杨昌智;彭红;商宇轩;刘倩;

• 1:湖南大学土木工程学院

摘要(Abstract)：

提出一种新型旋风分离器,与传统旋风分离器相比,在分离器内外涡旋交界面处设置一组沿气流旋转方向由内向外的旋流叶片,以阻挡含尘气流中的颗粒进入内涡旋区。基于CFD,采用雷诺应力模型与离散相的随机轨道模型,对分离器进行气固两相流动数值模拟,比较分析添加旋流叶片前后的分离器性能。对常规及添加旋流叶片的旋风分离器的压降、分离效率与入口气流速度的关系进行了试验研究。试验结果表明,与传统分离器相比,添加旋流叶片的旋风分离器在入口流速较小时,总效率提升明显;在入口流速较大时,添加旋流叶片后的分离器压降略有增大,分割粒径减小显著。添加旋流叶片使分离器的分离效率得到提升,对小粒径颗粒的分离效率提升作用尤为明显。

关键词(KeyWords)： 新型旋风分离器;旋流叶片;CFD;数值模拟;分离效率

Abstract:

Keywords:

基金项目(Foundation):

作者(Author): 杨昌智;彭红;商宇轩;刘倩;

Email:

DOI:

参考文献(References)：

• [1] Chmielniak T,Brycakowski A.Method of calculation of a new cyclone-type separator with swirling baffle and bottom take off of clean gas-part I:Theoretical approach[J].Chen.Eng.Process,2001,41:441-448.
• [2] Chmielniak T,Brycakowski A.Method of calculation of a new cyclone-type separator with swirling baffle and bottom take off of clean gas-part II:Experimental verification[J].Chen.Eng.Process,2001,40:245-254.
• [3] Kim H,Lee K,Kuhlman M.Exploratory design modifications for enhancing cyclone performance[J].Aerosol Science,2001(32):1135-1146.
• [4] Wang W,Zhang P,Wang L,et al.Structure and performance of the circumfluent cyclone[J].Powder Technology,2010(200):158-163.
• [5] Pei B,Yang L,Dong K,et al.The effect of cross-shaped vortex finder on the performance of cyclone separator[J].Power Technology,2017(313):135-144.
• [6] 段继海,吴凯,陈光辉,等.高效Stairmand型旋风除尘器流场导流与引流[J].高校化学工程学报,2016,30(1):26-32.
• [7] Li Q,Xu W,Wang J,et al.Performance evaluation of a new cyclone separator-Part I experimental results[J].Separation and Purification Technology,2015(141):53-58.
• [8] Li Q,Xu W,Wang J,et al.Performance evaluation of a new cyclone separator-Part II simulation results[J].Separation and Purification Technology,2015(160):112-116.
• [9] Funk P.Reducing cyclone pressure drop with evasés [J].Power Technology,2015(272):276-281.
• [10] Sibanda V,Greenwood R,Seville J.Particle separation from gases using cross flow filtration[J].Powder Technology,2001(118):193-201.
• [11] Mazyan W,Ahmadi A,Ahmed H,et al.Increasing efficiency of natural gas cyclones addition of tangential chambers[J].Journal of Aerosol Science,2017(110):36-42.
• [12] 梁嘉豪,李阳,孔祥功.导流板对旋风分离器内气固两相分离性能的影响[J].过程工程学报,2014,14(1):36-41.
• [13] 李琴,邹康,刘海东,等.入口高宽比对旋风分离器壁面冲蚀的影响[J].流体机械,2017,45(7):52-57.
• [14] 张勇,周忠贤,蒋明虎,等.基于响应面法的旋风分离器结构参数的优化[J].流体机械,2018,46(12):32-38.
• [15] 李琴,邹康,刘海东,等.基于颗粒受力的旋风分离器冲蚀机理的研究[J].流体机械,2017,45(3):42-47.
• [16] 李杰,马欣,赖科,等.排气管内置壁面厚度对旋风分离器性能的影响[J].流体机械,2018,46(9):24-30.
• [17] 孙一坚,沈恒根.工业通风[M].第四版.北京:中国建筑工业出版社,2010:77-79.
• [18] Cortes C,Gil A.Modeling the gas and particle flow inside cyclone separators[J].Progress in Energy & Combustion Science,2007(33):109-452.
• [19] Vandoormaal J,Raithby G.Enhancements of the SIMPLE method for predicting incompressible fluid flows[J].Numerical Heat Transfer Applications,1984(7):147-163.
• [20] Raoufi A,Shams M,Farzaneh M,et al.Numerical simulation and optimization of fluid flow in cyclone vortex finder[J].Chem.Eng.Process,2008(47):128-137.
• [21] ANSYS.ANSYS Fluent 16.1 Theory Guide[Z].Canonsburg,2015.
• [22] Dirgo J,Leith D,Cyclone collection efficiency:comparison of experimental results with theoretical predictions[J].Aerosol Science and Technology,1958(4):401-415.