申江,黄冰
SHEN Jiang,HUANG Bing

• 1:天津商业大学天津市制冷技术重点实验室

摘要(Abstract)：

用分布参数法建立数学模型,对CO2冷风机在高温工况下进行仿真模拟计算。分析计算了管内制冷剂侧的传热特性,以及管间距与翅片间距对换热系数和压降的影响。结果表明,由于随着干度的增加,管内CO2流型不断发生变化,管内侧换热系数和压降也随之变化。在设计冷风机时,应综合考虑翅片间距与管间距对冷风机总换热系数及空气侧压降的影响。
The numerical simulation of CO2 air cooler under high temperature condition is carried with the mathematical model constructed using distribute parameter method. The heat transfer characteristic of the refrigerant-side inside the tube is analyzed,along with the influence on heat transfer parameters and pressure drop with the change of the tube spacing and fin spacing. The results indicates that,with the increase of the dryness,the flow pattern of the CO2 inside the tube keeps changing,along with the heat transfer parameter inside the tube and the pressure drop. The influence of fin spacing and tube spacing on the total heat transfer parameter and air-side's pr-essure drop should be taken into consideration while designing the construction of the air cooler.

关键词(KeyWords)： 分布参数模型;冷风机;仿真计算
distributed parameter model;air cooler;simulation calculation

Abstract:

Keywords:

基金项目(Foundation):

作者(Author): 申江,黄冰
SHEN Jiang,HUANG Bing

参考文献(References)：

• [1]李丽霞,姬长发,赵文秀.CO2制冷系统的技术进展[J].应用能源技术,2008,(7):33-37.
• [2]杨俊兰,马一太,李敏霞.超临界CO2流体及其换热特性分析[J].流体机械,2013,41(5):73-78.
• [3]杨凤叶,刘敏珊,刘彤,等.超临界CO2微通道平行流气冷器流量分配优化研究[J].压力容器,2013,30(8):37-41.
• [4]杨凤叶,王珂,刘彤,等.竖直管内超临界二氧化碳局部对流换热研究[J].压力容器,2013,30(3):5-8.
• [5]丁国良,张春路.制冷空调装置仿真与优化[M].北京:科学出版社,2001.
• [6]Lixin Cheng,John R.Thome.New prediction methods for CO2evaporation inside tubes:Part I-A two-phase flow pattern map and a flow pattern based phenomenological model for two-phase flow frictional pressure drops[J].International Journal of Heat and Mass Transfer,2008,51:111-124.
• [7]Lixin Cheng,John R Thome.New prediction methods for CO2evaporation inside tubes:Part II-A two-phase flow pattern map and a flow pattern based phenomenological model for two-phase flow frictional pressure drops[J].International Journal of Heat and Mass Transfer,2008,51:125-135.
• [8]陈圣光.CO2热泵管翅式蒸发器的模拟优化与试验研究[D].郑州:中原工学院,2012.
• [9]袁玉玲.翅片管换热器流程布置的数值计算与优化[D].广州:华南理工大学,2011.
• [10]吴业正,韩宝琦.制冷原理及设备(第2版)[M].西安:西安交通大学出版社,1997:238-239.
• [11]范晓伟,付光轩,龚毅.二氧化碳管内流动与换热研究现状及展望[J].中原工学院学报,2003,12(3):7-10
• [12]杨亮,丁国良,黄东平,等.亚临界二氧化碳换热特性研究进展[J].制冷学报,2003,(4):28-34.
• [13]李君.翅片管式蒸发器的仿真与实验研究[D].杭州:浙江大学,2005.
• [14]黄冬平,梁贞潜,丁国良,等.基于模型的二氧化碳微通道气体冷却器性能分析[J].化工学报,2002,53(8):833-836.
• [15]范晓伟,张仙平,王凤坤,等.基于分布参数模型的CO2蒸发器结构参数研究[J].低温与超导,2008,36(8):63-69.
• [16]杨俊兰,马一太,李敏霞.CO2蒸发器的性能模拟与优化计算[J].河北工业大学学报,2011,40(3):35-39.
• [17]Yun Rin,Kim Yong chan,Park Chasik.Numerical analysis on a micro-channel evaporator designed for CO2air-conditioning systems[J].Applied Thermal Engineering,2007,27(8):1320-1326.
• [18]Yoon S H,Cho E S,Hwang Y W,et al.Characteristics of evaporative heat transfer and pressure drop of carbon dioxide and correlation development[J].International Journal of Refrigeration,2004,27:111-119.
• [19]John R Thome,Jean El Hajal.Flow boiling heat transfer to carbon dioxide:general prediction method[J].International Journal of Refrigeration,2004,27:294-301.
• [20]Cheng L,Ribatski G,Wojtan L,et al.Thome,Erratum to:New flow boiling heat transfer model and flow pattern map for carbon dioxide evaporating inside tubes[J].Heat Mass Transfer,2006,49(21-22):4082-4094.
• [21]Yun R,Kim Y,Kim M S.Flow boiling heat transfer of carbon dioxide in horizontal mini tubes[J].Int.J.Heat Fluid Flow,2005,26:801-809.
• [22]刘斌,苏芸,蔡景辉,CO2冷风机的设计优化[C].走中国创造之路——2011中国制冷学会学术年会论文集,2011.
• [23]刘斌,苏芸,董小勇,等,直接供液CO2冷风机的设计优化[J].制冷学报,2012,(6):22-25.