林金国,曾小林,童小川,寿旭日,李家乐
LIN Jin-guo,ZENG Xiao-lin,TONG Xiao-chuan,SHOU Xu-ri,LI Jia-le

• 1:中船重工第七〇四研究所

摘要(Abstract)：

为提高动态工况下某蒸汽阀流量的控制精度,实现开度-流量的精确控制设计,采用CFD方法对其内部流场进行了数值模拟研究,以获取流量系数-开度的关系式。首先利用水介质的计算结果与前期试验结果进行比较,对有限元模型进行了验证。此后,采用蒸汽对不同开度及压差下蒸汽阀内部的流场进行了模拟计算,借鉴节流装置可压缩流体的流量方程式,获得了蒸汽阀流量特性曲线及关系式,并将其结果与理想气体得到的流量系数结果进行了对比分析,结果表明利用理想气体代替蒸汽进行流量特性研究具有一定的合理性。
In order to improve the accuracy of the dynamic In order to improve the flow control accuracy of a steam control valve under the dynamic conditions,to achieve the degree of the opening-flow control design,using CFD methods to simulate the flow field,and then obtain the relation of flow coefficient-the opening. Firstly,the results of the aqueous medium and the previous experimental results were compared to validate the finite element model. Then,the flow field under different degree of opening and pressure of the steam valve was simulated by using steam,and the steam valve flow character and relationship was obtained by consulting flow equation of the throttling device compressible fluid,and the flow coefficient were compared to the result obtained by ideal gas,the results showed that the use of the ideal gas instead of steam to study flow character has a certain rationality.

关键词(KeyWords)： 蒸汽阀;数值模拟;流量特性
stream valve;numerical simulation;flow character

Abstract:

Keywords:

基金项目(Foundation):

作者(Author): 林金国,曾小林,童小川,寿旭日,李家乐
LIN Jin-guo,ZENG Xiao-lin,TONG Xiao-chuan,SHOU Xu-ri,LI Jia-le

参考文献(References)：

• [1]车渊博,李春,高坤,等.调节阀内部流场的动态模拟及优化分析[J].能源研究与信息,2010,26(3):173-178.
• [2]袁新明,贺治国,毛根海.用RNG k-ε紊流模型对截止阀三维紊流流动的数值模拟[J].流体机械,2006,34(2):34-38.
• [3]冯卫民,肖光宇,袁波,等.基于数值仿真的蝶阀性能对比分析[J].灌排机械工程学报,2010,28(4):315-319.
• [4]王玲,王福军,张嘉辰,等.压力波动预止阀对泵站水锤的影响[J].排灌机械工程学报,2013,31(5):413-417.
• [5]Yang Qin,Zhang Zhiguo,Liu Mingyue,et al.Numerical Simulation of Fluid Flow Inside the Valve[J].Procedia Engineering,2011,23:543-550.
• [6]徐克鹏,蔡虎,崔永强,等.600MW汽轮机高压联合进汽阀内部流场的数值模拟[J].工程热物理学报,2001,22(5):555-558.
• [7]王继宏,刘建军,崔永强,等.高压联合进汽阀门三维粘性流场数值分析[J].工程热物理学报,2000,21(5):573-575.
• [8]屠珊,孙弼,毛靖儒.汽轮机GX-1型调节阀流动特性的试验与数值研究[J].西安交通大学学报,2003,37(11):1124-1127.
• [9]Srikantha C,Bhasker C.Flow analysis in valve with moving grids through CFD techniques[J].Advances in Engineering Software,2009,40:193-201.
• [10]黄津津.600MW超临界汽轮机主蒸汽阀门结构强度与流场分析[D].上海:上海交通大学,2007.
• [11]钟刚云,冯玲,吴其林,等.大功率汽轮机调节级级段气动特性研究[J].热力透平,2011,40(1):11-15.
• [12]刘建瑞,李昌,刘亮亮,等.高温高压核电闸阀流固热耦合分析[J].流体机械,2012,40(3):23-27.
• [13]徐承韬,何利源,蔡胜年,等.电磁阀动作寿命试验系统设计[J].流体机械,2012,40(10):66-69.
• [14]孙斌,许安俊.高压止回阀断裂失效分析[J].压力容器,2012,29(1):67-72.
• [15]孙淮清,王建中.流量测量节流装置设计手册(第二版)[M].北京:化学工业出版社,2005.4.