庄叔平,谷波,方继华,张杰
ZHUANG Shu-ping,GU Bo,FANG Ji-hua,ZHANG Jie

• 1:上海交通大学

摘要(Abstract)：

利用计算机设计选型取代传统高成本、低效率且费时的空调箱选型,以Visual Basic 6.0为编译环境,Auto CAD软件为图形输出平台,Microsoft Office软件为文件输出平台,开发了一款空调箱数字化分析与选型软件,通过自定义项目、自定义机组、设计机组功能段,对表冷器、加热器、热回收、加湿器等重要功能段进行建模,对空调箱进行系统全面的分析选型,并且能够输出Auto CAD图纸及选型机组信息的Excel/Word文件,大大降低空调箱设计成本及开发周期,提高整体设计效率及精度。
A digital analysis and model selection software for air handling units was developed to realize using computer simulation method to replace the traditional air handling units design method which is high-cost,low-efficiency and time-consuming. Visual Basic 6. 0 was taken as the programming platform,Auto CAD was taken as the graphic output platform and Microsoft Office software was taken as the information output platform. By customizing project information,customizing unit information,combining function sections randomly,modeling in many sections as cooler,heater,heat recovery,humidifier and so on,air handling units can be systematically designed and analyzed,the necessary information can be output in Auto CAD files and Microsoft Word / Excel files to reduce the AHU design cost,save time,and increase the design efficiency and accuracy.

关键词(KeyWords)： 组合式空调;软件开发;设计选型;建模;翅片管换热器
air handling units;software developing;design and model selection;modeling;fin and tube heat exchangers

Abstract:

Keywords:

基金项目(Foundation):

作者(Author): 庄叔平,谷波,方继华,张杰
ZHUANG Shu-ping,GU Bo,FANG Ji-hua,ZHANG Jie

参考文献(References)：

• [1]刘刚,刘华清.组合式空调机组现状与节能研究[J].东华大学学报,2003,29(4):28-31.
• [2]Romero-Méndez R,Sen M,Yang K T,et al.Effect of fin spacing on convection in a plate fin and tube heat exchanger[J].International Journal of Heat and Mass Transfer,2000,43(1):39-51.
• [3]Wang C C,Lee W S,Sheu W J,et al.Parametric study of the air-side performance of slit fin-and-tube heat exchangers in wet conditions[J].Proceedings of the Institution of Mechanical Engineers,Part C:Journal of Mechanical Engineering Science,2001,215(9):1111-1121.
• [4]孟华,龙惟定,王盛卫,等.适于系统仿真的表冷器模型及其实验验证[J].暖通空调,2004,34(8):17-20.
• [5]李闯,谷波,郝源成.空调箱表冷器性能仿真与结构优化[J].流体机械,2012,40(3):71-75.
• [6]陈劲晖,李萌.全热转轮热回收装置及新风比调节在节能建筑中的应用探讨[J].暖通空调,2008,38(5):44-47.
• [7]陈修敏,张九根.数据中心机房空调系统设计及气流优化分析[J].流体机械,2014,42(11):79-82,86.
• [8]冯毅,田丽军,陈佳.环状与蜂窝蓄热体传热与阻力特性试验研究[J].压力容器,2014,31(9):14-22.
• [9]曾洪涛,田文刚,王智欣,等.大型抽水蓄能机组调节系统建模与仿真平台开发[J].排灌机械工程学报,2014,32(12):1045-1050,2056.
• [10]张铁钢,梁学峰,王朝平.新型高效扭曲管双壳程换热器的研制[J].压力容器,2014,31(1):68-74.
• [11]黄翔,白延斌,汪超,等.全空气蒸发冷却空调系统的设计方法[J].流体机械,2014,42(1):68-74.
• [12]刘传聚,滕英武,朱轶勋.乙二醇热回收空调系统的节能分析[J].暖通空调,2001,31(4):90-93.