基于空化模型的多级离心泵汽蚀性能分析Analysis on Cavitation Performance in Multi-stage Centrifugal Pump Based on Cavitation Model
黄思,管俊
HUANG Si,GUAN Jun(South China University of Technology
摘要(Abstract)：
应用Rayle igh-P lesset气泡方程建立离心泵空化模型,并与气液两相湍流控制方程耦合求解,得到了多级离心泵内三维湍流场及气液相分布,捕捉到气泡的初生、发展及冷凝过程。计算了不同流量下的离心泵的必需汽蚀余量并与实测结果进行了对比分析。
A cavitation analysis model for centrifugal pump is developed based on the Rayleigh-Plesset bubble equation.The 3-D turbulent flow field and gas-liquid phase distribution in a multi-stage centrifugal pump are computed by solving the bubble equation coupled with two-phase turbulent governing equations.The process of bubble vaporization,growing and condensation are simulated and visualized.The cavitation model and simulation are validated by comparing numerical solutions with tested curve of Q-NPSHr for the pump.
关键词(KeyWords)：
多级离心泵;空化模型;汽蚀性能;模拟计算
multi-stage centrifugal pump;cavitation model;cavitation performance;numerical simulation
基金项目(Foundation):
作者(Author):
黄思,管俊
HUANG Si,GUAN Jun(South China University of Technology
参考文献(References)：
- [1]张本新.离心泵的汽蚀现象[J].化学工程与装备,2009,6:42-43.
- [2]Singhal A K,Athavale M M,Li H Y,et al.Mathe-matical Basis And Validation of The Full CavitationModel[J].ASME Journal of Fluids Engineering,2002,124(9):617-624.
- [3]刘宜,赵希枫,齐学义,等.离心泵内部流场的三维空化湍流的数值计算[J].兰州理工大学学报,2009,35(1):50-53.
- [4]李军,刘立军,李国君,等.离心泵叶轮内空化流动的数值预测[J].工程热物理学报,2007,28(6):948-950.
- [5]Bakir F,Rey R,Gerber A G,et al.Numerical and Ex-perimental Investigations of The Cavitating Behavior ofAn Inducer[J].Int J Rotating Machinery,2004,10:15-25.