姜绪彪
JIANG Xu-biao

• 1:惠州市大亚湾华德石化有限公司

摘要(Abstract)：

根据长输管道下游炼厂的需求,本文论述的多工况高扬程单级双吸离心泵需满足1400、1100和650m3/h 3种运行工况。本文对其国产化应用进行了研究分析,着力解决了如下问题:国产泵组在偏离额定工况下的振动超标,泄漏、自润滑轴承温度高等问题。结果表明,该泵结构合理、流量范围宽,满足多工况工艺生产要求,振动、泄漏、温度等主要指标达到同类进口泵技术水平。该泵的成功应用,对提高长输管道输油泵国产化制造水平,优化离心泵的设计、选型、维护管理等有一定的借鉴意义。
According to the actual demands of downstream refinery,pipeline pump is designed to single- stage double suction centrifugal pump for the flow rate of 1400m3/ h,1100m3/ h 和 650m3/ h. To solve the following problems,this paper carried on the research analysis to the application of domestic pump. When the working conditions deviate the rated conditions,the vibration of domestic pump exceed the standard. Leakage and bearing temperature is also studied. All the results show that: the structure of pump is reasonable,the range of flow rate is wide. Main index such as vibration,leakage,temperature et meet the standard of importing pump for the production requirements of multiple working conditions. The successful application of the pump improve the level of domestic production of pipeline pumps. It also provides certain references for design,maintenance management and selection of optimization of centrifugal pump.

关键词(KeyWords)： 长输管道;多工况;输油泵;国产化;振动;温度
pipelines;multiple working conditions;pump;domestic;vibration;temperature

Abstract:

Keywords:

基金项目(Foundation):

作者(Author): 姜绪彪
JIANG Xu-biao

参考文献(References)：

• [1]王秀勇,程效锐,黎义斌.KSY1100-268单级双吸离心泵流场分析及性能预测[R].甘肃:兰州理工大学,2011.
• [2]李希春.KSY1100-268单级双吸离心泵叶轮选型图[R].湖南:湖南天一奥星泵业有限公司,2011.
• [3]韩文海,周晶,袁婕.腐蚀缺陷管道极限弯矩承载力分析[J].化工设备与管道,2013,50(6):64-67,78.
• [4]周正富,陈松山,何钟宁.离心泵叶轮内部流动的PIV正交测量[J].排灌机械工程学报,2013,31(12):1045-1060.
• [5]余伟炜,田阳,薛飞,等.热老化对主泵泵壳材料失效评定曲线的影响研究[J].压力容器,2014,31(5):23-29,12.
• [6]郑军,杨昌明,朱利,等.离心泵叶轮流固耦合分析[J].流体机械,2013,41(2):25-29.
• [7]杨军虎,王玥,郭斌,等.叶片进口边位置对双吸离心泵性能的影响分析[J].流体机械,2013,41(1):49-52,34.
• [8]KSY1100-268型输油泵轴系临界转速及振型计算书[R].江苏:江苏大学流体机械工程技术研究中心,2011.