流体机械

2011, v.39;No.468(06) 1-4

[打印本页] [关闭]
本期目录(Current Issue) | 过刊浏览(Archive) | 高级检索(Advanced Search)

污水处理搅拌机的水力设计与试验研究
Hydraulic Design and Experimental Study on the Wastewater Treatment Mixer

田飞,施卫东,陈斌,曹卫东,李善庭
TIAN Fei1,SHI Wei-dong1,CHEN Bin1,2,CAO Wei-dong1

摘要(Abstract):

针对目前国内污水处理搅拌池内流场测试研究空白,为研究污水处理搅拌机性能,选用NACA翼型,应用升力法对污水处理搅拌机叶片进行水力设计,并对搅拌池内流体流场分布进行试验研究。在设计的试验台上,利用流速仪,通过空间布点测量了污水搅拌池内不同位置的流体速度。利用EXCEL软件绘制了污水处理搅拌池内不同位置截面上的流体速度分布图,分析了池内流体速度分布规律。流体速度沿着轴向传递明显,流体径向扩散相对较小,且污水搅拌池内流体的流速基本沿污水处理搅拌机轴对称分布。试验表明:该测量方法可行,且该污水处理搅拌机具有明显的轴向导流和减少池壁边界对池内流体的影响作用。
For blank of the wastewater treatment flow field testing and to study the performance of wasterwater treatment mixer,blade was designed by using the lifting design method,and the velocity flow field distribution in the wasterwater mixing pool was experimental studied.On the test bed designed by ourselves,the fluid velocity at the different points of the pool was measured by using the velocity instrument.The velocity distribution graphes of the different section in the wastewater mixing pool were drawn by software EXCEL,and the velocity distribution rule was analyzed.The fluid flow obviously transfers along the axial direction of wastewater treatment mixer but little diffuses along the radial direction,and fluid velocity symmetrical along the mixer axis.The experimental results indicate that the wastewater treatment mixer can guide flow in axial direction,and it can reduce the effect of boundary of pool wall on the fluid in pool.

关键词(KeyWords): 污水处理搅拌机;水力设计;试验研究;流场分析
wasterwater treatment mixer;hydraulic design;experimental study;flow field analysis

Abstract:

Keywords:

基金项目(Foundation): 创新基金江苏高等学校优秀创新团队项目(苏科技[2009]10号);; 江苏省产学研前瞻性联合研究项目(BY2010131);; 江苏省普通高校研究生科研创新计划项目(CX10B-164Z)

作者(Author): 田飞,施卫东,陈斌,曹卫东,李善庭
TIAN Fei1,SHI Wei-dong1,CHEN Bin1,2,CAO Wei-dong1

扩展功能
本文信息
服务与反馈
本文关键词相关文章
本文作者相关文章
中国知网
分享