大型灯泡贯流泵机组电机冷却系统比较Comparison of Motor Cooling System of Large Bulb Tubular Pump Unit
申剑,仇宝云,裴蓓,黄海田,黄根,杨兴丽
SHEN Jian,QIU Bao-yun,PEI Bei,HUANG Hai-tian,HUANG Gen,YANG Xing-li(Yangzhou University
摘要(Abstract):
从可靠性、经济性和维修性等不同角度,分析比较了灯泡贯流泵机组电机开敞式强迫空气冷却-水外冷、密闭式强迫空气循环冷却-水外冷和定子水冷-转子空冷3种典型电机冷却方式的特点。结果表明,开敞式强迫空气冷却-水外冷系统安装维修性及可靠性较好;密闭式强迫空气循环冷却-水外冷电机温升均匀,延长电机绝缘寿命;定子水冷-转子空冷系统冷却费用低、冷却效果好。成果对选用和设计电机冷却系统有一定参考价值。
The three types of motor cooling system of large bulb tubular pump unit,open forced air-cooling and outer water-cooling,closed forced circular air-cooling and outer water-cooling and stator water-cooling and rotor air-cooling,were analyzed and compared from the aspects of the system's safety,economy,maintenance and so on.Results indicate that open forced air-cooling and outer water-cooling system has the best installation,maintainability and reliability,closed forced circular air-cooling and outer water-cooling system makes the motor's temperature rise symmetrically and prolong the motor's insulated life,stator water-cooling and rotor air-cooling system has low cooling expenses and the best cooling effect.The results could provide references to design and select motor cooling system.
关键词(KeyWords):
灯泡贯流泵机组;电机冷却方式;密闭式通风;开敞式通风;水冷
tubular pump unit;motor cooling methods;open ventilation;closed ventilation;water cooling
基金项目(Foundation): “十一五”国家科技支撑计划重大项目(2006BAB04A03);; 全国百篇优秀博士学位论文作者专项资金资助项目(2007B41);; 江苏省六大人才高峰计划专项资金资助项目(4025C)
作者(Author):
申剑,仇宝云,裴蓓,黄海田,黄根,杨兴丽
SHEN Jian,QIU Bao-yun,PEI Bei,HUANG Hai-tian,HUANG Gen,YANG Xing-li(Yangzhou University
参考文献(References):
- [1]唐群一.新安江水电厂发电机通风系统改造[J].大电机技术,1997,27(6):6-11,19.
- [2]高天德.有关灯泡贯流水轮发电机通风冷却技术的初步探讨[J].大电机技术,1992,22(3):1-8.
- [3]费树年.灯泡式发电机通风系统的设计特点[J].国外大电机,1998,28(4):10-14.
- [4]费树年.大型灯泡贯流式水轮发电机通风冷却技术[J].东方电机,1999,27(1):44-46.
- [5]韩力,李辉,马辉,等.大型灯泡贯流式水轮发电机的通风与温升[J].大电机技术,2000,30(5):1-4.
- [6]刘长陆.马骝滩灯泡贯流式水轮发电机设计综述[J].大电机技术,1996,26(4):6-12.
- [7]叶凡,刘大为.江口电站灯泡贯流式水轮发电机设计[J].大电机技术,2001,31(2):1-4.
- [8]Gu Guobiao,Ruan Lin.The development of coolingtechniques for hydrogenerators’reliability,mainte-nance,economic performance[A].Sixth InternationalConference on Electrical Machines and Systems[C].2003:112-118.
- [9]Tang W H,Wu Q H,Richardson Z J.Equivalent heatcircuit based power transformer thermal model[J].IEEProceedings-Electric Power Applications,2002,149(2):87-92.
- [10]阮琳.大型发电机的冷却及特点[J].电气时代,2001,21(6):38-40.
- [11]王鹏宇.万家寨水电站发电机通风系统及转子磁极改造[J].电力学报,2005,20(1):68-70.
- [12]Koyfman A,Jelinek M,Levy A,et al.An experimentalinvestigation of bubble pump performance for diffusionabsorption refrigeration system with organic workingfluids[J].Applied Thermal Engineering,2003,23(15):1881-1894.
- [13]Saravananl R,Matya M P.Experimental analysis of abubble pump operated H2O-LiBr vapour absorptioncooler[J].Applied Thermal Engineering 2003,23(18):2383-2397.
- [14]仇宝云,汤正军,黄海田,等.大型水泵机组大修与大修周期分析[J].水泵技术,1998,27(3):40-42.
- [15]傅耀,王彤,谷传纲,等.电机转子内部通风冷却系统的流动分析与结构改进[J].工程热物理学报,2008,29(10):1679-1681.
- [16]白延年.水轮发电机设计与计算[M].北京:机械工业出版社,1982,610-615.
- 灯泡贯流泵机组
- 电机冷却方式
- 密闭式通风
- 开敞式通风
- 水冷
tubular pump unit - motor cooling methods
- open ventilation
- closed ventilation
- water cooling