褚双磊,俞国胜,秦瑞鸿
CHU Shuang-lei,YU Guo-sheng,QIN Rui-hong(School of Technology

• 1:北京林业大学工学院

摘要(Abstract)：

应用计算流体动力学的方法对轴流式灭火风机内的三维湍流流动进行了建模和基于N-S方程的仿真分析,仿真采用有限体积法FVM和k-ε双方程模型来模拟湍流流动,得到了轴流式灭火风机在设计工况下的内部流场三维流动形态,分析了轴流式灭火风机内部的气流流动规律、流速和压力分布,以三维湍流场的仿真结果为依据,对轴流式灭火风机的内部风道进行了有效的改进和优化设计。结果表明锥形射流风筒采用整流栅板可以有效地提高出口风速,改善内部流动,更好地满足设计要求。
The modeling and simulation analyse based on the N-S equation in the three-dimensional turbulent flow of axial-flow fire-fighting fan have been completed by using the method of computational fluid dynamics(CFD).k-ε two-way model was used to simulate the turbulent flow based on the finite volume method.The three-dimensional flow pattern of the internal flow field under the design operating conditions of the axial-flow fire-fighting fan was concluded.The flow characteristics,the airflow velocity and the pressure distribution of axial-flow fire-fighting fan was analyzed.The effective improvement and optimum aerodynamic design of the internal wind duct has been realized based on CFD flow field simulation.The results show that cone-shaped jet duct with grid plate can effectively increase outlet velocity,improve internal flow,and better meet the design requirements.

关键词(KeyWords)： 轴流式灭火风机;计算流体动力学;仿真;优化设计
axial-flow fire-fighting fan;computational fluid dynamics(CFD);simulation;optimum design

Abstract:

Keywords:

基金项目(Foundation): 国家林业局森林防火指挥部办公室“轴流式风力灭火机研究”课题资助

作者(Author): 褚双磊,俞国胜,秦瑞鸿
CHU Shuang-lei,YU Guo-sheng,QIN Rui-hong(School of Technology

参考文献(References)：

• [1]褚双磊,俞国胜.轴流式风力灭火机的研究初探[J].林业机械与木工设备,2007,35(4):24-26.
• [2]任晓栋,顾春伟.1.5级跨音速压气机内部流场数值分析[J].工程热物理学报,2009,30(9):1472-1474.
• [3]阳志钦,崔文篆.垂直轴风力机二维非定常流场数值模拟[J].现代制造工程,2009,(8):56-58,77.
• [4]李宇红,张庆麟.风力机叶片三维流动特性与气动性能的数值分析[J]太阳能学报,2008,29(09):1172-1176.
• [5]李剑波,吴克启.空调风扇数值模拟及流道结构的优化[J].流体机械,2006,34(9):21-23,34.
• [6]傅泽田,王俊,祁力钧,等.果园风送式喷雾机气流速度场模拟及试验验证[J].农业工程学报,2009,25(1):69-74.
• [7]袁凤东,由世俊,高立江.基于CFD的地铁用轴流风机性能模拟[J].流体机械,2006,34(5):26-30.
• [8]张辉,杨爱玲,陈康民,等.动叶前掠角与小型轴流风扇气动性能的关系[J].动力工程,2009,29(8):669-772,793.
• [9]梅宁,司洪宇.复合式叶轮风机性能数值模拟研究[J].热科学与技术,2008,7(4):354-359.
• [10]徐燕飞,席德科,田彬,等.风力机设计与数值模拟分析[J].机械设计与制造,2006,(07):18-20.
• [11]Petrov N N,Popov N A,Russkii E Yu.Scientific sub-stantiation and development of a new series of axialfans[J].Journal of Mining Science,2007,43(3):300-310.