赵新学;金有海;孟玉青;孙治谦;
ZHAO Xin-xue1,JIN You-hai1,MENG Yu-qing2,SUN Zhi-qian1 (1.China University of Petroleum;Dongying 257061,China;2.The Second Combined Workshop of Petrochina Dagang Petrochemical Company,Tianjin 300280,China)

• 1:中国石油大学(华东)
• 2:中石油大港石化公司第二联合车间

摘要(Abstract)：

为了分析旋风分离器壁面磨损问题,基于计算流体力学的方法,应用Fluent软件中的雷诺应力模型(气相)和离散相模型(固相),通过对旋风分离器内气固两相流场的耦合计算,对分离器流场中颗粒浓度分布和气固两相流场对壁面的磨损进行了数值模拟,并对计算结果和磨损原因进行了分析。结果表明:数值计算能够定性的预测旋风分离器壁面的磨损情况,能得出壁面磨损的主要部位即入口区域、锥体下部、灰斗以及料腿的上部等,同时也得出了壁面磨损的分布云图,这些对旋风分离器的设计、壁面磨损的分析和防磨措施的提出具有一定的参考价值。
In order to analysis the erosion problem of cyclone separator,basing on the methods of computational fluid dynamics,applying the Reynolds Stress Model(Gas phase) and Discrete Phase Model(solid phase) in Fluent,through the coupling calculating the flow field of gas and solid two phases,complete the numerical simulation of the particles concentration distribution in the flow field and the erosion of the cyclone separator's wall.At the same time,we analyze the calculation results and the reasons of the surface wall's erosion.The results show that numerical computation can qualitative predicts the erosion of cyclone separator's surface wall.It could be obtain the main position of erosion.These positions are the inlet of cyclone separator,the bottom of cone and the upper of dust hopper and dipleg.By this way can be gain the distribution contours of the wall's erosion.The above research provides reference for designing,analyzing wear problem and suggesting preventive measures about the cyclone separator.

关键词(KeyWords)： 旋风分离器;磨损;离散相;数值分析
cyclone separator;erosion;discrete phase;numerical analysis

Abstract:

Keywords:

基金项目(Foundation):

作者(Authors): 赵新学;金有海;孟玉青;孙治谦;
ZHAO Xin-xue1,JIN You-hai1,MENG Yu-qing2,SUN Zhi-qian1 (1.China University of Petroleum;Dongying 257061,China;2.The Second Combined Workshop of Petrochina Dagang Petrochemical Company,Tianjin 300280,China)

参考文献(References)：

• [1]王薇,焦清介.旋风除尘器灰环磨损与锥体角度关系的研究[J].安全与环境学报,2004,4(3):11-14.
• [2]赵水星,程学稳.循环流化床锅炉旋风分离器磨损的原因及对策[J].中国井矿盐,2006,37(6):43-45.
• [3]魏耀东,刘仁桓,燕辉,等.蜗壳式旋风分离器的磨损实验和分析[J].化工机械,2001,28(2):71-75.
• [4]沈恒根,刁永发,丁士发,等.燃煤电厂锅炉除尘用旋风分离器磨损因素的分析[J].通风除尘,1998,(2):33-36.
• [5]王宏伟,王建军,金有海.导叶式旋风管入口环形空间内气相流场数值模拟[J].石油化工设备,2006,(2):4-6.
• [6]Fluent user′s guild.Fluent Inc[R].Lebanon,USA,2005.
• [7]赵立新,朱宝军,张勇.基于离散相模型的双锥型水力旋流器磨蚀分析[J].化工机械,2007,34(6):317-320.
• [8]T.J.Olson,R.Van Ommen.Optimizing hydrocy-clone design using advanced CFD model[J].Miner-als Engineering,2004,17:713-720.
• [9]Xue Xiao-hu,Sun Guo-gang,Wan Gu-jun.NumericalSimulation of Particle Concentration in a Gas CycloneSeparator[J].Petroleum Science,2007,4(3):76-83.
• [10]宋健斐,魏耀东,时铭显.旋风分离器内颗粒浓度场的数值模拟[J].中国石油大学学报(自然科学版),2008,32(1):90-94,104.
• [11]万古军,孙国刚,薛晓虎,等.旋风分离器内颗粒质量浓度分布数值模拟[J].化学工程,2008,36(10):41-44,51.
• [12]谢建民,洪秉铃,张志军,等.旋风分离器磨损与防磨措施的研究[J].工业安全与环保,2005,31(1):36-37.
• [13]A.C.霍夫曼,L.E.斯坦因.旋风分离器—原理、设计和工程应用[M].彭维明,姬忠礼译.北京:化学工业出版社,2004.