双吸离心通风机流场数值研究Numerical Research on a Double Suction Centrifugal Fan
毛义军;汤宏涛;
MAO Yi-jun;TANG Hong-tao;Xi'an Jiaotong University;
摘要(Abstract):
针对某双吸离心通风机,生产企业为节约成本,对风机轴向尺寸、进气室和蜗壳形线等结构参数进行了重新设计。为验证改进方案是否对风机气动性能产生较大影响,本文对原型风机和改进后风机的流场进行数值模拟,并在此基础上分析了相关流动特征及外特性之间的关联性。研究结果表明改进后的风机气动性能大幅下降,流场细节的对比分析发现进气室和蜗壳的改进对风机性能的负面影响最大。最后对风机气动性能的后续改进提出建议。
The structural parameters of a double suction centrifugal fan are re-designed in the consideration of reducing production cost. To understand the effects of structure improvement on the fan aerodynamic performance,a research is carried out using computational fluid dynamics method. The numerical analysis of the two fan models implies that the newly designed fan is inferior to the original one in the aspect of aerodynamic performance,and the detailed flow field shows the inlet chamber and volute are responsible for the decrease of performance. Finally,some guidance on the improvement of fan aerodynamic performance is proposed.
关键词(KeyWords):
离心通风机;三维流场;数值模拟;计算流体力学
centrifugal fan;three-dimensional flow field;numerical simulation;computational fluid dynamics
基金项目(Foundation):
作者(Authors):
毛义军;汤宏涛;
MAO Yi-jun;TANG Hong-tao;Xi'an Jiaotong University;
参考文献(References):
- [1]王企鲲,戴韧,陈康民.离心风机梯形截面蜗壳内旋涡流动的数值模拟[J].工程热物理学报,2004,25(1):66-68.
- [2]陈修怀,李嵩,黄东涛,等.利用三维数值模拟改进离心通风机设计[J].风机技术,2003,(2):62-81.
- [3]傅松,于淑梅,杨永利.锅炉离心式风机进气箱内流场的数值模拟[J].华北电力大学学报,2003,30(2):68-70.
- [4]徐辰,杨爱玲,毛义军.离心风机噪声预测方法的进展与分析[J].流体机械,2011,39(7):42-47.
- [5]赵婷,赵忖,任刚,等.倾斜蜗舌对离心风机降噪影响的试验研究[J].流体机械,2012,40(3):8-14.
- [6]宋虎堂,李培宁.蜂窝紧凑结构螺旋板换热器[J].压力容器,2010,27(4):17-19.
- [7]谢少军,潘柏松,陈栋栋,等.基于试验设计法的风机叶片铺层结构分析及优化[J].机电工程,2012,29(2):41-44.
- [8]李娜.徐政.PSS/E中的双馈风机模型[J].机电工程,2012,29(9):24-28,17.
- [9]徐长棱,毛义军,李凯,等.离心通风机整机三维流场的数值模拟.风机设计[J].风机技术,2005,(5):5-8.