高压空气管网系统阀内流体计算及泄漏分析Calculation of In-valve Fluid and Leakage Analysis of High Pressure Air Pipe Network System
谢江辉,尚进,张德满,羊慧,雷金,李辉
XIE Jiang-hui,SHANG Jin,ZHANG De-man,YANG Hui,LEI Jin,LI Hui
摘要(Abstract)：
对高压空气管网系统中的电磁阀内部空气流动及垫片处的泄漏进行研究,首先对管道中的电磁阀进行三维建模,运用流体力学FLUENT软件的动网格技术,计算出不同的开关阀工况下在管道内部形成的压力脉冲,并将管道内部形成的最大压力脉冲,结合密封件泄漏的理论计算验证方法,分析计算以判断高压空气管网是否会产生泄漏。最后根据仿真结果提出防止泄漏的有效方法,为工业中保证高压管道安全运行提供参考。
The air flow inside the solenoid valve and the leakage at the gasket in the high pressure air pipe network system were studied. Firstly,a three-dimensional model was built for the solenoid valve in the pipe,and the dynamic grid technology of FLUENT software was used to calculate the pressure pulse generated inside the pipeline under different on-off operating conditions of the valve,and the maximum pressure pulse formed inside the pipeline was combined with the verification method for theoretical calculation of the leakage of the seal in order to judge whether leakage occurs or not with the high-pressure air pipeline network through analysis and calculation. Finally,according to the simulation results,an effective method to prevent leakage was proposed,which provides reference for the operation of industrial high-pressure pipelines.
关键词(KeyWords)：
高压空气管网;电磁阀;压力脉冲;瞬态特性
high pressure air pipe network;solenoid valve;pressure pulse;transient characteristics
基金项目(Foundation):
作者(Author):
谢江辉,尚进,张德满,羊慧,雷金,李辉
XIE Jiang-hui,SHANG Jin,ZHANG De-man,YANG Hui,LEI Jin,LI Hui
参考文献(References)：
- [1]李化锦.垫片密封失效因素分析[J].辽宁化工,2013,42(8):1007-1009.
- [2]李伟,何毅斌,王彦伟,等.新型线香机设计及间隙密封流场仿真分析[J].机电工程,2013,33(6):713-717.
- [3]钱锦远,朱银法,刘步展,等.垂直管线性先导式截止阀的阀芯运动过程数值分析[J].排灌机械工程学报,2016,34(1):51-56.
- [4]陈汇龙,任坤腾,李同,等.乳液设备机械密封端面改型及冲洗降耗分析[J].排灌机械工程学报,2017,35(13):235-242.
- [5]冯秀,顾伯勤,孙见君,等.金属垫片密封机制研究[J].润滑与密封,2007,32(10):97-99.
- [6]袁新明,贺治国,毛根海.用RNG k-ε紊流模型对截止阀三维紊流流动的数值模拟[J].流体机械,2006,34(2):34-38.
- [7]Song X G,Wang L,Young C P.Transient analysis of a spring-loaded pressure safety valve using computational fluid dynamics(CFD)[J].ASME,2010,132:054501/1-054501-5.
- [8]宋治伟,崔宝玲,尚照辉,等.截止阀启闭过程内部瞬态流动特性[J].工程热物理学报,2012,32(6):957-960.
- [9]孙羽佳.LDPE装置一次压缩机出口高压管道设计[J].化工设备与管道,2017,54(5):63-68.
- [10]张姗姗,颜文旭,公群.高压脉冲电场处理室多物理场仿真研究[J].包装与食品机械,2016,34(3):38-41.
- [11]王崇好,李保国,高志新.肉类食品清洗解冻装置的研究进展[J].包装与食品机械,2017,35(4):62-65.
- [12]陆培文.阀门设计入门与精通[M].北京:机械工业出版社,2009:1-3.