张塬东,张琼,吴大转,武鹏
ZHANG Yuan-dong,ZHANG Qiong,WU Da-zhuan,WU Peng

• 1:浙江大学
• 2:杭州川空通用设备有限公司

摘要(Abstract)：

为改善立式双级无密封自吸泵效率低和噪声大的问题,在分析传统立式自吸泵结构和内部流动的基础上,提出一种改进型立式双级自吸泵,给出了新型自吸泵蜗壳结构和密封口环形式,在保证自吸性能的前提下,有效提升了效率。利用CFD分析软件对传统立式双级自吸泵结构和改进结构进行内部流动的数值模拟,对性能进行了对比分析,并研究了蜗室与气液分离室的匹配和不同密封口环形状和尺寸对泵效率的影响。数值模拟和试验结果吻合良好,能够说明自吸泵内部流动机理。结果显示,相比传统直边叶轮口环结构,采用L型密封口环后的自吸泵容积效率得到明显提高;采用改进的蜗室和储液室匹配,降低了过渡流道的水力损失,有效提高了自吸泵的效率和稳定性。
In order to solve the problems of low efficiency and high noise level of a vertical double-stage self-priming pump, the new volute chamber and annular sealing of impeller are presented on basis of the traditional self-priming pump under the premise of ensuring the self-priming performance. The internal flow field of the tradition self-priming pump and a novel structure were numerically simulated using the CFD tool, the internal flow structure and performance were analyzed. The matching structures between the volute and the liquid storage chamber were optimized, and the pump performance under annular sealing with different shapes and sizes was also analyzed. The numerical simulation results are in good agreement with the experimental results, the results show that the L type annular sealing, compared to the traditional annular sealing structure, improved the volume efficiency of the self-priming pump obviously; New volute chamber and liquid storage chamber are better matched to reduce the hydraulic loss and improve efficiency and stability of the double-stage self-priming pump.

关键词(KeyWords)： 自吸泵;立式双级泵;密封口环;容积效率;数值模拟
self-priming pump;vertical double-stage pump;annular sealing;volume efficiency;numerical simulation

Abstract:

Keywords:

基金项目(Foundation):

作者(Author): 张塬东,张琼,吴大转,武鹏
ZHANG Yuan-dong,ZHANG Qiong,WU Da-zhuan,WU Peng

参考文献(References)：

• [1]HUANG Si,SU Xianghui,GUO Jing,et al.Unsteady numerical simulation for gas-liquid two-phase flow in self-priming process of centrifugal pump[J].Energy Conservation and Management 85(2014)694-700.
• [2]吴大转,许斌杰,武鹏,等.多级离心泵内部间隙流动与泄露损失[J].浙江大学学报:工学版,2011,45(8):1393-1398.
• [3]李红,徐德怀,李磊,等,自吸泵自吸过程瞬态流动的数值模拟[J].排灌机械工程学报,2013,31(7):565-569.
• [4]Bjorn-Christian Will,Friedrich-Karl Benra,HansJosef Dohnmen.Investigation of the flow in the impeler side clearances of a centrifugal pump with volute casing[J].Journal of Thermal Science 2012,21(3):197-208.
• [5]施卫东,高雄发,张德胜,等.叶轮口环间隙对井用潜水泵性能的影响[J].排灌机械工程学报,2013,31(8):651-655.
• [6]李文广,费振桃,蔡永雄.离心油泵叶轮口环间隙对性能的影响[J].水泵技术,2004(5):7-13.
• [7]孙幼波,陈涛,杨帅,等.立式自吸泵水力性能分析及内部结构的改进[J].浙江大学学报:工学版,2013,47(2):332-338.
• [8]赵国伟,孙建平.基于CFD的离心泵口环间隙流动研究[D].武汉:华中科技大学,2006.
• [9]王洋,张翔.叶轮口环间隙对低比转速泵效率的影响[J].排灌机械,2008,26(6):27-30.
• [10]ZHAO Binjuan,YUAN Shouqi,LIU Houlin,et al,threedimensional couple impeller-volute simulation of flow in centrifugal pump and performance prediction[J].Chinese Journal of Mechanical Engineering,2006,19(1):59-62.
• [11]LIU Hou-lin,LIU Dong-xi,WANG Yong.Application of modified k-ωmodel to predicting cavitating flow in centrifugal pump[J].Water Science and Engineering,2013,6(3):331-339
• [12]SYEN Noman Danish,MA Chaochen,YANG Ce,et al.Comparison of two methods to increase tip clearance and its effect on performance of turbocharger centrifugal compressor stage[J].Chinese Journal of Mechanical Engineering,2007,20(4):60-65.
• [13]徐平,沈佳兴,王慧.四径向轮齿轮泵优化设计及仿真[J].流体机械,2015,43(1):33-37.
• [14]罗向阳,权凌霄,关庆生,等.轴向柱塞泵振动机理的研究现状及发展趋势[J].流体机械,2015,43(8):41-47.
• [15]陈永军,刘道平,眭阳,等.冷态工况下变截面管气泡泵提升特性试验研究[J].流体机械,2015,43(3):47-51.
• [16]孙晓盼,李晶,刘红卫,等.基于TRIZ理论的乳化液泵曲轴偏心问题研究[J].机电工程,2015,32(9):1206-1209.
• [17]王洋,彭帅,刘瑞华,等.旋涡自吸泵内部流场压力脉动数值模拟[J].排灌机械工程学院,2015,33(7):583-588.
• [18]关醒凡.现代泵理论与设计[M].北京:中国宇航出版社,2005:424-430.