戴辰辰,郭鹏程,罗兴锜
DAI Chen-chen,GUO Peng-cheng,LUO Xing-qi(Xi′an University of Techolgy

• 1:西安理工大学

摘要(Abstract)：

采用CFD计算软件CFX11.0,基于标准的k—ε紊流模型和SIMPLEC算法,对带间隙的轴流泵的内部流场进行了数值模拟。研究和分析了0、1、1.5、2和2.5mm五种不同径向间隙对轴流泵的能量特性的影响,并进行了性能预估。本次数值模拟捕捉到了叶顶间隙泄漏流动和间隙泄漏涡,并通过分析得出了间隙泄漏涡是由于间隙泄漏流与主流发生卷吸而形成的。
Based on the k-ε turbulence model and SIMPLE algorithm,CFD calculation software CFX11.0 was used to carry out the numerical simulation of the axial pump's internal flow field.The influence was researched and analyzed which 0mm,1mm,1.5mm,2mm and 2.5mm these six tip clearance on axial flow pump's energy characteristics.And the same time the performance prediction was carried out.This numerical simulation catches the tip clearance leakage flow and leakage vortex,and concluded from analysis that the tip clearance leakage vortex is formed by leakage flow entraining with mainstream.

关键词(KeyWords)： 轴流泵;叶顶间隙;泄漏涡;数值模拟
axial flow pump;tip clearance;leakage vortex;numerical simulation

Abstract:

Keywords:

基金项目(Foundation): 国家自然科学基金项目(90410019)

作者(Author): 戴辰辰,郭鹏程,罗兴锜
DAI Chen-chen,GUO Peng-cheng,LUO Xing-qi(Xi′an University of Techolgy

参考文献(References)：

• [1]韩小林.叶轮径向间隙对喷水推进轴流泵性能的影响[J].江苏船舶,2008,25(1):5-8.
• [2]李龙,王泽.轴流泵内部流动的数值模拟研究[J].流体机械,2007,35(4):16-18.
• [3]梁开洪,张克危,许丽.轴流泵叶顶间隙流动的计算流体动力分析[J].华中科技大学学报,2004,32(9):36-38.
• [4]杨昌明,陈次昌,王金诺,等.轴流泵端壁间隙流动特性的数值研究[J].机械工程学报,2003,39(9):49-51.
• [5]Oh H W,Yoon E S,Kim K S,et al.A practical ap-proach to the hydraulic design and performance analy-sis of a mixed-flow pump for marine water-jet propul-sion[A],Proceedings of the Institution of MechanicalEngineers,Part A:Journal of Power and Energy[C].,2003,217(6):659-664.
• [6]Miner Steven M.Evaluation of blade passage analysisusing coarse grids[A].Journal of Fluids Engineering,Transactions of ASME[C].,2000,122(2):345-348.