晏刚,吴建华,吴业正,李晓明,孙民
YAN Gang~1,WU Jian-hua~1,WU Ye-zheng~1,LI Xiao-ming~2,SUN Min~2(1.Xi'an Jiaotong University,Xi'an 710049,China;2.Xi'an Qingan Refrigeration Equipment Co.,Ltd.,Xi'an 710075,China)

• 1:西安交通大学
• 2:西安交通大学
• 3:西安交通大学
• 4:西安庆安制冷设备股份有限公司

摘要(Abstract)：

在滚动转子式压缩机内由于间隙配合造成的制冷剂泄漏中,转子径向间隙的泄漏量最大,它主要是以溶于润滑油的形式泄漏的。考虑到转子径向间隙的动态变化,利用润滑油流动模型来计算它的制冷剂泄漏量,并通过保持其他配合间隙不变只改变转子径向间隙的性能试验来验证泄漏对滚动转子式压缩机性能的影响。合理设计转子径向配合的间隙值,可以有效地降低滚动转子式压缩机的泄漏损失。
Among refrigerant leakages are caused by clearance fit in rolling piston compressors,the maximal amount of leakage is occurred in the radial clearance,which is mainly processed by the mode that the refrigerant dissolves into the lubricant.The sequential changes of the radial clearance are considered in this paper.It uses lubricant's flow model to calculate the amount of leakage of refrigerant in the system,and validates the effect of leakage on the rolling piston compressor through the performance experimentation of changing radial clearance individually,while other clearance fits are not altered.So,the leakage losses of rolling piston compressor can be reduced effectively by designing the value of leakage clearance rationally.

关键词(KeyWords)： 滚动转子式压缩机;径向间隙;泄漏
rolling piston compressor;radial clearance;leakage

Abstract:

Keywords:

基金项目(Foundation): 西安交通大学在职博士基金项目

作者(Authors): 晏刚,吴建华,吴业正,李晓明,孙民
YAN Gang~1,WU Jian-hua~1,WU Ye-zheng~1,LI Xiao-ming~2,SUN Min~2(1.Xi'an Jiaotong University,Xi'an 710049,China;2.Xi'an Qingan Refrigeration Equipment Co.,Ltd.,Xi'an 710075,China)

参考文献(References)：

• [1]Yanagisawa T,Shimizu T.Leakage Losses with a RollingPiston Type Rotary Compressor I Radial Clearance on theRolling Piston[J].Int.J.Refrig,1985,8(2):75-84.
• [2]Yanagisawa T and T Shimizu.Leakage Losses with aRolling Piston Type Rotary Compressor II Leakage Lossesthrough Clearance on Rolling Piston[J].Int J Refrig,1985,8(3):152-158.
• [3]Gybarg F,et al.A Simulation Model Fixed Vane RotaryCompressor Using Real Gas Properties[A].In.Proc.Ofthe 1984 ICECP[C].1984.33-39.
• [4]Pandeya P,et al.Rolling Piston Type Rotary Compressorwith Special attention to Friction and Leakage[A].In:Proc of the 1978 ICECP[C].1978.
• [5]Janghee Lee.Performance Analysis of Rolling Piston TypeRotary Compressor[A].In:Proc of the 1988 ICECP[C].1988.
• [6]吴建华.变频转子压缩机性能及动力特性研究[D].西安:西安交通大学,1998.
• [7]周桂如.流体润滑理论[M].杭州:浙江大学出版社,1990.
• [8]Sakurai E.The Prediction of Friction Losses in VariableSpeed Rotary Compressor[A].In:Proc.of l984 ICECP[C].1984,331-338.