日本压缩机的发展和技术开发工作
Akemi;Futakawa;费安顺;
摘要(Abstract):
这篇论文是想对日本制冷压缩机和气体压缩机的最新研究和发展进行一次回顾。这篇回顾论文是以机械工程领域的学报、论文集和杂志为资料来源的。大多数日本压缩机公司都进行了长时间的努力,应用先进技术以改进制冷压缩机和气体压缩机及其组件。这种努力的目的,是要在系统上能得到比现有压缩机在能量消耗上能有大幅度的下降。通过运转性能和可靠性的提高以显著降低能量消耗,通过减少部件数量以得到较高生产率、简化维修和操作,这些提高效率的方法是很有潜力的。这个趋向促进了诸如滚动活赛式回转压缩机、单螺杆压缩机和涡卷式压缩机等回转式压缩机的发展。
关键词(KeyWords):
基金项目(Foundation):
作者(Authors):
Akemi;Futakawa;费安顺;
参考文献(References):
- [1] K. Suefuji and S. Nakayama, “Practical Me-thod for Analysis and Estimation of Recipo-cating Hermetic Compressor Performance”, Proceedings of the 1980 Purdue Comnrpessor Technology Conference, July 23-25, 1980 pp. 15-23.
- [2] H. Kawai, H. Nishihara, K. Hamada, and Nakaoka, "The Development of High Effiiency Compressors by Reducing Suction GTemperature", Proceedings of the 1982 Purd Compressor Technology Conference, July 21-23, 1982, pp. 222-228.
- [3] K. Imaichi, N. Ishii, S. Saito, and K. Im-asu, "Leakage Effects on Indicator Diagran at Stopping of Reciprocating Compressors",Proceedings of the 1978 Purdue CompressorConference, July 19-21, 1978, pp. 283-288.
- [4] T. Ohinata and T. Hirahara, "HJ-E Series of High Efficiency Compressors for Large Air Conditioning”, Mitsubishi Denki Giho, Vol56, № 8, 1982, pp. 625-628.
- [5] A. Hara, K. Tojo, T. Mori, and M. Oide,“New Series of Semi-Hermetic Compressor for Low Temperature”, Mitsubishi Denki Giho, Vol. 57, № 5, 1983, pp. 335-339.
- [6] T. Itami, K. Okoma, and K. Misawa, “An Experimental Study of Frequency-Controlled Compressors”, Proceedings of the 1982 Purdue Compressor Technology Conference, July 21-23, 1982, pp. 297-304.
- [7] T. Sano, S. Orita, and Y. Tsuchiya, "Multi-Indoor-Unit Room Air Conditioner Incor-porating Variable-Capacity Control Inverter", Toshiba Review, Vol. 38, № 13, 1983, pp.1199-1202.
- [8] S. Okamoto, I. Tateishi, K. Hiyoshi, et al,“Inverter-Controlled Air Conditioner”, Sharp Technical Report, № 27, Sept., 1983, PP.141-146.
- [9] K. Imasu, M. Yamane, S. Muramatsu, and H. Fujieda,“An Energy Saving Residential Cooling System with a Two Step Speed Com-pressor", Proceedings of the 1980 Purdue Compressor Technology Conference, July 23-25, 1980, pp. 207-214.
- [10] M. Morimoto, "Single-Phase, Two-Speed Co-mpressors”, Proceedings of the 1982 Purd Compressor Technology Conference, July 21-23, 1982, pp. 292-296.
- [11] S. Saito, S. Maeda, N. Okubo, and T. Uets-uji,“Noise Reduction of Hermetic Compressor by Improvement on Its Shell Shape”, Procee-dings of the 1980 Purdue Compressor Techno-logy Conference, July 23-25, 1980, pp. 228-234.
- [12] K. Tojo, S. Saegusa, S. Machida, et al“Noise Reduction of Refrigeration Compressor Proceeaings of the 1980 Purdue ComnressorTecnnology Conference, July 23-25, 1980,pp. 235-242.
- [13] T. Matsuzaka, T. Hayashi, and H. Shinto“Analysis of Cavity Resonance in 5 HP Her-metic Reciprocating Compressor with EllipticalShell”, Proceedings of the 1980 Purdue Com-pressor Technology Conference, July 23-251980, pp. 338-343.
- [14] K. Imaichi, N. Ishii, K. Imasu, et al.,“Hi-gh Frequency Vibratory Components Causedby Elastic Vibrations of the Crank Shaft inRefrigerating Compressors”, Proceedings ofthe 1980 Purdue Compressor Technology Con-ference, July 23-25, 1980, pp. 90-96.
- [15] A. Futakawa, N. Matsumura, and K. Tsuch-iya,“Transient Stress Produced in InternalSuspension Springs of Hermetic RefrigerationCompressor during Start and Stop Operations”,ASME Paper 79-DET-47, 1979, and Procee-dings of the 1980 Purdue Compressor Tech-aology Conference, July 23-25, 1980, pp79-89.
- [16] A. Futakawa, K. Namura, and H. Furukawa,"Dynamic Stress of Refrigeration CompressorReed Valve with Oval Shape", Proceedingsof the 1978 Purdue Compressor TechnologyConference, July 19-21, 1978, pp. 187-194.
- [17] A. Futakawa, K. Namura, and H. Emoto,"Deformation and Stress of Refrigeration Co-mpressor Flexible Ring Valve", Proceedingsof the 1978 Purdue Compressor TechnologyConference, July 19-21, 1978, pp. 195-202.
- [18] A. Futakawa and K. Namura, "A Fundamen-tal Study on Valve Impact Stresses in Refri-geration Compressor", Proceedings of the 1980Purdue Compressor Technology Conference,July 23-25, 1980, pp. 277-285.
- [19] A. Futakawa and K. Namura, "Impact Fati-gue Behavior of Flapper Valve Steel", Proc-cedings of the 1982 Purdue Compressor Te-chnology Conference, July 21-23, 1982, pp. 119-126.
- [20] M. Akatsuchi, M. Sugiyama, and S. Nagato-mo,“High Efficiency Rotary Compressor for Room Air Conditioner”, Toshiba Review, Vol. 38, №2, 1983, pp. 96-99.
- [21] Z. Oishi and H. Yamada,“RL(Z) Type Ro-tary Compressor for Low Temperature”, Mit-subishi Denki Giho, Vol. 57, №5, 1982, pp. 343-345.
- [22] T. Yanagisawa,“A Study on Leakage Loss of Rotary Compressor of Rolling Piston Type (Radial Clearance Leakage of Rolling Pis-ton)”, Transactions of the JSME (Series B), Vol. 48, № 426, 1982, pp. 265-274.
- [23] T. Yanagisawa, T. Shimizu, and M. Naka-mura,“A Study on Leakage Loss of Rotary Compressor of Rolling Piston Type (Phase Clearance Leakage of Rolling Piston”, Tran-sactions of the JSME (Series B), Vol. 48, № 431, 1982, pp. 1256-1265.
- [24] T. Yanagisawa and T. Shimizu,“Effect of Clearance Volume on Efficiency of Rotary Compressor of Rolling Piston Type”, Transa-ctions of the JSME (Series B), Vol. 48, № 432, 1982, pp. 1492-1500.
- [25] T. Yanagisawa,“Frictional Loss and Piston Behavior of Rotary Compressor of Rolling Piston Type (lst Report, Experimental and Numerical Analysis of Motion of Piston)”, Transactions of the JSME (Series B), Vol. 48, № 429, 1982, pp. 738-740.
- [26] T. Yanagisawa,“Frictional Loss and Piston Behavior of Rotary Compressor of Rolling Piston Type (2nd Report, Analysis of Fric-tional Loss)”, Transactions of the JSME (Ser-ies B), Vol. 48, № 435, 1982, pp. 1854-1861.
- [27] T. Yanagisawa, M. Mori, T. Shimizu, and Y. Ogi,“A Study on Vibrations of Rotary Compressor of Rolling Piston Type”, Transa-ctions of the JSME (Series B), Vol. 49, № 444,1983, pp. 1346-1353.
- [28] T. Yanagisawa, T. Shimizu, M. Dohi, and S. Nihashi,“A Study on Suction Gas Heating of Rotary Compressor of Rolling Piston Type”, Transactions of the JSME(Series B), Vol. 49, № 444, 1983, pp. 1762-1771.
- [29] K. Imaichi, M. Fukushima, S. Muramatsu, and N. Ishii,“Vibration Analysis of Rotary Compressor of Rolling Piston Type”, Transa-ctions of the JSME(Series B), Vol. 49, № 447, 1983, pp. 1959-1970.
- [30] K. Imaichi, M. Fukushima, S. Muramatsu, and N. Ishii,“Vibration Analysis of Rotary Compressors”, Proceedings of the 1982 Purdue Compressor Technology Conference, July 21-23, 1982, pp. 275-282.
- [31] K. Okada and K. Kuyama,“Motion of Rolling Piston in Rotary Compressor”, Proceedings of the 1982 Purdue Compressor Technology Conference, July 21-23, 1982, pp. 178-184.
- [32] T. Yanagisawa, T. Shimizu, I. Chu, and K. Ishijima,“Motion Analysis of Rolling Pistoi in Rotaty Compressor”, Proceedings of the 1982 Purdue Compressor Technology Confere-nce, July 21-23, 1982, pp. 185-192.
- [33] S. lids, S. Hirakawa, Y. Oota, et al.,“Effi-ciency improvement in Rotary Compressor”, Mitsubishi Heavy Industries Giho, Vol. 20, № 3, 1983, pp. 253-261.
- [34] I. Chu, T. Shiga, K. Ishijima, and M. Sa-kaino,“Analysis of the Rolling-Piston Type Rotary Compressor”, Proceedings of the 1978 Purdue Compressor Technology Conference, July 19-21, 1978, pp. 219-225.
- [35] H. Wakabayashi, J. Yuuda, T. Aizawa, and M. Yamamura,“Analysis of Performance in a Rotary Compressor”, Proceedings of the 1982 Purdue Compressor Technology Confere-nce, July 21-23, 1982, pp. 140-147.
- [36] T. Matsuzaka and S. Nagatomo,“Rolling Pis-ton Type Rotary Compressor Performance An-alysis”, Proceedings of the 1982 Purdue Com-pressor Technology Conference, July 21-23, 1982, pp. 149-158.
- [37] H. Tanaka and K. Ishijima,“Noise and Eff-iciency of Rolling Piston Type Rotary Com-pressor for Household Refrigerator and Free-zer”, Proceedings of the 1980 Purdue Comp-ressor Technology Conference, July 23-25,1980, pp. 133-140.
- [38] K. Asami, K. Ishijima, and H. Tanaka,“Improvements of Noise and Efficiency on Roling Piston Type Refrigeration Compressor for Household Refrigerator and Freezer”, Proceedings of the 1982 Purdue Compressor Technology Conference, July 21-23, 1982, pp. 268-274.
- [39] T. Hirahara and O. Ohinata,“An Analysis of Cylinder Over-Pressure Using the Method of Characteristics”, Proceedings of the 1982 Purdue Compressor Technology Conference, July 21-23, 1982, pp. 159-165.
- [40] M. Ozu and T. Itami,“Some Electrical Obs-ervations of Metallic Contact between Lubrica-ted Surfaces under Dynamic Conditions of Ro-tary Compressor”, Proceedings of the 1980 Purdue Compressor Technology Conference, July 23-25, 1980, pp. 105-111.
- [41] S. Nagatomo and S. Kato,“Estimation of the Starting Torque of Refrigerant Rotary Com-presser”, Proceedings of the 1980 Purdue Compressor Technology Conference, July 23-25, 1980, pp. 98-104.
- [42] H. Hayami, H. Ueki, H. Higashimori, and Y. Senoo, “Measurement of Flow in Impeller of Centrifugal Compressor by Means of Las-er-2-Focus Velocimeter”, Transactions of the JSME, Vol. 49, № 441, 1982, pp. 1010-1019.
- [43] N. Hagihara and A. Ishii,“Aerodynamic Fo-rce Measurement Technique and Its Applica-tion of Rotor Blade by Means of Transfer Function Method”, Turbomachinery, Vol. 11,№ 9, 1983, pp. 531-537.
- [44] Y. Nakano and M. Mochizuki,“Optical Blade Vibration Measurement Technique of Axial Flow Compressor”, Turbomachinery, Vol. 10,№ 8, 1982, pp. 467-475.
- [45] M. Endoh, Y. Matsuda, Y. Saito, and M. Matsuki, “Noncontact Measurement Technique and Its Application of Vibration and Tip Cle-arance of Rotor Blade”, Turbomachinery, Vol. 11,№ 9, 1983, pp. 524-530.
- [46] M. Endoh, Y. Matsuda, and M. Matsuki,“Noncontact Measurement of Rotating Blade Vibrations”, Proceedings of the 1983 TokyoInternational Gas Turbine Congress, 1983,pp. 10-12.
- [47] T. Mashimo,“On the Leakage Loss within a Centrifugal Compressor(Investigation with Modeled Curving Flow Channels)”, Memoirs of the Institute of Science and Technology of Meiji University, Vol. 20, № 9, 1981, pp.1-17.
- [48] T. Yamane and M. Mizuma,“Method for Pre-dieting Off-Design Performance of Axial FlowCompressors”, Mitsui Zosen Giho, № 112,1981, pp. 29-36.
- [49] H. Mishina and H. Nishida,“ Performance Prediction of Centrifugal Compressor(1st Re-port, Prediction Method and Numerical Exam-ple)”, Transactions of the JSME, Vol. 49,№ 441, 1982, pp: 1000-1009.
- [50] H. Matsumiya and M. Shirakura,“The Per-formance of Slotted Blades in Cascade(1stReport, Theoretical Analysis)”, Transactions of the JSME, Vol. 45, № 100, 1979, pp. 1787-1799.
- [51] H. Matsumiya and M. Shirakura, “The Per-formance of Slotted Blades in Cascade(2ndReport, Experimental Results)”, Transactions of the JSME, Vol. 45, № 100, 1979, pp.1800-1805.
- [52] M. Shirakura,“Conformal Transaction of Ca-scade of Flat-Plates into a Row of Circular Cylinders”, Transactions of the JSME, Vol. 45, № 399, 1979, pp. 1605-1612.
- [53] M. Inoue, T. Ikui, Y. Kamad, and M. Tas-hiro,“A Design of Axial-Flow Compressor Blades with Inclined Stream Surface and Va-rying Axial Velocity”, Transactions of the JSME, Vol. 45, № 389, 1979, pp. 11-19.
- [54] H. Daiguji and A. Kozaki, “Analysis of Tra-nsonic Cascade Flow Using Method of Strea-mlines”, Transactions of the JSME, Vol. 45,№ 400, 1979, pp. 1779-1786.
- [55] Y. Senoo, M. Kawano, and H. Hayami, “A Study on Circular Cascade Diffusers with Small Aspect Ratios”, Transactions of the JSME, Vol. 45, № 396, 1978, pp. 1099-1107.
- [56] H. Shirahata and H. Daiguji, “Finite Element Analysis of Subsonic Cascade Flows”, Transa-ctions of the JSME, Vol. 47, № 405, 1980, pp. 793-801.
- [57] T. Miyazaki and N. Hirayama,“Rigorous Solution of Compressible Potential Flow Past Two-Dimensional Cascades of Airfoils (Espe-cially for High Subsonic Potential Flow)”,Transactions of the JSME. Vol. 47, NB 419, 1981, pp. 1169-1176.
- [58] H. Daiguji,“Numerical Analysis of 3-D Poten-tial Flow in Centrifugal Turbomachines”,Transactions of the NSME, Vol. 49, № 437, 1982, pp. 11-18.
- [59] Y. Sakamoto, “Slip Factor Dependence on Flow Rate is Centrifugal Compressors”, Tra-nsactions of the JSME, Vol. 49, № 446,1983, pp. 2242-2247.
- [60] M. Kuroumaru, M. Inoue, T. Higaki, F. Abd-Elaziz, and T. Ikui,“measurements of Th-ree-Dimensional Flaw Field behind an Impe-ller by Means of Periodic Malti-Sampling of a Slanted Hot Wire”, Transactions of the JSME, Vol. 48, M 427, 1982, pp. 408-417.
- [61] M. Namba and A. Ishikawa,“Unsteady Lif-ting-Surface Theory for Rotating Annular Transonic and Supersonic Cascades (1st Rep-ort, Mathematical Expressions for Disturbanc Flow Fields and Their Characteristics)”, Tr-ansactions of the JSME, Vol. 48, № 430 1982, pp. 988-997.
- [62] Y. Sakamoto, M. Suyari, A. Nagata, et al.,“A Data Analysis Method for Centrifugal Co-mpressors(Part 1) ”, R & D Kobe Seiko Giho, Vol. 3, № 1, 1983, pp. 80-84,
- [63] Y. Sakamoto, M. Suyari, S. Kinoshita, etal.,“A Data Analysis Method for Centrifugal Compressors(Part 2) ”, R & D Kobe SeikoGiho, Vol. 33, № 2, 1983, pp. 77-80.
- [64] H. Mishina,“An Investigation of the Influence of Relative Velocity Distributions on the Performance of Centrifugal Impellers(2ndReport, Performance of Impellers with Different Specific Speeds and Blade Load Distribution)”, Transactions of the JSME, Vol. 47, № 402, 1980, pp. 221-231.
- [65] H. Mishina,“An Investigation of the Influence of Relative Velocity Distributions on the Performance of Centrifugal Compressors(3rd Report, Low Flow Rate Characteristics of Impellers with Different Diffusion Ratios and Specific Speeds)”, Transactions of the JSME,Vol. 47, № 412, 1980, pp. 2275-2284.
- [66] M. Ishida, Y. Senoo, H. Haraguchi, and K. Kotoura,“Pressure Loss Due to the Shroud Clearance of the Open Shroud Centrifugal Pump”, Transactions of the JSME, Vol. 46, № 407, 1980, pp. 1262-1272. [67] T. Kanernoto, T. Toyoknra, and J. Kurokawa,“Flow in Annular Diffuser(1st Report, Internal Flow and Performance)”, Transactions of the JSME, Vol. 47, № 422, 1981, pp. 1940-1946.
- [68] A. Takehira, M. Tanaka, S. Kawashima, and H. Hanafusa,“On Annular Diffusers of Axial Flow Compressors and Turbines”, Turbo-machinery, Vol. 9, № 4, 1981, pp. 203-210.
- [69] A. Sakurai, “Development and Patent of Diffusers for Centrifugal Compressors”, Turbo-machinery, Vol. 10, № 5, 1981, pp, 312-320.
- [70] N. Tsurusaki, K. Imaichi, and T. Nanii,“Swirl Stai in Non-Vaned Diffusers in Turbomachines”,Turbomachincry, Vol. 10, № 10, 1982, pp. 28-35.
- [71] Y. Sakamoto and M. Suyari,“Simplificated Analysis of Inlet Flow of Non-Vaned Diffusers in Centrifugal Compressors”, Turboma-chinery, Vol. 10, № 4, 1982, pp. 195-204.
- [72] Y. Oda, S. Mizuki, and I. Ariga,“Effects of Inducers on Performance of Ceatrifugal Compressors”, Turbomachinery, Vol. 10, № 12, 1982, pp. 16-22.
- [73] F. Kano. N. Tazawa, and Y. Fukao,“Study of Performance of Vaned Diffusers in Centrifugal Compressors”, Transcations of the JSME, Vol. 49, № 437, 1983, pp. 19-25.
- [74] T. Ogawa, T. Tsuda, and J. Masutani, “On the Flow in the Impeller of Centrifugal Compressor with Inducer”, Transartions of the JSME, Vol. 49, № 437, 1983, pp. 100-107.
- [75] T. Nishiyama and M. Yanome, “Unsteady Re-sponses of Turbine Cascade to Sinusoidal Gust and 1st Wake Energy”, Transactions of the JSME, Vol. 45, № 394, 1979, pp. 763-772.
- [76] T. Nishiyama and. M. Kikuchi, “Effects of Steady Lift and Nonlinear Cumulation on the Unsteady Characteristics of an Oscillating Supersonic Cascade with Subsonic Axial Velocity”, Transactions of the JSME, Vol. 45, № 392, 1979, pp. 441-451.
- [77] T. Nishiyama,“Singularity Representations of Purturbed Flow and Unsteady Characteri-sties for Oscillating Hydrofoils of Finite Cav-ity(1st Report, Two-Dimensional Unsteady Cavity Flow Method)”, Transactions of the JSME, Vol. 46, № 408, 1980, pp. 1372-1382.
- [78] T. Nishiyama,“ingularity Representations of Purturbed Flow and Unsteady Characteris-tics for Oscillating Hydrofoils of Finite Cavi-ty(2nd Report, Three-Dimensional Unsteady Cavity Flow Model)”, Transactions of the JSME, Vol. 46, № 408, 1980, pp. 1383-1392.
- [79] T. Nishiyama,“Singularity Representations of Purturbed Flow and Unsteady Characteris-tics for Oscillating Hydrofoils of Finite Cavity(3rd Report, Experiments and Comparisons)”, Transactions of the JSME, Vol.46, № 408, 1980, pp. 1393-1397.
- [80] T. Nishiyama, “Singularity Representations of Purtubred Flow and Unsteady Characteristics for Oscillating Hydrofoils of Finite Cavity(4th Report, Wake Energy and Unsteady Drag)”, Transactions of the JSME, Vol. 48, № 425, 1982, pp. 9-17.
- [81] M. Kikuchi,“Interaction of Supersonic Linear Cascade with Sinusoidally Distorted Flow be-tween Two Parallel Plates”, Transactions of the JSME, Vol. 46, № 412, 1980, pp. 2247-2256.
- [82] Y. Murakami, T. Hirose, and T. Adachi, “Unsteady Pressure on a Combered Blade under Periodic Gusts”, Transactions of the JSME, Vol. 47, № 424, 1981, pp. 2235-2242.
- [83] Y. Murakami, T. Hirose, T. Adachi, and M. Ishikawa,“Unsteady Pressure on a Com-bered Blade under Periodic Gusts(Comparisonwith the Experiments)”, Transactions of the JSME, Vol. 48, № 436, 1982, pp. 1423-2433.
- [84] M. Namba and A. Ishikawa,“Unsteady Lifting-Surface Theory for Rotating Annular Transonic and Supersonic Cascades(2nd Report,Unsteady Aerodynamic Forces on Oscillating Blades)”, Transactions of the JSME, Vol. 48, № 434, 1982, pp. 1833-1841.
- [85] M. Matsushita and T. Akamatsu,“Numerical Analysis of Unsteady Laminar Boundary Lay-ers with Separation Using One-Parameter In-tegral Method(2nd Report, Application to an Elliptic Cylinder)”, Transactions of the JSME, Vol. 49, № 437, 1983, pp. 26-32.
- [86] T. Nishiyama and H. Nishiyama,“Analytic Flow Model of Unsteady Partial Cavitation(Experimental Verifications by Pitching Hydrofoil)”, Transactions of the JSME, Vol. 49,№ 438, 1983, pp. 308-318.
- [87] K. Ishihara and M. Funakawa,“Aerodynamic Force Added to Blades Subjected to Gusts and Their Vibratory Response(lst Report, Analysis on Stress Evaluation)”, Transactions of the JSME, Vol. 45, № 397, 1979, pp.1213-1223.
- [88] K. Ishihara and M. Funakawa,“Aerodynamic Force Added to Blades Subjected to Gusts and Their Vibratory Response(2nd Report,Experiments)”, Transactions of the JSME,Vol. 45, № 397, 1979, pp. 1224-1233,
- [89] H. Murai and S. Shimizu,“Hydroelastic Characteristics of Flexible Supercavitating Hydrofoils(lst Report, Two-Dimensional Theory at Zero Cavitation Number when Clampedat Trailing Edge)”, Transactions of the JSME,Vol. 46, № 412, 1979, pp. 2257-2265.
- [90] H. Murai and S. Shimizu,“Hydroelastic Characteristics of Flexible Supercavitating Hydro-foils(2nd Report, Two-Dimensional Theory at Zero Cavitation Number when Supported Elastically)”, Transactions of the JSME, Vol.46, № 412, 1979, pp. 2266-2274.
- [91] Y. Hanamura and H. Tanaka,“Countermea-sures of Flutter Due to Ill-Balanced Cascades”,Transactions of the JSME, Vol. 46, № 403,1980, pp. 373-382.
- [92] Y. Matsudaira and. T. Nishiyama,“Analysisfor Unsteady Characteristics of an Oscillating Cascade with Separation(2nd Report, Hig hTurning Angle)”, Trangactions of the JSME,Vol. 46, № 410, 1980, pp. 1881-1889.
- [93] M. Kikuchi,“Radiation of Acoustic Energy Generated by Interaction of Supbrsonic Cascade with Inlet-Distortion”, Transactions of the JSME, Vol. 46, № 411, 1980, pp. 2061-2068
- [94] S. Kaji, H. Takata, and N. Niwa,“Flutter of Cascades in Parallel Shear Flow”, Transa-tions of the JSME, Vol: 47, № 319, 1981,pp. 1177-1186.
- [95] T. Nishiyama and T: Tanura,“The Oscilla-ting Loaded Aerofoil Cascade Theory for Per-turbation Expansions(2nd Order Correction and Its Effects on Flutter Margin)”, Transac-ctions of the JSME, Vol. 47, № 427, 1981,pp. 2253-2264.
- [96] M. Kikuchi,“Flutter Characteristics of Sup-ersonic Linear Cascade between Two Parallel Plates”, Trans