杨启超,李连生,赵远扬,束鹏程
YANG Qi-chao,Li Lian-sheng,ZHAO Yuan-yang,SHU Peng-cheng(Xi'an Jiaotong University

• 1:西安交通大学
• 2:西安交通大学
• 3:西安交通大学
• 4:西安交通大学 陕西西安710049

摘要(Abstract)：

对喷水涡旋空压机高速运行时动静盘之间发生碰磨现象的原因进行了分析。分析结果指出加工精度、涡盘变形,润滑方式和材料共同作用下的动静涡盘之间的密封间隙的不均衡性,特别是局部啮合间隙过小是造成此现象的直接原因,提出了对间隙合理控制的有效措施,并在此基础之上指出了喷水涡旋空压机发展的关键技术。
The reasons that lead to the contact rubbing of water-injection scroll air compressor during its high speed operation were analyzed.The non-uniform clearance,especially the too small clearance between orbiting scroll and fixed scroll under the action of machining accuracy,scroll plates deformations,lubrication method and material was the direct reason for these phenomena.Several effective methods were proposed to control clearance and some key technologies for water-injection scroll air compressor future development were presented based on the analysis.

关键词(KeyWords)： 涡旋空压机;碰磨;间隙;关键技术
scroll air compressor;contact rubbing;clearance;key technologies

Abstract:

Keywords:

基金项目(Foundation): 国家自然科学基金项目(50476054)

作者(Author): 杨启超,李连生,赵远扬,束鹏程
YANG Qi-chao,Li Lian-sheng,ZHAO Yuan-yang,SHU Peng-cheng(Xi'an Jiaotong University

参考文献(References)：

• [1]司玉宝.涡旋式空气压缩机动力特性及涡盘变形的研究[D].西安:西安交通大学,2002.
• [2]李连生.涡旋压缩机[M].北京:机械工业出版社,1998.205-206.
• [3]Zhao Yuanyang,Li Liansheng,Yang Qichao,et al.Re-search on heat and force deformations of large deliveryscroll air compressor[A].Proceedings of the 5th Inter-national Conference on Compressor and Refrigeration[C].Dalian,2005.249-255.
• [4]赵远扬.燃料电池供气系统用涡旋压缩机/膨胀机理论及实验研究[D].西安:西安交通大学,2005.
• [5]冯健美,屈宗长.涡旋压缩机的发展优势和关键技术[J].中国机械工程,2002,13(19):1706-1709.
• [6]Ancel C,Ginies P,Gross D.Design of large scrollcompressor[A].International Conference on Compres-sor andtheir Systems[C].London,2005.119-129.