喻峰,杨敏官,蔡纪鹤,王育立
YU Feng,YANG Min-guan,CAI Ji-he,WANG Yu-li(Jiangsu University

• 1:江苏大学

摘要(Abstract)：

超高压系统中压力波动的存在,严重影响了"水刀"的切割质量,降低了系统零部件的使用寿命。本文基于单增压器系统压力波动的研究,分析了双增压器系统中的压力波动,并通过MATLAB中的动态仿真工具软件包SIMULINK对其进行仿真。由仿真图可以看出,双增压器超高压系统中的压力波动不但与工作压力、增压比、蓄能器容积、换向时间有关,两增压器之间的延迟时间也是其重要的影响因素。通过对双增压器系统压力波动的分析,为以后双增压器超高压系统的改进设计提供了参考。
Fluctuation of pressure affect the quality of the water jet cutting and impair the running life of accessories.The fluctuation of pressure in the super-high pressure system with two intensifiers are researched based on the results of the super-high pressure system with single intensifier and the model is simulated by the dynamic simulation tool SIMULINK software package of MATLAB.The illustrations reveal that the fluctuation of pressure relate with working pressure、the ratio of water pressure and oil pressure、attenuator、time of commutated and the delay time.The simulation results are available for other research of two intensifiers system.

关键词(KeyWords)： 增压器特性;压力波动;动态仿真
characteristic of the intensifier;pressure fluctuation;simulation

Abstract:

Keywords:

基金项目(Foundation):

作者(Author): 喻峰,杨敏官,蔡纪鹤,王育立
YU Feng,YANG Min-guan,CAI Ji-he,WANG Yu-li(Jiangsu University

参考文献(References)：

• [1]魏欣.基于相位式增压器的磨料水射流切割机及切割模型的研究[D].南京理工大学,2002.
• [2]Hoogstrate A M,Susuzlu T,Karpuschewski B.HighPerformance Cutting with Abrasive Waterjets beyond400MPa[J].Annal of the CIRP,2006,(1):55.
• [3]孔庆忠,房彦伟,毕俊喜.超高压水射流发生器压力分析[A].第一届全国流体动力及控制工程学术会议论文集(第二卷)[C].2000.159.
• [4]侯健,韩育礼.超高压磨料水射流切割系统试验研究[J].兵工学报,2000,21(3):253-256.
• [5]雷玉勇,宋清俊,杨桂林.基于SIMULINK的水射流动态特性仿真[J].机床与液压,2007,35(4):125-128.