX type reciprocating compressor is an oil refinery in solution is one of key equipment,in the operation process in piston,supporting rim wear fast failure,stopping maintenance frequency is very high.According to the unit fault causes and analysis for the main reason with liquid medium,on the piston parts,improve material,and the level of entrance buffer tank to design and transformation,the application effect is obvious.
关键词(KeyWords)：
往复压缩机;活塞环;故障;改造
reciprocating compressor;piston ring;fault;transformation
基金项目(Foundation): 广东高校石化过程装备故障诊断与信息化控制工程中心重点实验室项目(2011A060901023)
作者(Author):
莫才颂,林荣雄
MO Cai-song,LIN Rong-xiong
参考文献(References)：
- [1]刘慧春.往复式活塞压缩机故障分析与处理[J].石油化工设备技术,2010,(3):27-30.
- [2]李传奇.BTD2往复压缩机部分无油润滑改进及效果分析[J].矿山机械,2008,(8):58-61.
- [3]梁彬.活塞式无油润滑压缩机钩形填料密封环机加工工艺的改进[J].润滑与密封,2011,(4):122-124.
- [4]余永增.2HA/2往复式压缩机气阀及磨损类故障分析与改进[J].流体机械,2011,39(7):55-59.
- [5]杨玉强,贺小华,杨建永.基于ANSYS的双管板换热器管板厚度设计探讨[J].压力容器,2010,27(10):34-39.
- [6]王宪,廖俊必.腐蚀管道的剩余强度评定及ANSYS二次开发[J].压力容器,2012,29(1):31-35.
- [7]莫才颂.加氢裂化装置往复压缩机填料密封故障分析与改造[J].润滑与密封,2012,(5):99-102.
- [8]朱圣东.无油润滑压缩机[M].北京:机械工业出版社,2000,12.