钟功祥;雷鹏燕;祝令闯;
Zhong Gongxiang;Lei Pengyan;Zhu Lingchuang;MOE Key Laboratory of Oil&Gas Equipment,South West Petroleum University;

• 1:西南石油大学石油天然气装备教育部重点实验室

摘要(Abstract)：

我国的稠油资源丰富,如何有效地开采稠油资源逐步成为人们的探究重点。目前,由于对热采环境优异的适应性,全金属螺杆泵在稠油开采中得到广泛应用。针对现阶段全金属单螺杆泵普遍效率低的问题,提出了基于CFD的优化策略。运用三维动网格技术对螺杆泵内部流场进行有限元建模;利用试验数据验证了该模型的正确性;基于该模型针对泵的间隙值,偏心距以及定子导程3个主要结构参数对油泵性能的影响规律进行分析并得到了这些参数对排量、漏失量、容积效率、泵效的相关影响规律;利用这些规律对该螺杆泵结构进行优化,使全金属单螺杆泵的系统效率约提升约30%。
China is rich in heavy oil resources.How to effectively exploit these heavy oil resources has gradually become the focus of exploration.At present,metallic progressing cavity oil pump has been widely used in heavy oil production due to its excellent adaptability to high temperature environment.For the problem of generally low efficiency of metallic progressing cavity oil pump at present,the optimization strategy based on CFD was put forward.The finite element model of internal flow field of metallic progressing cavity oil pump was established using three-dimensional dynamic mesh technology.The correctness of the model was verified by experimental data.Based on the model,the influence of such three main structural parameters as clearance,eccentricity and stator lead on the performance of the pump was analyzed,and the relevant influence laws of these parameters on displacement,leakage,volume efficiency and pump efficiency were obtained.By using these influence laws,the structure of the metallic progressing cavity oil pump was optimized,making the system efficiency of metallic progressing cavity oil pump improved by about 30%.

关键词(KeyWords)： 全金属单螺杆泵;CG宏;动网格;优化
metallic progressing cavity oil pump;CG macro;dynamic mesh;optimization

Abstract:

Keywords:

基金项目(Foundation): 省部共建“石油天然气装备”教育部重点实验室(西南石油大学)资助项目(2017sts03)

作者(Authors): 钟功祥;雷鹏燕;祝令闯;
Zhong Gongxiang;Lei Pengyan;Zhu Lingchuang;MOE Key Laboratory of Oil&Gas Equipment,South West Petroleum University;

参考文献(References)：

• [1] 张凤久,姜伟,孙福街,等.海上稠油聚合物驱关键技术研究与矿场试验[J].中国工程科学,2011,13(5):28-33.
• [2] 钱兴坤,姜学峰,戴家权,等.“十三五”期间全球油气行业发展十大趋势[J].国际石油经济,2015,23(1):44-50.
• [3] 陈家庆.海洋油气开发中的水下生产系统(一)[J].石油机械,2007,35(5):54-58.
• [4] 陈家庆.海洋油气开发中的水下生产系统(二)[J].石油机械,2007,35(9):150-156.
• [5] 曹刚,刘合,黄有泉,等.国外螺杆泵举升工艺的新进展[J].石油机械,2004,32(3):12-12.
• [6] 石磊.单螺杆泵运动学仿真及转子动力特性研究[D].青岛:中国石油大学(华东),2008.
• [7] 钟功祥,祝令闯,张兴,等.SCT型单螺杆泵采用Mooney-Rivlin模型的有限元分析[J].机械设计与制造,2017(5):85-88.
• [8] 魏纪德,吴文祥,曾艳.螺杆泵定子橡胶溶胀对容积效率的影响及对策[J].石油机械,2005,33(4):16-18.
• [9] 祝效华,迟博.螺杆钻具定转子热力耦合行为[J].石油学报,2016,37(8):1047-1052.
• [10] 黄思,康文明,邱光琦,等.基于CFD的全金属单螺杆泵非稳态流场计算及性能预测[J].排灌机械工程学报,2018,36(12):1211-1215.
• [11] 周颖,郑源,何中伟,等.大型轴流泵反向发电压力脉动及流固耦合[J].排灌机械工程学报,2019,37(6):480-485.
• [12] 陶然,肖若富,杨魏.基于遗传算法的轴流泵优化设计[J].排灌机械工程学报,2018,36(7):573-579.
• [13] 姜东,石彦,薛建泉,等.螺杆泵内部滑失与泵外漏失机理研究[J].石油钻采工艺,2013(4):73-77.
• [14] Beauquin J L,Boireau C,Lemay L,et al.Development status of a metal progressing cavity pump for heavy oil and hot production wells[R].SPE,97796,2006.
• [15] Martin A M,Kenyery F,Tremante A.Experimental study of two phase pumping in progressive cavity pumps[C]// Latin American & Caribbean Petroleum Engineering Conference.Society of Petroleum Engineers,1999.
• [16] Gamboa Jose,Olivet Aurelio,Espin Sorelys.New approach for modeling progressive cavity pumps performance[C]// SPE Annual Technical Conference and Exhibition,2003.
• [17] Paladino E,Joao A D L,Almeida R,et al.Computational modeling of the three-dimensional flow in a metallic stator progressing cavity pump[C]// Society of Petroleum Engineers,2008.
• [18] Chen J,Liu H,Wang F,et al.Numerical prediction on volumetric efficiency of progressive cavity pump with fluid-solid interaction model[J].Journal of Petroleum Science & Engineering,2013,109(9):12-17.
• [19] 郑磊,吴晓东,韩国庆,等.全金属螺杆泵间隙漏失模型[J].石油科学通报,2018(3):320-331.