包彬彬,张赟新,马增辉,江志农,张进杰
BAO Bin-bin,ZHANG Lai-xin,MA Zeng-hui,JIANG Zhi-nong,ZHANG Jin-jie

• 1:高端机械装备健康监控与自愈化北京市重点实验室北京化工大学
• 2:中国石油新疆油田分公司采油一厂

摘要(Abstract)：

基于局部行程压开进气阀的往复压缩机无级气量调节系统采用液压系统驱动机械执行机构控制吸气阀的开启时间实现气量调节。本文通过建立气量调节工况下往复压缩机工作循环的数学模型与吸气阀阀片运动的数学模型,模拟了不同负荷下气缸内动态压力,分析执行机构外力瞬间撤销下吸气阀阀片自由关闭时的运动规律;利用AMESim软件对复位弹簧在不同的弹簧刚度下执行机构运动规律进行研究;通过实验与仿真结果对比分析,确定了气量调节工况下吸气阀运动规律和气量调节工况下缸体振动冲击的来源;为往复压缩机无级气量调节系统的研发和气量调节工况下往复压缩机吸气阀故障诊断提供理论依据。
Reciprocating compressor stepless capacity control system adopted the hydraulic system to drive the mechanical actuator to control the opening time of the suction valve. The mathematical model of the working cycle of reciprocating compressor under capacity control is established,and the dynamic pressure of the cylinder under different loads is simulated. The motion law of the free closing of the suction valve is analyzed. Used AMESim software to study the motion law of the actuator under different spring stiffness. Obtained the motion law of the suction valve under capacity control system,and the source of the cylinder vibration shock by the experimental and simulation results. Provided theory evidence for the research of Stepless Capacity Control and the fault diagnosis of reciprocating compressor suction valve.

关键词(KeyWords)： 吸气阀;AMESim;执行机构;撞击速度;弹簧刚度
suction valve;AMESim;actuator;impact velocity;spring stiffness

Abstract:

Keywords:

基金项目(Foundation): 863项目(2014AA041806);; 973项目(2012CB026000);; 中央高校基本科研业务费专项资金资助项目(JD1506)

作者(Author): 包彬彬,张赟新,马增辉,江志农,张进杰
BAO Bin-bin,ZHANG Lai-xin,MA Zeng-hui,JIANG Zhi-nong,ZHANG Jin-jie

参考文献(References)：

• [1]梁涌.往复压缩机气量无级调节系统的原理及应用[J].压缩机技术,2007(3):13-17.
• [2]王智,韩高喜.Hydro COM无级调量系统在齐鲁炼厂的应用[J].中外能源,2011,16(12):78-82.
• [3]Hong W,Jin J,Wu R,et al.Theoretical analysis and realization of stepless capacity regulation for reciprocating compressors[J].ARCHIVE Proceedings of the Institution of Mechanical Engineers Part E Journal of Process Mecha-nical Engineering 1989-1996,2009,223(4):205-213.
• [4]Jin J,Hong W.Valve Dynamic and Thermal Cycle Model in Stepless Capacity Regulation for Reciprocating Compressor[J].Chinese Journal of Mechanical Engineering,2012,25(6):1151-1160.
• [5]刘广彬,李群友,岑奇顺,等.往复压缩机气量调节系统气阀瞬态特性的研究[J].流体机械,2015,43(7):47-50.
• [6]唐斌,李连生,王乐.往复式压缩机气量无级调节过程中进气阀的动态研究[J].机械工程学报,2011(4):136-141.
• [7]Tang B,Zhao Y Y,Li L S,et al.Dynamic characteristics of suction valves for reciprocating compressor with st-epless capacity control system[J].Proceedings of the instit-ution of mechanical engineers part E-Journal of process mechanical engineering,2014,228(2):104-114.
• [8]吴业正.往复式压缩机数学模型及应用[M].西安:西安交通大学出版社,1989.
• [9]江志农,王辰,冯坤.高压往复压缩机管道振动测试分析与应用[J].流体机械,2015,43(12):6-10.
• [10]纪克鹏,唐辰,吴志荣,等.插板阀在振动给料机给料精度控制中的应用[J].包装与食品机械,2015,33(6):63-66.
• [11]付永领,祁晓野.LMS l Magine.Lab AMESim系统建模和仿真参考手册[M].北京:北京航空航天大学出版社,2011.