横管蒸发纵管冷凝式热管充液量、倾角对传热的影响Influence of Inclination and Filling Ratio on the Thermal Characteristic of the Horizontal Tube Evaporating and Vertical Tube Condensing Heat Pipe
贾鹏飞,金苏敏
JIA Peng-fei,JIN Su-min
摘要(Abstract):
通过搭建试验台对横管蒸发纵管冷凝式热管进行试验研究,分析该型热管在不同充液量和不同的倾角的情况下传热性能的变化。经分析发现,充液量和倾角两个因素都对该型热管的传热性能有很大影响。当倾角变化时,其热阻随倾角增加而不断增加且存在临界角。倾角在到达临界角之前热阻上升缓慢,倾角大于临界角后其热阻急剧增大。当充液量变化时,随充液量增大热管热阻先减小后增大;且在60%充液量时热阻最小,传热性能最佳。
The experimental investigations were carried out to study the thermal characteristics of the horizontal tube evaporating and vertical tube condensing heat pipe charged with different filling ratios and angles of inclination. Through analysis of data,the filling ratios and inclination angles are found to the main factors which influence heat transfer performance sharply. When inclination angles changing,thermal resistance increased on the increase of inclination angles,and there are a critical angle. Thermal resistance rises slowly before reaching the critical angle; thermal resistance rises sharply after reaching the critical angle. When filling ratios changing,the heat pipe thermal resistance decreases and then increases on the increase of filling ratios. When filling ratio is 60%,the minimum thermal resistance appear and heat pipe has the best heat transfer performance.
关键词(KeyWords):
热管;充液量;倾角;热阻
heat pipe;filling ratio;angle of inclination;heat transfer performance
基金项目(Foundation):
作者(Author):
贾鹏飞,金苏敏
JIA Peng-fei,JIN Su-min
参考文献(References):
- [1]宗朝晖.现代电力电子的冷却技术[J].变流技术与电力牵引,2007(4):6-12.
- [2]李佳,金苏敏.板翅式热管散热器充液率、倾角对冷板温度场的影响[J].流体机械,2015,43(11):82-86.
- [3]王礼建,刘桂云.两相闭式热虹吸管传热性能的研究[J].长沙水电师院学报(自然科学版),1987,2(2):103-110.
- [4]史维秀,潘立生.脉动热管理论及技术进展[J].流体机械,2013,41(7):72-77.
- [5]Tang Y,Xiang J H,Wan Z P,et al.A novel miniaturized loop heat pipe[J].Applied Thermal Engineering,2010,30(10):1152-1158.
- [6]史启辉.两相闭式热虹吸管强化传热实验研究[D].郑州:郑州大学,2007.
- [7]Moradgholi M,Nowee S M,Abrishamchi I.Application of heat pipe in an experimental investigation on a novel photovoltaic/thermal(PV/T)system[J].Solar Energy,2014,107:82-88.
- [8]张亚平,冯全科,余小玲.影响热虹吸管运行性能的参数分析[J].低温与超导,2008,36(9):63-65.
- [9]Wei J,Hijikata K,Inoue T.Fin efficiency enhancement using a gravity assisted planar heat pipe[J].International Journal of Heat and Mass Transfer,1997,40(5):1045-1051.
- [10]罗爱华,金鹰,岳良,等.牵引整流器热管式空气冷却器散热性能实验研究[J].制冷学报,2013,34(5):90-94.
- [11]吴和英.热虹吸管换热热阻分析[J].中国科技信息,2006(11):322-327.
- [12]赵展,金苏敏.基于管排组合的分离式热管换热器的数值模拟[J].流体机械,2011,39(7):83-86.
- [13]耿李姗,练剑青.沸腾传热管表面换热系数测试方法研究[J].四川建筑科学研究,2014,40(2):334-337.
- [14]胡张保,张志伟,李改莲,等.采用微通道蒸发器的分离式热管空调传热性能的试验研究[J].流体机械,2015,43(11):68-71.
- [15]韩同行,左超平,秦加明,等.蒸汽发生器传热管流弹失稳计算[J]压力容器,2014,31(11):39-44.
- [16][日]尾花英朗.换热器设计手册(上册)[M].忠权,译.北京:石油工业出版社,1981:342-390.
- [17]庄骏,张红.热管技术及其工程应用[M].北京:化学工业出版社,2000:64-82.