孙晓锋;邵泽波;贺业荣;姜德龙;
SUN Xiao-feng1,SHAO Ze-bo1,HE Ye-rong2,JANG De-long1 (1.Jilin Institute of Chemical Technology,Jilin 132000,China;2.PetroChina Northeast Refining &Chemical Engineering Co.Ltd.,Jilin Machinery Manufacture Branch,Jilin 132022,China)

• 1:吉林化工学院
• 2:中石油东北炼化工程有限公司吉林机械制造分公司

摘要(Abstract)：

为优化单腔双振子压电泵的结构,提高输出性能,设计了一种新型结构的单腔双振子压电泵。将新设计结构同前期设计结构进行了比较,并对两种结构的试验样机进行了输出流量测试。试验显示,新结构的输出流量是前期结构输出流量的2倍,最大流量可达800mL/min。将新结构加工了不同腔体初始容积样机,得到了压缩比对泵输出性能的影响。试验发现,当腔体高度为1.2mm,工作时的压缩比为1/46,此时单腔双振子压电泵整体输出效果最好。分析了单腔双振子压电输送液体和气体时工作特点,得到泵输送液体介质时最佳工作频率点远远低于输送气体介质。
In order to optimize the structure of single-chambered piezoelectric pump with double actuators to improve the output performance,and design a new structure of it.The structure of the new design with pre-designed structure compared to experimental prototype output flow-rate test of the two structures.The trials have shown that the new structure of the output flow rate is 2 times the pre-structure the output flow rate,maximum flow rate of up to 800mL/min.The new structure pump of different initial chamber volume were designed and manufactured,Compression ratio on pump output performance was obtained.The study found that when the chamber height is 1.2mm,compression ratio of 1/46,then the overall output effect of pump is best.The working characteristics of single-chambered piezoelectric pump with double actuators conveying the liquid and the gas were analyzed,it shows that when pumping the liquid medium the best working frequency is much lower than the gas medium.

关键词(KeyWords)： 压电泵;单腔;双振子;压缩比
piezoelectric pump;single-chambered;double-actuaor;compression ratio

Abstract:

Keywords:

基金项目(Foundation): 国家“863”高技术研究发展计划基金资助项目(2007AA04Z336);; 吉林省教育厅“十二五”科学技术研究项目(2012286);; 吉林市科技发展计划资助项目(201112208)

作者(Author): 孙晓锋;邵泽波;贺业荣;姜德龙;
SUN Xiao-feng1,SHAO Ze-bo1,HE Ye-rong2,JANG De-long1 (1.Jilin Institute of Chemical Technology,Jilin 132000,China;2.PetroChina Northeast Refining &Chemical Engineering Co.Ltd.,Jilin Machinery Manufacture Branch,Jilin 132022,China)

Email:

DOI:

参考文献(References)：

• [1]Laser D J,Santiago J G.A review of micropumps[J].Journal of Micromechanics and Microengineering,2004,14(6):35-64.
• [2]郑炜,董景石,于洪洋,等.单振子气体压电泵研究[J].农业机械学报,2012,43(2):226-229.
• [3]Anis Y,Houkal J,Holl M,et al.Diaphragm Pico-literPump for Single-cell Manipulation[J].Biomedical Mi-crodevices,2011,13(4):651-659.
• [4]Geipel A,Goldschmidtboing F,Doll A,et al.An Im-plantable Active Microport Based on A Self-primingHigh-performance Two-stage Micropump[J].Sensorsand Actuators,2008,145-146(1-2):414-422.
• [5]Ma H K,Huang S H,Chen B R,et al.Numerical Studyof A Novel Micro-diaphragm Flow Channel with Piezoe-lectric Device for Proton Exchange Membrane FuelCells[J].Journal of Power Sources,2008,180(1):402-409.
• [6]Wiederkehr R S,Salvadori M C,Brugger J,et al.TheGas Flow Rate Increase Obtained by An Oscillating Pi-ezoelectric Actuator On A Micronozzle[J].Sensors andActuators A:Physical.2008,144(1):154-160.
• [7]姜德龙,程光明,孙晓锋,等.输送流体双腔并联压电泵性能分析与试验研究[J].西安交通大学学报,2010,44(3):82-85.
• [8]孙晓锋,杨志刚,姜德龙.两种双腔串联压电泵结构设计与性能比较[J].排灌机械工程学报,2011,29(1):31-34.
• [9]刘厚林,刘东喜,王勇,等.泵空化流数值计算研究现状及展望[J].流体机械,2011,39(9):45-51.
• [10]肖根福,刘国平,王俊亭,等.无油涡旋空气压缩机过程研究[J].流体机械,2011,39(5):57-60.
• [11]高俊峰,邓杰章,王文灿,等.减底渣油泵P-17/1出口弯头爆管失效分析[J].压力容器,2010,27(10):39,50-53.