某冶炼风机出口管路系统的优化改造Optimal Reforming to Export Pipeline System of a Smelting Fan
许万国;
XU Wan-guo;Maanshan Iron & Steel Co. Ltd.;
摘要(Abstract)：
某冶炼厂风机在使用过程中,一直存在着风量不够、压力偏高从而制约产能的问题,经分析发现是由风机出口管路设计不合理、系统附加阻力过大所致。本文对风机出口管路进行优化,并对优化前后的风机出口管路系统进行CFD流场模拟,计算表明,优化后风机的出口阻力损失明显减小。管路根据优化结果进行现场改造后,风机使用状况良好,完全满足系统工艺设计要求。
There had been problems of insufficient flow and higher air pressure of a smelting fan in using process,which was caused by unreasonable design of the fan export pipeline in analysis. Flow field of the optimized fan system and the fan system with original export pipeline were both calculated by CFD. The results showed that outlet resistance loss of the optimized fan system decreased obviously. After export pipeline was modified according to the result of optimization,the smelting fan has been in good use,and fully met the requirements of system process design.
关键词(KeyWords)：
冶炼风机;管路系统;附加阻力;优化;CFD模拟
smelting fan;pipeline system;added resistance;optimization;CFD simulation
基金项目(Foundation):
作者(Author):
许万国;
XU Wan-guo;Maanshan Iron & Steel Co. Ltd.;
Email:
DOI:
参考文献(References)：
- [1]AMCA,Improving Fan System Performance[Z].April2003.
- [2]朱晓农.通风系统的系统效应与系统节能[J].通用机械,2009,(8):28-29.
- [3]续魁昌.风机手册[M].北京:机械工业出版社,1999:99-102,576-619.
- [4]靳遵龙,李水云,雷珮云,等.矩形微道道内单相液体湍流对流流动与换热数值研究[J].压力容器,2013,30(5):7-12,69.
- [5]郭娟,王汉青.基于Fluent的多元通风系统数值模拟分析[J].流体机械,2013,41(5):29-33.
- [6]刘泽勤,苏云,郭宪民.风机盈管来流场均匀化数值模拟[J].流体机械,2013,41(4):54-57.
- [7]王福军.计算流体动力学分析-CFD软件原理与应用[M].北京:清华大学出版社,2004,191-234.