郎涛,施卫东,陈刻强,李伟,程成
LANG Tao,SHI Wei-dong,CHEN Ke-qiang,LI Wei,CHENG Cheng

• 1:江苏大学国家水泵及系统工程技术研究中心

摘要(Abstract)：

针对污水池清淤问题,在一潜水排污泵进口处设置一搅拌装置,研究带有前置搅拌装置污水泵在污水池中的流动特性。研究表明,基于CFD计算的污水泵外特性结果与试验结果基本吻合,数值模拟结果具有较好精度;对比无前置搅拌装置的潜水排污泵,发现装有搅拌装置后泵的轴功率升高,效率下降;对整个污水池系统的流场进行分析,发现污水池内出现旋涡及附壁效应,说明泵前设置搅拌装置有利于池底清淤;固相颗粒主要聚集于叶轮流道中下游及蜗壳周边壁面处,叶片工作面的进口、出口以及叶片背面中间部位磨损稍微严重,而叶片流道中间部位及靠近叶片背面出口处的磨损相对轻微。
For cesspool dredging issue,a pre-mixing device was installed at the inlet of a sewage pump,which was placed in a water tank to study the flow field and abrasion characteristics. To further ensure the accuracy of the simulation results,the sewage pump was produced and tested. Comparison between numerical simulation and experimental results is presented to prove the accuracy of numerical simulation. Then CFD was done on the pump in different conditions,and we found that when the pump is equipped with a stirring device,the shaft power will increase and the efficiency will decrease. Finally,by analyzing the entire system of the cesspool,we found that there are vortexes and the Coanda effect in the tank,indicating that the pump set with premixing device is in favor of dredging the bottom. Solid particles are mainly gathered in the middle and downstream of the impeller passages and at the volute peripheral wall surfaces,while the solid particles on pressure surfaces are focused at outlet and that on suction surfaces are mainly concentrated in the middle of the flow channel near the inlet.

关键词(KeyWords)： 离心泵;固液两相流;搅拌流场;CFD
centrifugal pump;solid-liquid two-phase turbulent flow;stirring flow field;CFD

Abstract:

Keywords:

基金项目(Foundation): 江苏省“333工程”科研项目(BRA2013188);; 江苏省“六大人才”高峰项目(HYZB-002);; 江苏省产学研联合创新资金前瞻性研究项目(BY2013065-03);; 镇江市农业支撑项目(NY2013031);; 江苏高校优势学科建设工程项目

作者(Author): 郎涛,施卫东,陈刻强,李伟,程成
LANG Tao,SHI Wei-dong,CHEN Ke-qiang,LI Wei,CHENG Cheng

参考文献(References)：

• [1]陈志平,章序文,林兴华,等.搅拌与混合设备设计选用手册[M].北京:化学工业出版社.
• [2]杨春晖,解宝忠,史文藻,等.三叶后掠式搅拌器的流场试验研究[J].聚氯乙烯,1999,(1):21-26.
• [3]Nouri J,Whitelaw J.Particle velocity characteristics of dilute to moderately dense suspension flows in stirred reactors[J].International Journal of Multiphase Flow,1992,18(1):21-33.
• [4]张敏革,张吕鸿,姜斌,等.非牛顿流体搅拌流场的数值模拟研究进展[J].化工进展,2009,28(8):1296-1301.
• [5]田飞.潜水搅拌机射流特性及实验研究[D].镇江:江苏大学,2012:7-11.
• [6]潘中永,李帅,张华,等.搅拌罐内纸浆悬浮液内部流动数值模拟[J].排灌机械工程学报,2011,29(3):204-208.
• [7]王川,施卫东,陆伟刚,等.不同叶片厚度的不锈钢冲压井泵性能模拟与试验[J].农业机械学报,2012,43(7):94-99.
• [8]胡效东,田强,戚振,等.基于滑移网格的反应釜内部流体动力学特性研究[J].压力容器,2013,30(7):30-38,55.
• [9]黄思,宋志光,杨文娟,等.多级多出口离心泵的流动能耗计算分析[J].流体机械,2014,42(3):28-31.
• [10]胡良波,周邵萍,张浩,等.湍流模型对多级离心泵性能预测的适用性[J].流体机械,2014,42(10):26-31.
• [11]李冰冻.航道整治河段流动特性的三维数值模拟[D].四川:四川大学,2003:42-44.
• [12]汪礼.常用湍流模型适用性分析及翼型VOF数值模拟[D].武汉:华中科技大学,2007:33-38.
• [13]何子干,Rodi W,Frohlic J,等.光滑及粗糙明槽湍流流动大涡模拟[J].水动力学研究与进展,2000,15(2):191-201.