杨敏官;肖胜男;康灿;
YANG Min-guan,XIAO Sheng-nan,KANG Can (Jiangsu University,Zhenjiang 212013,China)

• 1:江苏大学

摘要(Abstract)：

提出将中心体喷嘴与异形喷嘴组合以产生更好的空化射流效果的思路。采用Mixture多相流模型,在15MPa的射流压力下,对正方形出口、三角形出口和圆形出口3种中心体喷嘴产生的淹没射流流场进行数值计算,重点对轴向速度、径向速度、湍动能和空泡相体积份额进行了对比分析。研究表明:圆形出口的中心体喷嘴比另两种异形出口的中心体喷嘴产生更高的射流速度和湍动能;正方形出口比三角形出口的中心体喷嘴的射流稳定性能更强,圆形出口的中心体喷嘴产生的集束性能较强;异形出口的中心体喷嘴产生的流场中,空泡相延伸距离更长,异形出口的中心体喷嘴产生的空化射流效果更好。
Combination of central-body nozzle and abnormal nozzle is presented to further improve cavitation jet performance.Under the jet pressure of 15MPa,three submerged jets were produced with square,triangle and circular outlet sections respectively.Those flows were numerically simulated through employing Mixture Multiphase Model.Axial and radial velocities,turbulence kinetic energy,volume fraction of cavitation zone were obtained thereby and analyzed comparatively.The study shows that adoption of circular-outlet central-body nozzle results in the highest axial jet velocity and turbulence kinetic energy.Square-outlet central-body nozzles are proved to be able to generate more steady jet flows than triangle-outlet central-body nozzles while circular-outlet central-body nozzles have more concentrated jet flows.Axial extension distances of cavitation zone in jet flow discharged from the abnormal-outlet central-body nozzles are longer than that in the circular jet,which indicates the abnormal-outlet central-body nozzles is more helpful in improving cavitation jet performance.

关键词(KeyWords)： 中心体喷嘴;异形出口;空化;数值模拟;Mixture模型
central-body nozzle;abnormal export;cavitation;numerical simulation;mixture model

Abstract:

Keywords:

基金项目(Foundation): 国家自然科学基金资助项目(50806031)

作者(Authors): 杨敏官;肖胜男;康灿;
YANG Min-guan,XIAO Sheng-nan,KANG Can (Jiangsu University,Zhenjiang 212013,China)

参考文献(References)：

• [1]李根生,沈忠厚.空化射流及其在钻井工程中的应用研究[J].石油钻探技术,1996,24(4):51-54.
• [2]葛强,李晓红,卢义玉,等.空化射流处理有机废水的机理[J].重庆大学学报,2007.30(5):20-22.
• [3]卢晓江,何迎春,赖纬.高压水射流清洗技术及应用[M].北京:化学工业出版社,2006.
• [4]孙家骏.水射流切割技术[M].徐州:中国矿业大学出版社,1992.
• [5]庄静伟,王强,史亮,等.高压水射流的发展与应用[J].木材加工机械,2007,18(4):47-49.
• [6]李根生,沈晓明,施立德,等.空化和空蚀机理及其影响因素[J].石油大学学报:自然科学版,1997,21(1):97-102.
• [7]薛胜雄.高压水射流技术与应用[M].北京:机械工业出版社,1998.
• [8]赖艳萍,赵欣,赖维,等.异形喷嘴射流特性的实验研究[J].轻工机械,2005,23(4):23-25.
• [9]刘庭成,白俊英,白春雪.高压水射流技术综述[J].冶金设备,1995,93(5):51-57.
• [10]刘成文,李兆敏.锥形喷嘴流量系数及水力参数的理论计算方法[J].钻采工艺,2000,23(5):1-3.
• [11]McCarthy M J,Molly N A.Review of Stability of liq-uid Jets and the Influence of Nozzle Design[J].TheChemical Engineering Journal,1995,(7):1-2.
• [12]李子丰.空化射流形成的判据和冲蚀机理[J].工程力学,2007,24(3):185-188.
• [13]付胜,李海涛,刘丽丽,等.空化水射流的形成方法及其应用研究[J].机械科学与术,2006,25(4):491-496.