苏之勇,寇景康,李海军,崔四齐,翟俊杰
SU Zhiyong,KOU Jingkang,LI Haijun,CUI Siqi,ZHAI Junjie

• 1:中原工学院能源与环境学院

摘要(Abstract)：

为了研究在车用热泵系统中，电子膨胀阀过热度设定值对系统制热性能的影响，搭建车用热泵系统实验台，在超低温工况-10 ℃下，通过电子膨胀阀对蒸发器出口过热度、压缩机排气口过热度进行控制，分析电子膨胀阀过热度设定值对系统主要制热性能参数的影响。结果表明：当主阀过热度设定值从1 ℃升高到9 ℃时，压缩机排气温度随之升高，系统制热量降低了14.2%，压缩机功率降低了20.0%。当补阀过热度设定值从10 ℃升高到30 ℃时，压缩机排气温度随之升高，系统制热量降低了23.0%，压缩机功率降低了29.2%。主阀过热度最优设定值为5 ℃，补阀过热度最优设定值为20 ℃，此时系统制热能效比达到最佳。
In order to study the influence of superheat set value of electronic expansion valve on the heating performance of the system，the experimental platform for vehicle heat pump system was built.Under the ultra-low temperature condition of-10 ℃，by controlling the superheat set values of evaporator outlet and compressor exhaust port by the electronic expansion valves，the influence of the superheat set values of the electronic expansion valve on the main heating performance parameters of the system was analyzed.The results show that when the superheat set value of the main valve increases from 1 ℃ to 9 ℃，the exhaust temperature of the compressor increases，the heating capacity of the system decreases by 14.2%，and the compressor power decreases by 20.0%.When the superheat set value of the make-up valve increases from 10℃ to 30 ℃，the exhaust temperature of the compressor increases，the heating capacity of the system decreases by 23.0%，and the compressor power decreases by 29.2%.When the optimal set value of superheat of the main valve is 5 ℃，and the optimal set value of superheat of the make-up valve is 20 ℃，the heating energy efficiency ratio of the system is the best.

关键词(KeyWords)： 车用热泵;电子膨胀阀;过热度;制热性能
automotive heat pump;electronic expansion valve;superheat;heating performance

Abstract:

Keywords:

基金项目(Foundation): 国家自然科学基金项目(51676201);; 河南省重点科技攻关项目(202102310230);; 中原工学院自主创新应用研究项目(K2019YY013)

作者(Author): 苏之勇,寇景康,李海军,崔四齐,翟俊杰
SU Zhiyong,KOU Jingkang,LI Haijun,CUI Siqi,ZHAI Junjie

参考文献(References)：

• [1]KWON C，KIM M S，CHOI Y，et al.Performance evaluation of a vapor injection heat pump system for electric vehicles[J].International Journal of Refrigeration，2017，74：138-150.
• [2]LEE D.Experimental study on the heat pump system using R134a refrigerant for zero-emission vehicles[J].International Journal of Automotive Technology，2015，16：923-928.
• [3]曹健，苏林，张辛辛，孙等.电动汽车热泵两对腔涡旋压缩机补气特性研究[J].流体机械，2021，49(11)：18-24.CAO J，SU L，ZHANG X X，et al.Study on the characteristics of vapor injection of two-pair-chamber scroll compressor for electric vehicle heat pump system[J].Fluid Machinery，2021，49(11)：18-24.
• [4]周国梁，吴靖，王明玉.电动汽车热泵系统串并联余热回收试验研究[J].流体机械，2021，49(5)：91-96.ZHOU G L，WU J，WANG M Y.Experimental study of series and parallel waste heat recovery modes for electric vehicle heat pump system[J].Fluid Machinery，2021，49(5)：91-96.
• [5]刘明康，苏林，李康，等.某电动汽车热泵空调系统制冷剂充注量试验研究[J].流体机械，2020，48(5)：82-88.LIU M K，SU L，LI K，et al.Experimental study on refrigerant charge of heat pump air conditioning system in an electric vehicle[J].Fluid Machinery，2020，48(5)：82-88.
• [6]刘明康，苏林，方奕栋，等.电动汽车热泵空调系统冬季采暖性能实验研究[J].制冷学报，2020，41(4)：45-51.LIU M K，SU L，FANG Y D，et al.Experimental study on heating performance of electric vehicle heat pump air conditioning system in winter[J].Journal of Refrigeration，2020，41(4)：45-51.
• [7]田怀璋，朱瑞琪，刘星.电子膨胀阀技术综述[J].流体工程，1992，20(7)：55-60.TIAN H Z，ZHU R Q，LIU X.Review of electronic expansion valve technology[J].Fluid Engineering，1992，20(7)：55-60.
• [8]CHOI J M，KIM Y C.The effects of improper refrigerant charge on the performance of a heat pump with an electronic expansion valve and capillary tube[J].Energy，2002，27：391-404.
• [9]WANG D D，YU B B，HU J C，et al.Heating performance characteristics of CO2 heat pump system for electrical vehicle in a cold climate[J].International Journal of Refrigeration，2018，85：27-41.
• [10]BEGHI A，CECCHINAT L.A simulation environment for dry-expansion evaporators with application to the design of autotuning control algorithms for electronic expansion valves[J].International Journal of Refrigeration，2009，32(7)：1765-1775.
• [11]潘乐燕，王天英，牛凤仙，等.车用热泵系统结霜化霜实验研究[J].制冷学报，2020，41(6)：47-54.PAN L Y，WANG T Y，NIU F X，et al.Experimental study on frosting and defrosting of automotive heat pump system[J].Journal of Refrigeration，2020，41(6)：47-54.
• [12]李玉春，蔡志鸿，何永锋.带经济器的热泵热水机电子膨胀阀运行规律的研究[J].制冷学报，2013，34(1)：52-56.LI Y C，CAI Z H，HE Y F.Research on operation law of electronic expansion valve of heat pump water heater with economizer[J].Journal of Refrigeration，2013，34(1)：52-56.
• [13]章晓龙，李征涛，陈忆喆，等.电子膨胀阀对蒸发器过热度稳定性的影响[J].流体机械，2014，42(4)：72-75.ZHANG X L，LI Z T，CHEN Y Z，et al.Effect of electronic expansion valve on superheat stability of evaporator[J].Fluid Machinery，2014，42(4)：72-75.
• [14]秦海杰，衣永海.小型CO2热泵热水器膨胀阀控制策略试验研究[J].流体机械，2019，47(6)：52-55.QIN H J，YI Y H.Experimental study on expansion valve control strategy of small CO2 heat pump water heater[J].Fluid Machinery，2019，47(6)：52-55.
• [15]李卫国，郭宪民，孙涛.使用电子膨胀阀的热泵热水器动态性能数值模拟与实验研究[J].制冷学报，2011，32(4)：25-29.LI W G，GUO X M，SUN T.Numerical simulation and experimental study on dynamic performance of heat pump water heater with electronic expansion valve[J].Journal of Refrigeration，2011，32(4)：25-29.
• [16]严瑞东，施骏业，陈江平.蒸发器出口过热度对汽车空调性能影响的实验研究[J].制冷学报，2014，35(3)：86-89.YAN R D，SHI J Y，CHEN J P.Experimental study on the influence of evaporator outlet superheat on the performance of automotive air conditioning[J].Acta Refrigerating Sinica，2014，35(3)：86-89.