百叶窗形式对蒸发空冷器迎面风速的影响Impact of Shutter Forms on Head Wind under Bundle in an Evaporative Air Cooler
陈良才,蒋茂灿,江波,杨东昊,冯志力
CHEN Liang-cai,JIANG Mao-can,JIANG Bo,YANG Dong-hao,FENG Zhi-li(Huazhong University of Science and Technology
摘要(Abstract)：
用FLUENT数值模拟方法,研究了仰角进风百叶窗和俯角进风百叶窗对管束下方迎面风速分布的影响。研究结果表明,百叶窗俯角或仰角越大,管束下方气流的竖直分速越不均匀;俯仰角绝对值相同时,俯角进风的竖直分速分布较为均匀,但气流压降较大。百叶窗进风角度以15°左右为宜,此进风角度,空冷器压降小,进入管束的气流竖直分速分布较均匀,有利于发挥全部管子的换热能力。
Based on the FLUENT software,the wind speed under the tube bundle impacted by two different forms of shutters was investigated.The greater the depression angle or elevation angle of the shutter blades,the more uneven the vertical air speed distribution under the bundle.As the absolute value of depression angle equals to that of elevation angle,the vertical air speed distribution with depression angle is more uniform than that with elevation angle,but the pressure drop is bigger than the drop with elevation angle.The angle of 15° is better than others of the shutter because of smaller pressure drop and flatter profile of wind distribution favorable to play the rolls of heat exchange of all tubes.
关键词(KeyWords)：
空冷器;风速;百叶窗;CFD
air cooler;wind speed;shutter;CFD
基金项目(Foundation):
作者(Author):
陈良才,蒋茂灿,江波,杨东昊,冯志力
CHEN Liang-cai,JIANG Mao-can,JIANG Bo,YANG Dong-hao,FENG Zhi-li(Huazhong University of Science and Technology
参考文献(References)：
- [1]张亚君,黄德斌,潘朝群,等.气流横向冲刷圆壳管束的传热实验研究[J].化学工程,2006,34(11):12-15.
- [2]黄德斌,邓先和.气流横向冲刷圆壳管束换热的数值模拟[J].化学工程,2005,33(4):12-14.
- [3]黄德斌,邓先和,朱冬生,等.气流横向冲刷圆壳管束换热试验研究[J].石油化工设备,2006,35(2):1-5.
- [4]黄翔,唐广栋,朱冬生,等.来流流场对蒸发式冷凝器性能影响的研究[J].制冷学报,2006,27(4):17-22.
- [5]杜鹃,武俊梅,黄翔.直接蒸发冷却系统传热传质过程的数值模拟[J].制冷与空调,2005,5(2):28-33.
- [6]杜鹃,黄翔,武俊梅.直接蒸发冷却空调机与冷却塔内部传热、传质过程的类比分析[J].制冷与空调,2003,3(1):11-14
- [7]李安军,邢桂菊,周丽雯.表面蒸发式空冷器在冶金行业中的应用[J].节能,2007,(11):47-49
- [8]Benhamadouche S,Laurence D.LES,coarse LES,andtransient RANS comparisons on the flow across a tubebundle[J].International Journal of Heat and FluidFlow,2003,24(4):470-479
- [9]Watterson J K,Dawea W N,Savill A M,White A J.Predicting turbulent flow in a staggered tube bundle[J].International Journal of Heat and Fluid Flow,1999,20(6):581-591