黄思,岳乐,罗力,杨国蟒
HUANG Si,YUE Le,LUO Li,YANG Guo-mang (South China University of Technology

• 1:华南理工大学

摘要(Abstract)：

液环泵喷射器设计涉及较多的结构参数选取,用CFD计算对其性能优化时需要反复调整这些结构参数进行三维几何建模。通过喷射器几何建模的参数化设计,可避免繁琐的重复建模,提高三维流道几何模型的建模效率,缩短设计周期。本文采用Pro/toolkit二次开发技术对喷射器流道模型进行参数化设计,研究了Pro/toolkit的菜单设计、UI对话框和MFC对话框设计技术。以VC++6.0为编译和连接工具开发了喷射器的参数化设计程序,大大提高了建模效率。
Many geometric demensions are involed in the air ejector.So it is inefficient to optimize the design by revising the demensions repeatedly on the 3D model directly.To avoid this duplicated labor and improve the optimal design efficiency,a program is developed to model the fluid domain of the ejector automatically.This paper presents the program development of air ejector based on Pro/ENGINEER and explores the menu design with Pro/toolkit,UI dialog design and MFC dialog design.The program development uses VC++6.0 compile and link as a tool for the model parameter calculation interface and design interface,which greatly improves the efficiency of modeling.

关键词(KeyWords)： 液环泵喷射器;Pro/TOOLKIT;二次开发
air ejector;Pro/toolkit;secondary development

Abstract:

Keywords:

基金项目(Foundation):

作者(Author): 黄思,岳乐,罗力,杨国蟒
HUANG Si,YUE Le,LUO Li,YANG Guo-mang (South China University of Technology

参考文献(References)：

• [1]徐海涛,桑芝富.蒸汽喷射器喷射系数计算的热力学模型[J].化工学报,2004,55(5):704-710.
• [2]陈修娟,肖立川,许景伟.结构参数对喷射器内二维流场的影响[J].热力发电,2009,38(3):40-47.
• [3]祝金丹.蒸汽喷射器的设计及CAD软件系统的开发[D].南京:南京工业大学,2006.
• [4]龙新平,张洪波,杨盘,等.基于Pro/TOOLKIT的射流泵三维造型的二次开发[J].武汉大学学报,2006,39(2):20-23.
• [5]水环—大气喷射真空泵研究试验报告[Z].佛山水泵厂,1998.
• [6]张峰,李兆前,黄传真.参数化设计的研究现状与发展趋势[J].机械工程师,2002,(1):13-15.
• [7]Zheng Ling,Deng Zhaoxiang,Li Yinong.Parametricdesign of an electrorheological shock absorber with themixed-mode[J].Journal of Chongqing University(English.Edition),2003,(2):16-19.
• [8]Rinderle J R.Grammatical approaches to engineeringdesign,part II:Melding configuration and parametricdesign using attribute grammars[J].Research in En-gineering Design,1991,2(3):137-146.
• [9]李世国.Pro/TOOLKIT程序设计[M].北京:机械工业出版社,2003.
• [10]谭浩强.C++程序设计[M].北京:清华大学出版社,2004.