王琴,杨连发,张震
WANG Qin,YANG Lian-fa,ZHANG Zhen(Guilin University of Electronic Technology

• 1:桂林电子科技大学

摘要(Abstract)：

水冷散热器是保证大功率电气设备正常工作的有效散热装置,其热交换过程及热膨胀变形一直是研究的热点。针对某企业一款水冷散热器的核心部分-水冷部件,应用有限元软件ANSYS建立起其单路冷却流道的模拟模型,分析流体入口流速、空气热对流对流体出口温度的影响以及水冷部件产生的热变形。研究结果表明,流体出口温度随着其流体入口流速、空气热对流系数分别呈现曲线下降、近似线性下降的趋势;水冷部件的热膨胀变形十分明显、且分布不均匀,出现了翘曲现象。
Water-cooling radiator is the effective heat dissipation device to ensure the high-power electrical equipment work properly.The heat exchanging process and thermal deformation of water-cooling radiator are always hotspots.Based on the water-cooling components which are the core of water cooling radiator of a company,the simulation model of single water-cooling flow channel was established by the finite element software ANSYS.The effects of fluid outlet temperature were investigated in the different inlet velocity and air convection situation,and thermal deformation of single water-cooling flow channel was analyzed.The results show that there is decline curve between inlet velocity and outlet temperature,and the relationship of air convection and outlet temperature is nearly linear decrease.The thermal deformation of water-cooling components is obvious,asymmetric.And the warp phenomenon will occur.

关键词(KeyWords)： 水冷散热器;温度场;热变形;数值模拟
water-cooling radiator;thermal field;thermal deformation;numerical simulation

Abstract:

Keywords:

基金项目(Foundation): 制造系统与先进制造技术广西重点实验室重大项目(09-007-05s007)

作者(Author): 王琴,杨连发,张震
WANG Qin,YANG Lian-fa,ZHANG Zhen(Guilin University of Electronic Technology

参考文献(References)：

• [1]刘瑞.板翅式-叉排式散热器综合性能分析及实验研究[D].天津:天津科技大学,2006.
• [2]孙世梅,张红.热管换热器流动与传热CFD模拟及试验[J].南京工业大学学报,2004,26(2):62-65.
• [3]周敏,吴淑泉.电子设备强迫风冷设计的计算机仿真[J].计算机工程,2003,29(9):171-172.
• [4]支淼川,刘衍平.电力电子设备水冷散热器的数值模拟[D].华北电力大学,2006
• [5]郭崇志,周洁.固定管板式换热器的温差热应力数值分析[J].化工机械,2009,36(1):41-46.
• [6]小飒工作室.最新经典ANSYS及Workbench教程[M].北京:电子工业出版社,2004:1.
• [7]许洋,党莎莎,胡仁喜,等.ANSYS 11.0/FLOTRAN流场分析实例指导教程[M].北京:机械工业出版社,2009:82.
• [8]章熙民,任泽需,梅飞鸣.传热学(第四版)[M].中国建筑工业出版杜,2001:102.
• [9]ANSYS.Realse 10.0 Documentation for ANSYS[Z].