于凯,王振波,金有海,孙治谦,侯胜超
YU Kai,WANG Zhen-bo,JIN You-hai,SUN Zhi-qian,HOU Sheng-chao(China University of Petroleum(East China)

• 1:中国石油大学(华东)

摘要(Abstract)：

在其它结构参数和操作参数不变的情况下,对锥角为5°、7°和10°的导叶式固液分离旋流器的分离性能进行了试验研究。试验结果表明,在一定范围内,7°锥角旋流器总分离效率最高、压降较低;锥角不同,对不同粒径的固体颗粒的分离效率不同;随着锥角的减小,旋流器对悬浮物颗粒的分离效率呈上升的趋势。
Vane-guided solid-liquid separation hydrocyclone with three different kinds of taper angles in terms of 5°,7° and 10° was researched while with other structural parameters and operating parameters remain unchanged.The experimental results demonstrate that vane-guided hydrocyclone with taper angles of 7° is best characterized by the highest separation efficiency,a comparatively low pressure drop;there is a definite link between the angle of cone and the separation efficiency of solid particles which have different grain diameters;there is an upward trend as to the separation efficiency of suspended matters with the angle of cone decreasing.

关键词(KeyWords)： 锥角;固液分离;导叶式旋流器
angle of cone;solid-liquid separation;vane-guided hydrocyclone

Abstract:

Keywords:

基金项目(Foundation): 中国石油大学(华东)研究生创新工程资助项目(CX-1225)

作者(Author): 于凯,王振波,金有海,孙治谦,侯胜超
YU Kai,WANG Zhen-bo,JIN You-hai,SUN Zhi-qian,HOU Sheng-chao(China University of Petroleum(East China)

参考文献(References)：

• [1]张丹,陈晔.锥角对固液水力旋流器流场及其分离性能的影响[J].流体机械,2009,37(8):11-16.
• [2]丁旭明,王振波,金有海.两种入口结构旋流器性能对比试验研究[J].化工机械,2005,32(2):69-71.
• [3]王振波,陈磊,金有海.不同流量条件下导叶式液-液水力旋流器流场测试[J].流体机械,2008,36(9):11-15.
• [4]徐继润,刘正宁,邢军,等.水力旋流器内颗粒运动的几个问题[J].过滤与分离,2002,12(3):10-13.
• [5]贺杰,蒋明虎.水力旋流器[M].北京:石油工业出版社,1996:105-108.