俞树荣,曹兴岩,丁雪兴,韩明君,张伟政
YU Shu-rong,CAO Xing-yan,DING Xue-xing,HAN Ming-jun,ZHANG Wei-zheng (Lanzhou University of Technology

• 1:兰州理工大学

摘要(Abstract)：

利用Solidworks软件对螺旋槽干气密封端面五种不同气膜厚度进行三维立体模型建模,采用FLUENT前处理功能对其进行网格划分。在特定工况下,利用Fluent流场计算软件对五种端面微尺度流场模型进行数值计算,求出压力沿径向分布和气膜厚度对应的开启力,基于最小二乘法原理基础上,求出开启力与厚度的五次多项式,在对多项式关于气膜厚度求导,得出气膜刚度与气膜厚度的四次多项式。结果表明:气膜刚度随着气膜厚度的增大而减小,且随着气膜厚度的增加气膜刚度随厚度变化曲线趋于平稳,为了使干气密封长期安全、稳定的工作,端面气膜应有足够大的刚度。
Three-dimensional models of spiral groove dry gas seal with five different gas film thicknesses were built by Solidworks software,and all of these five models were screened by Gambit software.In specific conditions,the five kinds of models were numerically calculated by Fluent software and the pressure distribution and gas film thrust were obtained.The polynomial of opening force and film thickness were obtained using the least squares method.Polynomials of gas film stiffness and gas film thickness were obtained through derivation of film thickness.The result shows that the gas film stiffness decreases with the increase of the film thickness.In order to stabilize the dry gas seal system,the generation of gas film with enough stiffness is necessary.

关键词(KeyWords)： 螺旋槽;多项式拟合;气膜刚度;气膜厚度;开启力
spiral groove;polynomial fitting;gas film stiffness;film thickness;opening force

Abstract:

Keywords:

基金项目(Foundation): 国家自然科学基金资助项目(50965010);; 高等学校博士学科点专项科研基金项目(20096201110001)

作者(Author): 俞树荣,曹兴岩,丁雪兴,韩明君,张伟政
YU Shu-rong,CAO Xing-yan,DING Xue-xing,HAN Ming-jun,ZHANG Wei-zheng (Lanzhou University of Technology

参考文献(References)：

• [1]杨惠霞,王玉明.泵用干气密封技术及应用研究[J].流体机械,2005,33(2):1-4.
• [2]莫才颂,林荣雄.应用干气密封解决炼油厂富气压缩机密封泄漏的研究[J].流体机械,2010,38(5):55-58.
• [3]黄莉,彭旭东,白少先,等.不同型槽端面干气密封的性能对比研究[J].流体机械,2010,38(10):21-24.
• [4]Yu X Q,He S,Cai R L.Frictonal Characteristics ofMechanical Seals with a Laser-textured SealFaces[J].J of Materials Processing Tech,2002,129(1-3):463-467.
• [5]彭建.螺旋槽干气密封优化设计[J].流体机械,1995,23(3):9-11.
• [6]MOORE J J.Three dimensional CFD Rotor DynamicAnalyses of Gas Labyrinth Seals[J].Journal of Vibra-tion Acoustics,2003,125:427-433.
• [7]林培峰,张秋翔,蔡纪宁,等.螺旋槽干气密封的有限元分析[J].北京化工大学学报,2002,29(3):60-62.
• [8]尹晓妮,彭旭东.考虑滑移流条件下干式气体密封的有限元分析[J].润滑与密封,2006,31(4):57-59.
• [9]Marco Taliv C F.An Efficient Finite Element Proce-dure for Analysis of High-Speed Spiral Groove GasFace Seals[J].Journal of Tribology,2001,123(1):205-210.
• [10]刘斌,蔡纪宁,张秋翔,等.螺旋槽端面干气密封的参数研究[J].北京化工大学学报,2002,29(5):56-60.
• [11]Gabriel R P.Fundamentals of Spiral Groove Non-Contacting Face Seals[J].Lubrication Engineering,1994,50(3):215-224.
• [12]丁雪兴,王悦,张伟政,等.螺旋槽干气密封润滑气膜角向涡动的稳定性分析[J].北京化工大学学报,2008,35(2):7-11.
• [13]杜兆年,丁雪兴,俞树荣,等.轴向微扰下干气密封螺旋槽润滑气膜的稳定性分析[J].润滑与密封,2006,31(10):127-130.
• [14]Wang B,Zhang HQ.Numerical Analysis of a SpiralGroove Dry-gas Seal Considering micro-scale Effects[J].Chinese Journal of Mechanical Engineering,2011,24(1):146-153.
• [15]黄义仿,丁雪兴,郑劲,等.干气密封螺旋槽内气体流场的有限元模拟[J].化工机械,2007,34(2):95-97.
• [16]丁雪兴,陈德林,张伟政,等.螺旋槽干气密封微尺度流动场的近似计算及其参数优化[J].应用力学学报,2007,24(3):425-428.
• [17]顾永泉.机械密封实用技术[M].北京:机械工业出版社,2001.
• [18]Wu S F,Clark R,Positioning of hydrodynamic lift fea-tures on non-contacting mechanical gas seal rings[J].TRIBOL TRANS,pp.498-506.
• [19]Miller B,Green I.Numerical Techniques for Compu-ting Rotordynamic Properties of Mechanical Gas FaceSeals[J].ASME Trans.,Journal of Tribology,2002,124(4):755-761.
• [20]Miller B,Green I.Semi-Analytical Dynamic Analysisof Spiral-Grooved Gas Face Seals[J].ASME Trans.Journal of Tribology,2003,125(2):403-413.
• [21]王福军.计算流体动力学分析[M].北京:清华大学出版社,2004.
• [22]杨梅,田驰,李鑫,等.压力容器泄漏事故应急决策系统研究[J].压力容器,2012,29(1):59-62.