新型射流式自吸喷灌泵的设计及试验The Design and Experiment for New Type of Flow-ejecting Self-priming Spray Pump
文海罡,郭晨旭,李正贵
WEN Hai-gang,GUO Chen-xu,LI Zheng-gui
摘要(Abstract)：
为改进射流式自吸喷灌泵的性能,设计了一种带不对称出口导流器的射流式自吸喷灌泵并进行了样机试验。试验结果表明:带不对称出口导流器的射流式自吸喷灌泵性能达到设计要求,对比同参数自吸泵(本田泵)其外特性参数有明显优势,同时其自吸时间相对于原带对称出口导流器的射流式自吸喷灌泵有了大幅下降。
In order to improve the performance of flow-ejecting self-priming spray pump,a new type of flow-ejecting self-priming spray pump with a diffuser was designed and experiment study of the pump was carried out. The experiment results show that the performance of the pump meet the design requirements,compared with the self-priming pump(Honda pump) which has the same parameters,the new pump have obvious advantages. And,the self-priming time relative to the original pump with symmetric diffuser have dropped.
关键词(KeyWords)：
喷灌泵;导流器;试验;自吸时间
spray pump;diffuser;experiment;self-priming time
基金项目(Foundation): 国家“863”高技术研究发展计划资助项目(2011AA100506);; 四川省教育厅自然科学重大培育项目(17CZ0034)
作者(Author):
文海罡,郭晨旭,李正贵
WEN Hai-gang,GUO Chen-xu,LI Zheng-gui
参考文献(References)：
- [1]吕智君,兰才有,王福军.自吸泵研究现状及发展趋势[J].排灌机械,2005,23(3):1-4.
- [2]王洋,李贵东,曹璞钰,等.泵腔内部环流对射流式自吸泵自吸性能的影响[J].农业机械学报,2014,45(11):129-133.
- [3]夏丽,武鹏,吴大转.蜗壳回流孔对自吸泵性能的影响[J].工程设计学报,2015,22(3):284-289.
- [4]王洋,彭帅,刘瑞华,等.旋涡自吸泵内部流场压力脉动数值模拟[J].排灌机械工程学报2015,33(7):583-588.
- [5]潘中永,张大庆,李彦军,等.喷灌与滴灌两用自吸泵设计与分析[J].华中科技大学学报(自然科学版),2014,42(3):122-126.
- [6]王春林,司艳雷,郑海霞,等.旋流自吸喷灌泵内部流场的数值模拟[J].排灌机械,2008,26(2):31-35.
- [7]孙幼波,陈涛,杨帅,等.立式自吸泵水力性能分析及内部结构的改进[J].浙江大学学报(工学版),2013,47(2):332-338.
- [8]沙毅,杨敏官,赵斌娟,等.自吸泵叶轮型式及隔舌间隙对性能的影响[J].水泵技术,2002(4):9-11.
- [9]李红,徐德怀,涂琴,等自吸泵启动过程气液两相流动的数值模拟[J].农业工程学报,2013,29(3):77-83.
- [10]关醒凡.现代泵理论与设计[M].北京:宇航出版社,2010.
- [11]王川.低比速多级自吸喷灌泵能量损失与自吸机理研究[D].镇江:江苏大学,2015.
- [12]朱荣生,燕浩,李继忠,等.小型气液射流泵内部流场数值模拟及优化选择[J].排灌机械工程学报,2010(3):207-210.
- [13]王涛,徐志强.喷灌泵自吸过程瞬态水力特性的试验研究[J].中国农村水利水电,2014(5):57-60.
- [14]周英环,袁寿其,刘建瑞,等.新型射流式喷灌自吸泵的水力设计与对比试验研究[J].中国农村水利水电,2009(4):62-64.
- [15]向宏杰.射流式自吸喷灌泵数值模拟及优化设计[D].镇江:江苏大学,2012.