陆锋;冯秀;
LU Feng1 FENG Xiu2(1.Department of Automation,Nanjing Institute of Technology,Nanjing 211167,China; 2.Nanjing College of Chemical Technology,Nanjing 210048,China)

• 1:南京工程学院
• 2:南京化工职业技术学院

摘要(Abstract)：

在分析了国内外在机械密封监控系统研究现状的基础上,制定了机械密封监控系统,该系统在硬件上采用DSP,在软件上采用先进的智能控制算法。它可以以一种预程序化受控方式对密封的工作条件和环境的变化做出快速的反应,使机械密封在满足泄漏量、温度、磨损率等反馈参数的要求下,处于最佳的工作状态,从而提高机械密封的可靠性并延长其寿命。
Based on analysis of research on monitoring systems of mechanical seals at home and abroad,a monitoring system of mechanical seal was developed,in which DSP and advanced intelligent control algorithms were used.The mechanical seals with the monitoring system can adapt quickly to changes of working conditions and environment and locate in the best working state satisfying requirements of feedback parameters,such as the leakage,the temperature and the wear rate.Thereby the reliability of mechanical seals is enhanced and the lifetime is prolonged.

关键词(KeyWords)： 机械密封;监控系统;数字信号处理器
mechanical seal;monitoring-control system;digital signal processor(DSP)

Abstract:

Keywords:

基金项目(Foundation): 江苏高校高新技术产业发展项目(JH08-29);; 江苏省高校“青蓝工程”资助;; 南京工程学院科研项目(KXJ08041)

作者(Authors): 陆锋;冯秀;
LU Feng1 FENG Xiu2(1.Department of Automation,Nanjing Institute of Technology,Nanjing 211167,China; 2.Nanjing College of Chemical Technology,Nanjing 210048,China)

参考文献(References)：

• [1]Fischbach M J.Dry Seal Applications in CentrifugalCompressors[J].Hydrocarbon Processing,1989,68(10):47-51.
• [2]Gordon S B and Dong V.Upstream Pumping:A NewConcept in Mechanical Sealing Technology[J].Lubri-cation Engineering,1990,46(4):213-217.
• [3]关家麒.约翰.克兰28型干气密封系列产品介绍[J].流体机械,1995,23(4):34-37.
• [4]赵亚萍.双向干气密封的研制情况及技术分析[J].流体机械,1996,24(4):46-47.
• [5]郝木明,胡丹梅,杨惠霞.上游泵送机械密封的研究开发及应用[J].流体机械,2001,29(2):13-16.
• [6]ZHANG Jin-feng,YUAN Shou-qi,FU Yong-hong,et al.A Numerical Simulation of 3-D Inner FlowIn Up-Stream Pumping Mechanical Seal[J].Journalof Hydrodynamics,2006,18(5):572-577.
• [7]Salant R F,Adwords W,Kan P L.可控机械密封装置[P].中国发明专利CN1009752B,1990-09-26.
• [8]Salant R F,Wolff P,Navon S.Electronically controlled mechanical seal for aerospace applications-part I:design,analysis,and steady state test[J].TribologyTransaction,1994,37(1):189-195.
• [9]彭旭东,顾永泉,王汝美.相态监控机械密封的研制和应用[J].石油化工设备技术,1995,16(3):30-33.
• [10]Etsion I.Ideas and tendencies in future mechanicalseal department.Lubrication Engineering,1990,46(2):122-125.
• [11]Millor A L.Kothlusg J N.机械密封装置的自适应控制系统[P].中国发明专利CN1007835B,1990-05-02.
• [12]毛绍贝,郭明,黄勇,等.机械密封可控性研究[J].润滑与密封,1997,(2):35-36.
• [13]孙见君,魏龙,朱洪生.弹簧比压可控振动可测型机械密封试验装置[J].石油机械,2002,30(2):25-28.
• [14]赵增顺,贾丽.高参数机械密封试验台数据采集及控制系统[J].石油机械,2004,32(1):1-3.
• [15]任宝杰,郝木明,杨志军.多工况机械密封性能实验装置及测控系统设计[J].润滑与密封,2009,34(12):98-101.
• [16]周剑锋,顾伯勤.螺旋槽机械密封的可控性[J].机械工程学报,2009,45(1):106-110.
• [17]乐秀,刘辉,张桂枝,等.微机保护中通用处理器和DSP的通信[J].河海大学学报,2001,29(5):64-69.
• [18]王念旭.DSP基础与应用系统设计[M].北京航空航天大学出版社,2001.