王祺武,李志鹏,李捷
WANG Qiwu,LI Zhipeng,LI Jie

• 1:长沙理工大学能源与动力工程学院
• 2:湖南省特大口径电站阀门工程技术研究中心

摘要(Abstract)：

针对硬密封阀门因密封面磨损而导致其密封失效的问题,采用Archard磨损模型,并借助ANSYS有限元软件模拟密封面的接触,以密封副初始挤压量为0.08 mm的硬密封为例,利用离散化的计算方法逐步对0.02,0.04,0.06 mm磨损深度下的密封面接触压力进行仿真求解,计算出不同磨损深度下密封面的正压力及穿透量并进行分析,推测其磨损趋势并得到密封面的磨损寿命,计算得到当密封失效时即密封副不再有挤压量时,阀门的使用寿命可达5 854次启闭,并发现硬密封的磨损可大致分为3个阶段进行。通过此类方法预测阀门使用寿命,可为硬密封阀门的结构设计及相关密封磨损的寿命研究提供一定的基础和参考。
For the problem of hard seal valve’s sealing failure due to the wear of the sealing surface，the Archard wear model was used，and the contact of the sealing surface was simulated with the help of ANSYS finite element software.Taking the O-shaped hard seal with the initial extrusion amount of 0.08 mm as an example，the contact pressure of the sealing surface under the wear depth of 0.02，0.04 and 0.06 mm was simulated and solved step by step by using the discrete calculation method to calculate the positive pressure and penetration of the sealing surface under different wear depth，speculate the wear trend and obtain wear life of the sealing surface.Through calculation，it is concluded that the service life of the valve can reach 5 854 times of opening and closing when the seal fails，that is，when the seal pair no longer has extrusion，and it is found that the wear of the hard seal can be roughly divided into three stages.Predicting the service life of the valve by this method can provide a certain basis and reference for the structural design of the hard seal valve and the life study related to seal wear.

关键词(KeyWords)： 硬密封;Archard模型;仿真分析;磨损寿命
hard seal;Archard mode;simulation analysis;wear life

Abstract:

Keywords:

基金项目(Foundation): 湖南省重点研发项目（2017KG2182）;; 湖南省研究生科研创新项目（CX20190690）

作者(Author): 王祺武,李志鹏,李捷
WANG Qiwu,LI Zhipeng,LI Jie

参考文献(References)：

• [1]SCHMIDT T，ANDRé M，POLL G.A transient2D-finite-element approach for the simulation of mixed lubrication effects of reciprocating hydraulic rod seals[J].Tribology International，2010，43(10)：1775-1785.
• [2]冯占荣，魏莙，郭正华，等.高压硬密封固定球球阀密封性分析与优化[J].南昌航空大学学报(自然科学版)，2017，31(1)：61-67.FENG Z R，WEI J，GUO Z H，et al.Sealing performance analysis and optimization of high-pressure hard sealing fixed ball valve[J].Journal of Nanchang Hangkong University，2017，31(1)：61-67.
• [3]偶国富，肖定浩，易玉微，等.硬密封球阀主密封副接触的特性分析[J].浙江理工大学学报，2015，33(9)：669-674.OU G F，XIAO D H，YI Y W，et al.Characteristic analysis of primary seal and auxiliary contact the main seal in metal to metal sealed[J].Journal of Zhejiang Sci-Tech University，2015，33(9)：669-674.
• [4]LI X，PENG G L，LI Z.Prediction of seal wear with thermal-structural coupled finite element method[J].Finite Elements in Analysis and Design，2014，83：10-21.
• [5]常凯.基于ANSYS的O形密封圈磨损仿真方法研究[J].液压与气动，2018(2)：98-103.CHANG K.Wear simulation method of o-ring based on ANSYS[J].Chinese Hydraulics & Pneumatics，2018(2)：98-103.
• [6]华剑，胡磊，李美求，等.金属陶瓷硬密封双偏心半球阀密封性能分析[J].机械设计与制造，2017(2)：243-245.HUA J，HU L，LI M Q，et al.Seal performance analysis for cermet hard seal double eccentric semi-ball valve[J].Machinery Design & Manufacture，2017(2)：243-245.
• [7]孔翔，陈力智，邱晓来，等.大口径金属硬密封球阀泄漏分析及解决方案[J].机械设计与制造，2019(6)：204-207.KONG X，CHEN L Z，QIU X L，et al.Leakage analysis and treatment of large-diameter metal-seated ball valve[J].Machinery Design & Manufacture，2019(6)：204-207.
• [8]张立强，张云杰，李梦科.基于均匀试验设计的硬密封球阀密封面间隙优化[J].液压与气动，2020(4)：160-163.ZHANG L Q，ZHANG Y J，LI M K.Optimum design of seal surface gap of hard sealed ball valve based on uniform test design[J].Chinese Hydraulics & Pneumatics，2020(4)：160-163.
• [9]ARCHARD J F.Contact and rubbing of flat surfaces[J].Journal of Applied Physics，1953，24(8)：981-988.
• [10]张天霄.液压元件的可靠性设计和可靠性灵敏度分析[D].吉林：吉林大学，2014.ZHANG T X.The Reliability design and sensitivity analysis of hydraulic components[D].Jilin：Jilin University.
• [11]陈果，宋鹏云.用于幂律流体螺旋槽液膜机械密封性能的解析法[J].排灌机械工程学报，2019，37(2)：148-153.CHEN G，SONG P Y.Approximate analytic analysis on performance of spiral groove liquid film mechanical seal being applied to seal power-law fluid[J].Journal of Drainage and Irrigation Machinery Engin，2019，37(2)：148-153.
• [12]王佳星，李双喜，马文杰，等.轴承腔环瓣式浮环密封摩擦热分析[J].机电工程，2020，37(9)：1032-1038.WANG J X，LI S X，MA W J，et al.Frictional heat analysis of bearing cavity ring shaped floating ring seal[J].Journal of Mechanical & Electrical Engineering，2020，37(9)：1032-1038.
• [13]XIA Y Q，HU J H，ZHOU F，et al.Friction and wear behavior of plasma nitrided 1Cr18Ni9Ti austenitic stainless steel under lubrication condition[J].Materials Science and Engineering A，2005，402(1-2)：135-141.
• [14]徐向阳，徐滨士，刘文今，等.1Cr18Ni9Ti不锈钢在滑移区的微动磨损行为[J].摩擦学学报，2002(6)：444-448.XU X Y，XU B S，LIU W J，et al.Fretting wear behavior of 1Cr18Ni9Ti stainless steel in sliding regime[J].Tribology，2002(6)：444-448.