蒙晨,杨帅,武鹏,吴大转
MENG Chen,YANG Shuai,WU Peng,WU Da-zhuan

• 1:浙江大学

摘要(Abstract)：

对增压泵组变压节能供水模式的实现方式和控制逻辑进行了理论分析和试验验证。构建一种以PLC和变频器相结合的控制系统,建立变压控制泵组的节能控制模型,包括管网系统用水需求预测模型、变压控制模型以及能效判据为主导的增减泵控制模型等,进而实现增压泵组的变压控制和节能运行。试验结果表明,控制模型的用水需求预测准确性可达90%以上,且敏感性较高;能效优化方案可有效改善泵组控制效果并能提高泵组能效。研究结果可为增压泵组节能运行及变压控制系统的设计提供参考。
This paper is aimed at the realization method and control logic of variable-pressure and energy-saving water supply strategy for parallel pumps by theoretical and experimental research. The PLC, combined with frequency converters, has been used as control-system of the new control strategy. In addition, the intelligent variable-pressure control was realized by modeling water demand estimation for piping system, variable-pressure control and the pump increased or decreased control, based on energyefficiency condition. Suggested by the experiment results, the water demand estimation model is reliable with high sensibility and accuracy up to 90%. Besides, the control effect and energy-efficiency of pumps are improved effectively owing to the optimization control strategy. The obtained results can be referred by both the energy-saving optimization of parallel pumping system and the development of variable-pressure water supply mode.

关键词(KeyWords)： 增压泵组;变压供水;节能优化;性能预测;控制模型
parallel pumping system;variable-pressure water supply;energy-saving optimization;performance estimation;control model

Abstract:

Keywords:

基金项目(Foundation): 中国博士后科学基金项目(2016M601939)

作者(Author): 蒙晨,杨帅,武鹏,吴大转
MENG Chen,YANG Shuai,WU Peng,WU Da-zhuan

参考文献(References)：

• [1]Ahonen T,Tamminen J,Ahola J,et al.Estimation of pump operational state with model-based methods[J].Energy Conversion and Management,2010,51(6):1319-1325.
• [2]Kaya D,Yagmur E A,Yigit K S,et al.Energy efficiency in pumps[J].Energy Conversion and Management,2008,49(6):1662-1673.
• [3]王乐勤,王循明.离心泵变频调速变压供水系统设计模型及求解[J].流体机械,2003,31(9):15-17.
• [4]Hammo S,Viholainen J.Testing the accuracy of pump flow calculation without metering[J].World Pumps,2005(471):36-39.
• [5]李斌,罗富强,陈炜.管网叠压(无负压)供水系统水泵能耗对比研究[J].给水排水,2010(3):156-159.
• [6]董兵,谭炳勋.变频变压供水系统设计与研究[J].广东轻工职业技术学院学报,2011(3):10-13.
• [7]汤跃,张新鹏,黄志攀,等.离心泵变压供水系统控制模型辨识的试验研究[J].农业工程学报,2012,28(7):189-193.
• [8]Hammo S,Viholainen J.Providing flow measurement in parallel pumping systems from variable speed drives[J].World Pumps,2006(483):30-33.
• [9]Viholainen J,Tamminen J,Ahonen T,et al.Energyefficient control strategy for variable speed-driven parallel pumping systems[J].Energy Efficiency,2013,6(3):495-509.
• [10]魏道联,魏乐安.末端控制分时变压变量供水技术[J].中国给水排水,2009(10):87-89.
• [11]邱寿华,刘德明,陈犀喆,等.变频供水系统两种常用压力控制点能耗比较[J].福建建筑,2010(8):98-100.
• [12]武荣,葛晓霞.变频调速供水在消防给水应用中有关问题的探讨[J].消防技术与产品信息,2005(6):23-26.
• [13]田宇光.变频技术和PLC技术在恒压供水系统中的应用研究[J].科技创新导报,2013(5):61.
• [14]武鹏.并联泵组高效高可靠性运行问题研究[D].杭州:浙江大学,2013:36-37.
• [15]刘力歌,冯文卓,高欢,等.一种新型网壳储罐的支座结构及其优化[J].压力容器,2016,33(2):30-34.
• [16]陆怡,孙志冬,张琪.LNG车用气瓶颈管结构参数优化[J].压力容器,2016,33(7):32-41.
• [17]叶云清.变频器调频范围的确定及运行模式的探讨[J].给水排水,2011(S1):452-454.