叶晓琰,许国乐,蒋小平
YE Xiao-yan,XU Guo-le,JIANG Xiao-ping(Jiangsu University

• 1:江苏大学

摘要(Abstract)：

针对五缸往复泵曲轴结构形状和受力情况都比较复杂的状况,通过对五拐三支承曲轴建立整体三维模型,在MSC.Patran/MSC.Nastran软件环境下对其进行有限元模态分析,并联合动力学仿真软件MSC.Adams对该曲轴进行瞬态动力学有限元分析,得到曲轴在工作循环中的最大危险点及其应力值,并利用这些数据进行疲劳强度校核。提出了一种基于模态法瞬态有限元分析的曲轴疲劳强度校核的方法,为往复泵曲轴设计和疲劳强度校核计算提供了有价值的指导参考。
According to the situation that structure and stress of crankshaft used in five-cylinder reciprocating pump is complex.By establishing entire tridimensional solid of crankshaft,finite element modal analysis is operated by MSC.Patran/MSC.Nastran software.In addition,transient-dynamics analysis is operated by combining MSC.Adams software.Peril point and its stress are obtained,and fatigue intensity is calculated by using these data.A new method that fatigue intensity is checked by the modal method transient finite element analysis is found.The guide and theories used in design of crankshaft and calculate of fatigue intensity are provided.

关键词(KeyWords)： 往复泵;曲轴;有限元分析;疲劳校核
reciprocating pump;crankshaft;finite element analysis;fatigue calculation

Abstract:

Keywords:

基金项目(Foundation): 江苏省高技术研究基金项目(BG2006024);; 江苏大学高级人才启动基金项目(06JDG067)

作者(Author): 叶晓琰,许国乐,蒋小平
YE Xiao-yan,XU Guo-le,JIANG Xiao-ping(Jiangsu University

参考文献(References)：

• [1]《往复泵设计》编写组.往复泵设计[M].北京:机械工业出版社,1987.
• [2]韩松涛,郝志勇.6102B型柴油机曲轴三维有限元模态分析与试验研究[J].农业机械学报,2001,(4):74-77.
• [3]李忠杰,王树宗,练永庆.某活塞发动机机体组合结构模态分析[J].舰船科学技术,2007,(4):125-127.
• [4]冯平法,盛力,吴志军,等.柱塞式液压泵曲轴载荷特性及力学性能分析[J].机械设计与制造,2007,5(5):155-157.
• [5]马爱军,周传月,王旭,等.Patran和Nastran有限元分析专业教程[M].北京:清华大学出版社,2005.
• [6]张国庆,黄伯超,浦耿强,等.基于动力学仿真和有限元分析的曲轴[J].内燃机工程,2006,(1):41-44.
• [7]华剑,周思柱,李宁.三缸单作用柱塞泵曲轴的理论分析与强度计算[J].机械研究与应用,2006,(6):14-15.
• [8]李增刚.ADAMS入门详解与实例[M].北京:国防工业出版社,2006.
• [9]Christiansen,Henning.Flexible query answering sys-tems[M].NewYork:Spring-Verlag Berlin Herdeberg,2004.
• [10]ZHANG guoqing,PU gengqiang,WANG chengtao.fa-tigue life predication of crankshaft made of material48MV based on fagigue tests,dynamic simulation andFEA[M].Shanghai:mechanical engineering,2006.